KMINA K10060 All Terrain Rollator User Manual

: June 11, 2024
: KMINA

Table of Contents

KMINA K10060 All Terrain Rollator
Product Information
Product Usage Instructions
OVERVIEW
ASSEMBLY
USING INSTRUCTIONS
TECHNICAL SPECIFICATIONS
MATERIALS
PRECAUTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KMINA K10060 All Terrain Rollator

Product Information

The KMINA All Terrain Rollator is a walking device designed for people with reduced mobility who need support for walking.
The rollator comes with a seat for temporary use if you need to rest.
It can be easily folded for storage or transport.
The rollator has a backrest, seat basket, folding tape, handle brake, aluminum frame, step assist lever, and cane holder.
The rollator improves restricted ability to move around indoors and outdoors.
The handlebar has six adjustments every 1.2 cm.
The brake system of the rollator allows brakes to be operated by simply pushing the brake levers upwards.
The recommended tire pressure for the rollator is 30-35 psi.
The materials used are structure: aluminum, basket and backrest: polyester + PVC, wheels: rubber, and handles: PVC.
The maximum weight capacity of the rollator is 300 lb.

Product Usage Instructions

Assembly

Refer to the user manual for instructions on assembly.

Folding System

To unfold, pull out the handles until the walker opens fully and push down on the seat until it opens fully.
To fold the rollator, remove the basket from the walker and pull the strap on the seat upwards until the handles are together.

Height Adjustment

The handlebar has six adjustments every 1.2 cm. To adjust the correct height:
- Loosen the adjustment knob.
- Tighten the knob to secure the handle in place.

Brake System

When the walker is in motion, the brakes are operated by simply pushing the brake levers upwards.
To lock the brakes, press the brake levers down until you hear a locking sound. The wheels will be locked until you pull the brake levers up again.
To unlock the brakes, push the brake levers upward.
Brake pressure is adjusted by turning the adjusting nut, located on the top of the brake shoe, on the rear wheel.
- Turning the nut counterclockwise will increase the braking pressure.
- Turning the nut clockwise decreases the pressure required for braking.

The KMINA All Terrain Rollator has been designed as an aid for people with reduced mobility who need support for walking. It has a seat for temporary use if you need to rest. It can be easily folded for storage or transport. This rollator is a walking device that improves the restricted ability to move around indoors and outdoors.

OVERVIEW

ASSEMBLY

Remove the rollator from the box and pull the handles outward to unfold the rollator.
Place the backrest in the slots at the front of the walker.
Adjust the walker in one of its 6 settings to the desired height. To fix it, screw the nuts that come in the box onto the sides of the walker until they are completely fixed. Be sure to adjust both sides to the same height.
Hook the cane holder onto the tab on the left side of the walker.
Finally, insert the basket into the tubes at the front of the walker.

USING INSTRUCTIONS

FOLDING SYSTEM

To unfold, pull out the handles until the walker opens fully and push down on the seat until it opens fully.
To fold the rollator, remove the basket from the walker and pull the strap on the seat upwards until the handles are together.

HEIGHT ADJUSTMENT

The handlebar has six adjustments every 1.2”. To adjust the correct height:

Stand upright next to the walker, with shoulders relaxed and arms slightly positioned at 15°.
Adjust the handlebar height to the desired height and secure it with the adjusting nut.

BRAKE SYSTEM

When the walker is in motion the brakes are operated by simply pushing the brake levers upwards.

To lock the brakes, press the brake levers down until you hear a locking sound. The wheels will be locked until you pull the brake levers up again.
To unlock the brakes, push the brake levers upward.

Brake pressure is adjusted by turning the adjusting nut, located on the top of the brake shoe, on the rear wheel.

Turning the nut counterclockwise will increase the braking pressure.
Turning the nut clockwise decreases the pressure required for braking.

TECHNICAL SPECIFICATIONS

DEPTH| WIDTH| HEIGHT

(6 regulations)

| FOLDING DIMENSION
---|---|---|---
25.5”| 27.5”| 34” – 38.5”| 25.5”x33”x8”

| | |

SEAT DIMENSIONS| SEAT HEIGHT| GRIP DISTANCE| WHEEL DIMENSIONS
---|---|---|---
17”x9”| 23”| 18”| 10”x1.5”

BASKET DIMENSIONS| MAX. LOAD BASKET| MAX. WEIGHT USER| WEIGHT ROLLATOR
---|---|---|---
15”x10.2”x7.5”| 11 lb| 300 lb| 20 lb

MATERIALS

Structure: aluminum. Basket and backrest: polyester + PVC. Wheels: rubber. Handles: PVC.

TIRE PRESSURE

The recommended tire pressure is 30-35 psi.

PRECAUTIONS

WARNINGS

Make sure the walker is completely open and in the correct position before use.
Be careful when folding and unfolding the walker to avoid hurting yourself.
Make sure that the handle is properly adjusted to the correct height. Check the stability of the walker before use.
Test the brake mechanism before use. If the wheels turn while the brakes are locked, refer back to how to adjust the brake pressure. When the brakes are released, the wheels should turn freely.
Use only on even surfaces, never on a slope or uneven terrain. Using the walker in any other way than intended could cause damage or injury.
Do not leave the walker unattended without locking the brakes.
Do not stop or turn on a ramp or slope. Do not make sharp turns. On downhill slopes, apply the brakes to prevent the walker from going faster than you.
Use the basket only to transport objects without exceeding the maximum load: 11 lb.
Do not hang bags from the handles, the walker may tip over.
Do not exceed the maximum user weight: 300 lb.
Do not expose the product to temperatures above 40°C for a prolonged period of time; otherwise the aluminum tubes will heat up and could cause burns.
According to the manufacturer’s recommendations this product is suitable for recycling.
Inspect the walker before each use to ensure that there is no damage or excessive wear.
Before use, check that the walker is secure and stable; and all fastenings and fittings are tight and secure. If you find any signs of wear or damage to your walker, DO NOT USE IT.
Retain these instructions for future reference.
Any serious incident involving the product must be reported to the manufacturer and to the competent authority of the Member State in which the user and patient are established.
Keep your walker clean using a damp cloth. Do not use abrasive cleaning materials. Do not clean or disinfect the walker using steam.

KMINA warrants this walker to be free from defects. The warranty will remain in effect for 3 years from the date of original purchase by the consumer. The warranty does not extend to parts exposed to natural wear and tear that require periodic replacement, such as brakes, wheels, handles and bags.This warranty does not cover:

Replacement parts supplied by anyone other than KMINA or the authorized dealer.
Any failure of the unit during the warranty period that is not caused by a defect in material or workmanship or if the failure is caused by misuse.
KMINA is not responsible for accidental damage or damage to property.

In case of return, properly pack the walker preferably in its original packaging, otherwise KMINA will not be responsible for possible damages caused during shipment.

IMPROVING MOBILITY DEVELOPMENT S.L.