AEG DGB2531M Cooker Hood User Manual

August 24, 2024
AEG

AEG DGB2531M Cooker Hood

Product Information

Specifications:

  • Model: DGB2531M
  • Brand: AEG
  • Product Type: Cooker Hood

Product Usage Instructions

Safety Instructions:
Ensure to read and follow all safety instructions provided in the user manual before using the cooker hood.

Functions:
The cooker hood features:

  1. Light Switch: To turn the light on and off.
  2. Fan Speed Switch: To adjust between different fan speed levels.
  3. Indicator: Indicates when cooking with covered pots.

How to Use:
To use the cooker hood:

  1. Turn on the light using the light switch.
  2. Adjust the fan speed using the fan speed switch.
  3. Ensure the indicator is illuminated when cooking with covered pots.

Cleaning Notes:
The grease filters are dishwasher safe for cleaning. Keep the cooker hood clean for optimal performance.

Cleaning the Grease Filter:
To clean the filters:

  1. Press the mounting clip handle on the filter panel under the hood.
  2. Clean the filters with a non-abrasive sponge or in the dishwasher.
  3. Reassemble the filters by following the disassembly steps in reverse order.
  4. Filters should be replaced every four months.

Frequently Asked Questions (FAQ):

Issue: The appliance cannot be turned on.
Solution: Check the power source and ensure all connections are secure. If the issue persists, contact customer support for further assistance.

Welcome to AEG! Thank you for choosing our appliance.
Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support
Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people safety

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children of less than 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Keep all packaging away from children and dispose of it appropriately.
  • Keep children and pets away from the appliance when it operates.
  •  Children shall not carry out cleaning and user maintenance of the appliance without supervision.

General Safety

  • This appliance is intended for domestic use above hobs, cookers and similar cooking devices.
  • This appliance is designed for single household domestic use in an indoor environment.
  • This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
  • Before carrying out any maintenance, disconnect the appliance from the power supply.
  • CAUTION: Accessible parts may become hot during use with cooking appliances.
  • Use only the fixing screws supplied with the appliance if not supplied, use the screws recommended in the installation instructions. Install the appliance in a safe and suitable place that meets installation requirements.
  • WARNING: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.
  • Do not use adhesives to fix the appliance.
  • The minimum distance between the hob surface on which the pans stand and the lower part of the appliance shall be at least 65 cm, unless otherwise specified in the installation instructions for the appliance or hob.
  • The discharge of air must comply with local authorities regulations.
  • Ensure good air ventilation in the room where the appliance is installed to avoid the backflow of gases into the room from appliances burning gas or other fuels, including open fires.
  • Make sure that the ventilation openings are not blocked and the air collected by the appliance is not conveyed into a duct used to exhaust smoke and steam from other appliances (central heating systems, thermosiphons, water-heaters, etc.).
  • When the appliance operates with other appliances the maximum vacuum generated in the room should not exceed 0.04 mbar.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard.
  • If the cord set is damaged, it must be replaced by a special cord set available from the manufacturer or its Authorised Service Centre.
  • If the appliance is connected directly to the power supply, the electrical installation must be equipped with an isolating device that allows to disconnect the appliance from the mains at all poles. Complete disconnection must comply with conditions specified in the overvoltage category III. The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
  • Do not flambé under the appliance.
  • Do not use to exhaust hazardous or explosive materials and vapours.
  • Clean the appliance regularly with a soft cloth to prevent the deterioration of the surface material.
  • Do not use a steam cleaner, water spray, harsh abrasive cleaners or sharp metal scrapers to clean the surface of the appliance. Use only neutral detergents.
  • Clean grease filters regularly (at least every 2 months) and remove grease deposits from the appliance to prevent the risk of fire.
  • Use a cloth to clean the interior of the appliance.

SAFETY INSTRUCTIONS

Installation

WARNING!
Risk of injury, electric shock, fire, burns or damage to the appliance.

  • Only a qualified person must install this appliance.
  • Do not install or use a damaged appliance.
  • Follow the installation instructions supplied with the appliance.
  • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
  • Before installing the appliance remove all the packaging, the labelling and the protective film.
  • Do not install the exhaust air into a wall cavity, unless the cavity is designed for that purpose.

Electrical connection
WARNING!
Risk of fire and electric shock.

  • All electrical connections should be made by a qualified electrician.
  • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
  • If the symbol ( ) is not printed on the rating plate, the appliance must be earthed.
  • Always use a correctly installed shockproof socket.
  • Do not let the electricity mains cable tangle.
  • Do not use multi-plug adapters and extension cables.
  • If the mains socket is loose, do not connect the mains plug.
  • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
  • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
  • Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable can make the terminal become too hot.
  • Connect the appliance at the end of the installation. Make sure that there is access to the mains after the installation.

