OYPLa 4146 Electric Garden Leaf Blower and Vacuum Mulcher User Manual

OYPLa 4146 Electric Garden Leaf Blower and Vacuum Mulcher

Safety Instructions

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or other queries, please contact our Customer Services.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
• The tool should only be connected to a 240V AC, 50Hz electrical outlet.
• Do not abuse the power cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, and sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Always wear eye and ear protection. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
• Prevent unintentional starting. Ensure the switch is in the off position before connecting to a power source, picking up, or carrying the tool.
• Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
• Power tools are dangerous in the hands of untrained users.
• Never blow debris in the direction of bystanders or solid objects. The force of the air can cause objects to be blown or ricochet, which can harm people. Never place objects inside the blower tubes.
• Never operate with any air intakes blocked. Keep air intakes free of dust, lint, hair, and anything that may reduce airflow. Do not plug anything into the openings or blower tubes.
• Never use this tool for spreading chemicals, fertilizer, or any other substance that may contain toxic materials. Do not use this tool as a sprayer of flammable liquids.
• Disconnect from the electrical supply before opening the inlet cover or installing blower tubes. Never operate this tool without the inlet cover secured or blower tubes in place.
• Always inspect the area before using the tool to remove debris and hard or sharp objects that can be blown or cause damage during operation.
• Always work away from solid objects such as walls, large stones, automobiles, and fences.
• Clean spaces with corners by starting in corners and moving outward to straight areas to prevent an accumulation of debris that could fly into the face.
• Do not discard any of the packagings until you have checked that you have all of the parts and fitting required.
• If the product is damaged or has any defects, please contact cservice@oypla.com

Operating Instructions

Product Details

1. Cord Guard
2. Main Handle
3. On/Off Switch
4. Additional Handle
5. Blower Tube
6. Motor Housing
7. Function Switch
8. Collection Bag
9. Wheel
10. Shoulder Harness

Assembly Instructions

1. Slide the upper tube into the motor housing, then tighten the screws and make sure that the tube is fixed firmly in place.
2. Insert the lower tube into the upper tube and push them together until they are firmly connected, then tighten the screws.
3. Attach the wheels to the lower tube as shown.
4. Attach the collection bag to the hook on the upper tube and the outlet on the bottom of the motor housing.

Operating Instructions

Before starting the machine, make sure that the collection bag is fitted and the shoulder harness is adjusted to a suitable working position.
Switching On and Off
To switch on, hold the handle and press the switch as shown. To turn it off, release the switch.

Blowing Mode

• Turn the function switch anti-clockwise to the position of blow mode.
• Turn the power switch on and point the jet of air in front of you. Move forward slowly to gather together leaves or to move leaves from inaccessible areas

Vacuum Mode

• Turn the function switch clockwise to the position of vacuum mode.
• Hold the blower several centimeters over the leaves which you are going to suck up. Switch the machine on.
• Tilt the suction tube slightly and use a sweeping action to collect leaves with approximately 50cm distance between the opening of the suction tube and the ground.
• The leaves will be sucked up into the tube, chopped up and stored in the collection bag.
• When the collection bag is full, the vacuum power will be greatly reduced. When this happens, turn the machine off and disconnect the plug from the power supply.
• Wait until the suction fan has stopped completely before emptying the bag.
• Open the zip fastener inside the bag and empty it completely. If you have collected only leaves and vegetable matter, they will already have been shredded and will be ready for composting.
• Zip up the bag and resume work.

Before re-fitting the collection bag, clean the inside of the exhaust opening, removing any shredded deposits. Pay special attention to the cleaning of the supporting edges of the air flow deviator on the inside of the tube.

Care and Maintenance

• Turn the machine off and unplug from the power supply before servicing, cleaning or maintenance is performed.
• Keep the air intake clean and air vents free of debris to avoid overheating the motor.
• Only clean the outer casing of the machine with a damp cloth and mild detergent; do not use cleaning agents. Water must never come into contact with the machine.
• If the blower vibrates abnormally, stop the motor immediately. Abnormal vibration usually indicates a mechanical problem and continued operation could lead to damage or injury.
• No lubrication is necessary as the motor is equipped with lifetime-lubricated bearings.

Specifications

Rated Voltage: 240V AC, 50Hz
Power: 2600W
No Load Speed: 15000rpm
Blower Velocity: 250km/h
Maximum Blower Air Output: 10.7m3/min
Collection Bag Capacity: 40L
Sound Pressure LPA: 87.4dB(A) Sound Pressure LWA: 98.07dB(A)
Vibration ah: 1.66m/s2

Disposal of Unit

Products bearing the symbol shown above mean that used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery, and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>