GEONFINO G5 Entry Door Lock with Electronic Keypad Instruction Manual

GEONFINO G5 Entry Door Lock with Electronic Keypad Instruction Manual

Lock adding

• Turn on Bluetooth and enter the interface of adding lock in app.

• Light up the screen and add the lock
  

Note: Please keep your phone near the door lock within 10 meters.

Key management

After the administrator successfully adds the lock, owner owns the highest administrative rights to the lock. owner can send keys to others. Meanwhile owner can increase the key management that is about to expire.

Click the type of lock it will show the time-limited ekey,one-time ekey and permanent ekey. Time-limited ekey:The ekey is valid for the specified time. Permanent ekey: The ekey can be used permanently. One-time ekey: The ekey will be automatically deleted once it has been used.

The manager can delete ekey, reset ekey, send and adjust the ekey, meanwhile he can search the lock record.

Passcode management

After inputting the passcode on the keyboard of the lock,press the unlock button to unlock. Passcodes are classified into permanent, time-limited, one- time, empty, oop, custom, etc.

• Permanent passcode
  The permanent passcode must be used within 24hours after it is generated, otherwise it will automatically expire.
  

• Time-limited passcode
  The time-limited passcode can own an expiration date, which is a minimum of one hour and a maximum of three years. If the validity period is within one year, the time can be accurate to the hour; if the validity period is more than one year, the accuracy is month when the time-limited passcode is valid, it should be used within 24 hours, otherwise it will automatically expire.
  

• One-time passcode
  One-time passcode can only be used for onetime, and which is available for 6 hours. It will automatically expire.

• Clear code
  Clear code is used to delete all the passcodes the lock has set, and which is available for 24 hours.
  

• Cyclic passcode
  The cyclic password can be reused within a specified time period, including daily type, weekday type, weekend type, and more.
  

• Custom passcode
  User can set any passcodes and validity period he wants.
  

• Passcode sharing
  The system add new communication ways of Facebook Messenger and Whatsapp to help users share the passcode.
  

• Passcode management
  All generated passcodes can be viewed and managed in the password management module. This includes the right of changing the password, deleting the password, resetting the password, and unlocking the password.
  

Card management

You need to add the RFID card first. The whole process needs to be done via the app beside the lock. The validity period of the IC card can be set, either permanent or time-limited.

All RFID cards can be queried and managed through the RFID card management module. The remote card issuance function is displayed in the case of a gateway. If there is no gateway, the item is hidden.

Records

It records who comes and goes, and when for 24/7 access logs, get all records about the door unlock/ lock anytime and anywhere.

Setting

In the system settings, it includes touch unlock switch, group management, gateway management, security settings, reminder, transfer smart lock and so on.

User management

The user name and phone number can be seen in the user list. Click the customer you want to view to get the door lock information.

Key groups management
In the case of a large number of keys, you can use group management module.

Transfer admin rights
The administrator can transfer the lock to other users or to the apartment(Room Master user).Only the account that manages the lock has the right to transfer the lock. After inputting the account, you will receive a verification code. Filling in the correct number, you will transfer successfully.

The account of the apartment transfer receive must be the administrator account.

Lock recycling station
If the lock is damaged and cannot be deleted, the lock can be deleted by moving it into the recycling station.

Low Power

When the smart lock is opening, the screen will brighten up and “beep” to warn that the battery is low power.

Factory Default Setting

Restore Factory Settings

Restore on App

Restore on lock

1. Press and hold the Reset button
2. Keep holding the Reset button for 6 seconds, until your hear the sound of beep.
   
   Note: This Operation IC Wired and battery need to be installed. this button is behind the keypad panel.

Troubleshooting

• The turnpiece cannot rotate or operate the lock.
  Remove and re-install the lock, making sure that the turnpiece is in right position.

• The lock cannot be locked or unlocked by the keypad.
  Make sure that the codes are not disabled. If needed, restore the lock’s default settings.

• The keypad doesn’t respond when touched ( no lights are visible and no beeping is heard) .
  Make sure the cables are properly connected, and make sure the batteries are new and installed correctly.

• I forgot my Master Codes.
  Perform a reset in order to erase all passcodes. Once the reset is complete, all passcodes will be erased and the Master code will return to the default value ( 123456) .

• The lock cannot connect APP via bluetooth
  Please make sure the bluetooth is on. The APP is ready to search the lock. If needed, restore the lock’s default setting.

• Multiple attempts unlock the door also failed to open
  Use the key to open the lock and change the battery. If needed, please contact customer service.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Dear customer,
Greetings! Thank you very much for your purchasing! We are so honored to have you as our customer, and we have great confidence to provide you with premium products and friendly service.

About GEONFINO

As an innovative and high technology corporation, GEONFINO is dedicated to R&D,designing,producing and marketing of Smart lock products. Our top-guns in the Smart lock field have constantly developed a series of products with features like fashion, human care, energy efficiency, and environment protection. And we highly value concepts of “People Oriented, Practical and Innovative.” a professional seller in the smart lock field will always be a nice company to your life!

Warranty

GEONFINO not only provides a 1-year warranty for all our products but also offers high-level after-sales service.Please kindly contact us immediately and we will supply a replacement or refund if you encounter any of the followings:

1. Receving defective items;
2. Short packaging;
3. Parts are broken in transit;
4. Item stops working within warranty;
5. Wrong order.

Importance

Valuable customers, if you like our products and service, your positive feedback and reviews will be inspiring comments on our work. If you’re dissatisfied with what you get, before writing negative feedback, please contact us, we will try our best to solve the issue to your satisfaction. Thanks for your vote of confidence again! Wish you a very happy life!
Best regards!

Customer Service

E-mail: support@geonfmos.com
Scan here to contact us [24Hrs Online]

https://geonfino.afterservice.vip

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>