Use
WARNING!
Risk of injury, burns and electric shock.

  • This appliance is for cooking purpose only. Do not use the appliance for other purpose.
  • Do not change the specification of this appliance.
  • Do not operate the appliance with wet hands or when it has contact with water.
  • Use only the accessories supplied with the appliance.
  • Keep flames or heated objects away from fats and oils during cooking and frying.
  • Do not use uncovered electric grills.
  • Do not use the appliance as a storage surface.
  • Do not use magnifying glasses, binoculars or similar optical devices to look directly at the lighting of the appliance.
  • If the appliance works with other devices, the maximum developed pressure must not exceed 4 Pa (4×10-5 bar).

Service

  • To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
  • Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

Disposal
WARNING!
Risk of injury or suffocation.

  • Contact your municipal authority for information on how to dispose of the appliance.
  • Disconnect the appliance from the mains supply.
  • Cut off the mains electrical cable close to the appliance and dispose of it.

INSTALLATION

WARNING!
Refer to Safety chapters.

Installation instructions
For complete information about the installation of the appliance refer to a separate installation booklet.

PRODUCT DESCRIPTION

Control panel overview

  Function Description
1 Light switch To switch the light on and off.
2 Fan speed switch To switch between fan speed level.
3 Indicator Indicates if the hood operates.

DAILY USE

Using the hood
Check the recommended speed according to the table below.

  1. While heating up food, cooking with covered pots.
  2. While cooking with covered pots on multiple cooking zones or burners, gentle frying.
  3. While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or burners.

It is recommended to leave the hood operating for approximately 15 minutes after cooking.

To operate the hood:
Move the fan speed switch to one of the speed levels. The hood starts to operate. If needed, change the speed by moving the switch.

The hoods light works independently to other hood functions. To illuminate the cooking surface use the light switch .
To turn off the appliance move the fan speed switch to the 0 position.

CARE AND CLEANING

Notes on cleaning

  • Cleaning Agents
    • Do not use abrasive detergents and brushes.
    • Clean the surface of the appliance with a soft cloth with warm water and a mild detergent.
    • After cooking some parts of appliance can get hot.
    • To avoid stains appliance must be cooled down and dried with clean cloth or paper towels.
    • Clean stains with a mild detergent.
  • Keep the hood clean
    • Clean the appliance and grease filters each month.
    • Clean the interior and grease filters carefully from fat. Fat accumulation or other residue may cause fire.
    • Grease filters can be washed in a dishwasher.
    • The dishwasher must be set to a low temperature and a short cycle.
    • The grease filter may discolour, it has no influence on the performance of the appliance.
  • Charcoal filter
    The time of saturation of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter. The activated charcoal filter is not washable, cannot be regenerated and must be replaced approximately every 4/6 months of operation, or more frequently for particularly heavy usage.

Cleaning the grease filter
Filters are mounted with the use of clips and pins on the opposite side.

  • To clean the filter:
1. Press the handle of the mounting clip on the filter panel underneath the hood (1).
2. Slightly tilt the front of the filter downwards (2), then pull. Repeat the first two steps for all filters.
3. Clean the filters using a sponge with non abrasive detergents or in a dishwasher.  

The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, it has no influence on the performance of the appliance.

4. To mount the filters back follow the first two steps in reverse order. Repeat the steps for all filters if applicable.

Replacing the charcoal filter
WARNING!
The charcoal filter is NON-washable! The filter cannot be regenerated!

  • To replace the charcoal filter:
1. Remove the grease filters from the appliance.  

Refer to “Cleaning the grease filter” in this chapter.

2. Turn the filter counterclockwise (1) and then pull (2).  

To mount the filters back follow the steps in reverse order. In any case, it is necessary to replace the filters at least every four months.

Replacing the lamp
This appliance is supplied with a LED lamp and separate control gear (LED driver). These parts can be replaced by a technician only. In case of any malfunction refer to “Service” in the “Safety Instructions” chapter.

TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

What to do if…

Problem Possible cause Remedy
You cannot activate the appliance. The appliance is not connected to a power
supply or it is connected incorrectly. **** Check if the appliance is

correctly connected to the electrical supply.
You cannot activate the appliance.| The fuse is blown.| Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician.
The lamp does not operate.| The lamp is defective.| Replace the lamp. Refer to the “Care and Cleaning” chapter.
The appliance does not absorb enough vapours.| The motor speed is not adequate to the appearing vapours.| Change the speed of the motor.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

aeg.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals