motorola PIP1500 5 Inch WiFi Video Baby Monitor User Guide
- June 4, 2024
- Motorola
Table of Contents
motorola PIP1500 5 Inch WiFi Video Baby Monitor
At a glance Baby (camera) unit
-
Camera
-
Base
-
Speaker
-
Antenna
-
Power jack
-
Power / Linking LED indicator
Lights up in blue when the parent unit is powered on and linked to the baby (camera) unit. -
Pair button
Press and hold to pair with the parent unit.
-
Screen display
-
Dual sound level indications (front and top view)
-
Power button
Press and hold to turn on or off. Press to turn the screen on or off. -
Menu button
Press to open the menu. -
OK / Zoom button
Press to confirm a selection/zoom in or out. -
Navigation button
Adjust menu settings/press left or right to select the parent unit’s volume level. -
Volume / Back button
-
Talk back button
Press and hold to talk to the baby. -
Antenna
-
Speaker
Connect and charge
Baby (camera) unit
- Plug the DC plug of the power adapter into the power socket on the rear of the baby (camera) unit and plug the other end of the AC adapter into the wall socket.
- The baby unit turns on and the power indicator lights up in blue and flashes in red if the parent unit has not been powered up or loss connection with the baby (camera) unit.
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out
of the reach of children (more than 1 meter or 3 feet away). Do not remove the
tags from the AC Adapters. Only use the AC Adapters provided.
Parent unit
A rechargeable battery is already pre-installed inside the parent unit. When fully charged, you can move the parent unit without losing the link and picture from the baby (camera) unit. When charging the battery for the first time, charge for at least 16 hours continuously.
- Plug the DC plug of the power adapter into the power socket on the side of the parent unit and plug the other end of the AC adapter into the wall socket.
- Switch on the AC power and the parent unit will turn on.
- When the parent unit is fully charged, will appear steadily on the screen display.
- Press and hold the power button on the top of the parent unit to turn it on and off.
Note
Use only the supplied power adapter (DC5V / 1500 mA).
Pair the baby (camera) unit to the parent unit
We have paired the baby unit to the parent unit in the pack. In case you want
to pair an extra camera, press and hold on the rear of the baby (camera) unit
for more than 5 seconds.
Wall mount the baby (camera) unit
- Mark the positions of 2 screw holes on the wall. Drill a screw hole at each marking.
- Install the supplied wall anchors into 2 screw holes on the wall.
- Insert the supplied wall mounting screws into the wall anchors.
- Fix and fasten the underside of the baby (camera) unit and the wall mount bracket with the supplied separate screw.
- Hang the wall mount bracket on the wall mounting screws on the wall.
- Adjust the camera manually if necessary.
Note
The pack includes a power adapter with a longer cord which is beneficial for wall mount application, where your wall socket is far from the camera.
Use your video baby monitor
Parent unit main menu
- Zoom in/out
- Adjust LCD brightness
- Play list
- Set the alarm
- Camera selection
- Screen on/off timer
- View multiple cameras
- Message inbox
- Temperature unit °C or °F selection
Status icons
- Signal strength
- Battery level indication
- Zoom in
- Alarm set
- Playing lullaby
- Speaker off
- Talk back
- Night vision
- Screen off time (5/30/60 minutes)
- Screen saver enabled
- Cycle view from camera
- Camera selected
Other menu options
Lullabies playback
- Press MENU on the parent unit to open the menu.
- Scroll the navigation button up and down to select the desired lullaby.
- Press OK on the desired lullaby and the volume status bar pops up.
- Scroll the navigation button up and down to select the desired volume.
For a more detailed explanation of all features and instructions, visit or download the user manual from motorolanursery.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>