VEIKOUS HP1001-15PK-1 Outdoor Lighted Snowman Christmas Yard Decorations Instruction Manual
- June 12, 2024
- VEIKOUS
Table of Contents
VEIKOUS HP1001-15PK-1 Outdoor Lighted Snowman Christmas Yard Decorations
Product Information
The 59 Lighted Snowman is a decorative item that adds a festive touch to your outdoor space during the holiday season. It comes with various components that need to be assembled to create the complete snowman figure.
Components:
| Part | Description | Illustration | Qty |
|---|---|---|---|
| A | Hat | 1 | |
| B | Lower Body | 1 | |
| C | Upper Body | 1 | |
| D | Scarf | 1 | |
| E | Arms | 2 | |
| F | Bird | 2 | |
| G | Plastic Ties | ||
| H | Ground Stake |
Product Usage Instructions
- Remove the twisted ties from the folded frame. Note: Some parts are connected by the strings of lights and should not be completely separated.
- Put all the parts on a leveled ground surface and in the right order.
- Insert the prongs on the bottom of the Upper body (C) into the corresponding rings of the Lower body(B). (see Fig.1)
- Insert the prongs on the Arms (E) into the corresponding rings of the Upper body(C). (see Fig.2)
- Insert the prong on the Scarf(D) into the corresponding ring of the Upper body(C). (see Fig.2)
- Insert the prong on the Bird(F) into the corresponding ring of the Arm(E). (see Fig.3)
- Insert the prong on the bottom of the Hat(A) into the corresponding ring of the Upper body(C). (see Fig.3)
- Insert the prong on the Bird(F) into the corresponding ring of the Hat(A). (see Fig.3)
- Secure the installing points with plastic ties(G) to ensure stability.
- Secure the base to soft ground by fully inserting Ground stakes(H) into the ground.
- Plug the light set into a standard 120-volt AC electrical outlet.
Figure 1
Figure 2
Figure 3
www.veikous.com
[email protected]
59″ LIGHTED SNOWMAN
MAKE SURE TO FOLLOW THE STEPS BELOW FOR A SUCCESSFUL & EASY ASSEMBLY
TIP: To ensure the final unit is secure and sturdy it is highly recommended to secure each component with the zip ties provided after connecting each component together in the steps.
TO ASSEMBLE
-
Remove the twisted ties from the folded frame.
NOTE: Some parts are connected by the strings of lights and should not be completely separated. -
Put all the parts on a leveled ground surface and in the right order.
-
Insert the prongs on the bottom of the Upper body (C) into the corresponding rings of the lower body(B). (see Fig.1)
-
Insert the prongs on the Arms (E) into the corresponding rings of the Upper body(C). (seeFig.2)
-
Insert the prong on the Scarf(D) into the corresponding ring of the Upper body(C). (see Fig.2)
-
Insert the prong on the Bird(F) into the corresponding ring of the Arm(E). (see Fig.3)
-
Insert the prong on the bottom of the Hat(A) into the corresponding ring of the Upper body(C). (seeFig.3)
-
Insert the prong on the Bird(F) into the corresponding ring of the Hat(A). (see Fig.3)
-
VERY IMPORTANT: Secure the installing points with plastic ties(G) and secure the basetothesoft ground by fully inserting Ground stakes(H) into the ground.
-
Plug the light set into a standard 120-volt AC electrical outlet.
ENJOY YOUR PRODUCT!
WARNING
Manufacturer and seller expressly disclaim any and all liability for
personal injury, property damage or loss, whether direct, indirect, or
incidental, resulting from the incorrect attachment, Improper use, inadequate
maintenance, or neglect Of this product.