hama 00133900 DayNight Sensor LED Night Light Instruction Manual
- June 6, 2024
- Hama
Table of Contents
hama 00133900 DayNight Sensor LED Night Light
Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Safety instructions
- The product is intended for private, non-commercial use only.
- The product is intended only for use inside buildings.
- Use the product only for the intended purpose.
- Protect the product from dirt, moisture and overheating and use it in dry environments only.
- Do not drop the product and do not expose it to any major shocks.
- As with all electrical products, this device should be kept out of the reach of children.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- Only use the article under moderate climatic conditions.
- Do not operate the product outside the power limits specified in the technical data.
- Do not use the product in areas in which electronic products are not permitted.
- Do not use the product in a damp environment and avoid splashing water.
- The product must only be operated on a supply network as described on the type plate.
Risk of electric shock
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, adapter cable or power cable is damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Warning
- Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
- If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
- If you will not be using the product for a prolonged period, disconnect it from mains power.
Start-up and operation
- Connect the night light to an approved and easily accessible socket.
- The night light is equipped with a day / night sensor which switches it on automatically as soon as the surroundings go dark. Conversely, the night light switches off as soon as it gets light.
Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and / or safety notes.
Care and maintenance
Note
Disconnect the device from the mains before cleaning and during prolonged
periods of non-use.
Technical data
DayNight Sensor
Eingangsspannung/ Frequenz 230V / 50 Hz
Leistungsaufnahme 0,28W
Breite
| ****
X HOhe
| ****
X Tiefe
| ****
60 x 60 x 70 mm
Recycling information
Note on environmental protection:
Following the implementation of European Directive 2012/19/EU and 2006/66/EU
into the national legal systems, the following applies: Electrical and
electronic devices as well as batteries must not be disposed of with –
household waste. Consumers are obliged by law to return electrical and
electronic devices as well as batteries to the designated public collection
points or to the point of sale at the end of their service lives. Detailed
information on this topic is defined in the national laws of the respective
country. This presence of the above symbol on the product, operating
instructions or package indicates that the product is subject to these
regulations. By recycling, reusing the materials or other forms of utilising
old devices/batteries, you are making an important contribution to protecting
our environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>