Kuge Times X100 ALL IN ONE CD Phonograph User Manual

Kuge Times X100 ALL IN ONE CD Phonograph

Specifications

• Built-in battery: 2000MAH
• Supported formats: CD/CD-R/CD-RW/VCD/DVD
• Power source: Power port
• Connectivity: USB port, Headphone port, Audio input

Product Usage Instructions

Powering On and CD Playback

1. Open the swinging arm switch.
2. Place the CD into the disk placement area with the label face up.
3. Flick the singing arm switch to turn on the device. The indicator light will turn red.
4. The CD will start playing after about 5 seconds of reading.
5. Use the volume knob to adjust the volume.
6. Press the pause button to pause playback.

Remote Control Usage

• Make sure the battery insulation sheet of the remote control is removed.
• Ensure the remote control is aligned with the remote control signal induction position of the host.
• Keep the distance between the remote control and the host within 6 meters.
• Use the remote control to adjust volume, switch tracks, pause/play, and perform other functions.

Bluetooth Mode

1. Press down on the switch for 3 seconds to enter Bluetooth mode. The mode indicator will blink blue with a beep sound.
2. Open the Bluetooth settings on your mobile phone/tablet and search for “XlOO”.
3. Pair and connect your device with the product.
4. Once successfully paired, you can play audio through Bluetooth.

USB and Audio Input Modes

1. In CD music mode or Bluetooth mode, insert a U disk into the USB port to automatically enter U disk mode. The U disk will start playing.
2. To use the device as a sound box for computers or other equipment, insert a 3.5mm audio cable while in CD or Bluetooth mode. The device will automatically enter the input mode.
3. Note: Audio files on the U disk should be stored in the root directory and preferably in MP3 format.

Connecting Active Speakers or Power Amplifiers

1. Insert the corresponding audio line into the audio interface of the device.
2. Choose an audio line that corresponds to the interface of your speakers or amplifiers.

FAQ

The remote control doesn’t work.

• Make sure the battery insulation sheet is removed from the remote control.
• Check if the remote control is aligned with the host’s remote control signal induction position.
• Ensure the distance between the remote control and the host is within 6 meters.

The CD disc can’t play

• Make sure the disc is loaded with the label face up.
• Check if the disc has dirt, or scratches, or is a non-standard disc with a file format error.
• Note that playing other formats may cause loud noise or damage to the laser head.
• Do not use cracked discs as they may cause player failure.

What should I do if water spills into the device?
Immediately pull out the plug from the socket and contact the dealer to avoid any risk of electric shock or damage to the product.

Can I use this product with other functions?
If you want to use other functions, such as connecting to a computer as a sound box, you will need to pull out the first audio line and insert the desired audio cable.

MAIN COMPONENT

PARAMETER

• Product Name: All-In-One CD phonograph
• Product model: XlOO
• Product material: plastic+ wood grain
• Product color: Brown, White
• Packing list: CD machine xl, Charging cable xl, Remote control xl, Manual xl
• Distortion limit output power: 5W+5W
• Rated audio response range: lOOHz
• Noise level: “s25dB-15KHz
• Power input: DC 5V/2A(Type-C power supply)
• Power port: TYPE-C
• Support format: CD/CD-R/CD-RW/VCD/DVD/MP3/ WMA/ infrared remote control
• Product size: (L)2os•(W)l66.(H)63mm
• Battery capacity: 2000MAH

OPERATION

This product built-in a 2000MAH large battery opens the singing arm, and switches into CD /CD-R/CD-RW/VCD/DVD, It can be played.

Note

• It is recommended to charge and turn on after the first use.
• Use the original TYPE-C charging cable with a SV power adapter for charging.

An adapter that outputs more than SV will cause damage to the product.

1. Put in the disc, flick the singing arm switch, and the indicator light is red.The default is music mode.

2. Put the disc in and make sure the disc is properly stuck to the movement. Began to turn it into reading, start playing about 5 seconds.

3. Through the volume knob to ad」ust the volume, press the pause playback. Or use the remote control to complete the volume adjustment, up and down switch, pause play and other functions. !.Knob mode transition: Press down for 3 seconds to enter Bluetooth mode.The mode indicator blinks blue with a beep.2.0pen the Bluetooth of mobile phone/tablet, search: XlOO, and pair and connect. After a successful pairing, it can play.

4. ln CD music mode or Bluetooth mode, insert U disk, it will automatically enter U disk mode. Automatically play U disk.
   * Audio files should be stored in the root directory of the U disk. MP3 format is recommended.

5. CD or Bluetooth mode insert3.The Smm audio cable will automatically enter the in put mode. It can be used as a sound box for computers and other equipment. The audio cable should be brought or purchased. If you want to use other functions
   need to pull the first audio line.

6. The machine supports connecting active speakers or power amplifiers to improve sound effects. Insert the corresponding audio line audio interface. Audio lines need to be chosen according to the speakers or amplifier interface corresponding to the wire

FAILURE

The machine failure, please confirm the following content:

1. The remote doesn’t work.
   The battery insulation sheet of the remote control is not removed/The battery of the remote control is out of power/the remote control is not aligned with the remote control signal induction position of the host/the distance between the remote control and the host is more than 6 meters.

2. CD disc can’t play
   Disc loading without label face up/disc with dirt or scratches. Non-standard disc, disc type error or file format error.

WARNING

• Note that play other formats may cause loud noise, damage to the laser head, etc.
• cracked discs may cause player failure. Do not use them.
• If the disc has serious scratches, fingerprints, dirt, etc., it will cause product failure or shorten the life of the laser head.
• If water spills into it, please pull out the plug from the socket and contact the dealer.
• Do not touch the power cord when your hands are wet.To avoid the risk of electric shock, do not touch the internal parts.
• Prevent product drops, liquid splashes and intrusion of other objects.
• If the product does not work, slip, please contact professional service technicians.
• Power saving and safety, when not using this product for a long time, please make sure to completely interrupt the power supply.
  • Please contact the dealer when the line is damaged, detached or contact broken.
  • Please keep the product out of reach of children.
• Please properly dispose of the plastic bags.
• Please keep children out of contact to avoid choking or injury.
• Do not touch or look directly at the laser head to avoid damage device or eyesight

WARRANTY

Welcome to use the all-in-one CD phonograph Series XlOO. This product can enjoy the following after-sales service with this card:

1. Within 7 days from the date of purchase: In case of performance failure, you can choose to return, replace or repair the goods with the order voucher/three-pack voucher.
2. Within 15 days from the date of purchase: If performance failure occurs, you can choose replacement or repair according to the order voucher/three-package voucher.
3. Within 1 year from the date of purchase: If there is a performance failure that is not man-made damage, return to the factory with the order voucher/three-package voucher to enjoy free maintenance.
4. Any of the following cases does not belong to the scope of the three packages and needs to be repaired for a fee:
   • over the validity period of three packages, no valid order voucher and three packages voucher.
   • Not according to the requirements of the manual use, maintenance caused by damage, there are obvious man-made damage.
   • Damage caused by force majeure, such as liquid intake, water, broken, fire and other natural disasters.

To connect your phone to a Bluetooth speaker, please follow the following steps:

• Turn on the speaker and ensure it is in an available Bluetooth connection mode. This usually means that the speaker will emit a Bluetooth indicator light or sound to indicate that it is ready to receive connection requests.
• Turn on the Bluetooth function of the phone. This can be found in the “Settings” menu of the phone, or quickly accessed through shortcuts (usually a combination of volume down and power keys).
• Search and pair audio. In the Bluetooth settings of your phone, click on “Scan for Devices” or “Search for Devices” to discover nearby Bluetooth devices. After finding your audio system, click on its name to start the pairing process.
• Complete pairing. Once the pairing is successful, you should see a new connected device entry in the Bluetooth settings of your phone. The indicator light on the audio system may also stop flashing as a sign of successful connection.
• Play music. Now you can open the music playback application, select a song, and adjust the volume on your phone. Music should be played from the sound system.
• Please note that both the phone and audio system support the same Bluetooth version, such as at least Bluetooth 4.0 or higher. In addition, different audio systems may have specific connection requirements or processes, so it is best to consult the user guide of the audio system for detailed information

FCC warning statements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Caution
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>