GEONFINO S2PRO Smart Lock User Manual
- June 9, 2024
- GEONFINO
Table of Contents
S2PRO Smart Lock
User Manual
Lock adding
a. Turn on the Bluetooth and enter the interface of adding lock in
app.
b. Light up the screen and add the lock
Note : Please keep your phone near the door lock within 10
meters.
Key management
After the administrator successfully adds the lock, owner owns the highest administrative rights to the lock. The owner can send keys to the others. Meanwhile, the owner can increase the key management that is about to expire. Click the type of lock and it will show the time-limited ekey, one-time ekey and permanent ekey. Time-limited ekey: The ekey is valid for the specified time. Permanent ekey: The ekey can be used permanently. One-time ekey: The ekey will be automatically deleted once it has been used.
The manager can delete an ekey, reset an ekey, and adjust the ekey. He can also check the lock record.
Passcode management
After inputting the passcode on the keyboard of the lock, press the unlock button to unlock. Passcodes are classified into permanent, time-limited, one- time, empty, oop, custom, etc. The password that has been set can only be unlocked, but cannot be locked.
a.Permanent passcode
The permanent passcode must be used within 24hours after it is generated,
otherwise it will automatically expire. b. Time-limited passcode
The time-limited passcode has an expiration date, which is a minimum of one
hour and a maximum of three years. If the validity period is within one year,
the time can be accurate to the hour; if the validity period is more than one
year, the accuracy is month when the time-limited passcode is valid, it should
be used within 24 hours, otherwise it will automatically expire.
c. One-time passcode
One-time passcode can only be used for one time, and is available for 6 hours.
It will automatically expire.
d. Erase passcode
Erase Passcode is VALID for 24 Hours from the current time. Caution -All
passcodes used on this lock will be deleted on using this passcode.
c. Custom passcode
You can configure your own passcode. It needs to be between 6- 9 digits in
length. You can configure the customized passcode via Bluetooth or remotely
via a gateway.
f. Recurring
passcode
The recurring password can be reused within a specified time period,
including daily type, weekday type, weekend type, and more.
g. Passcode sharing
The system adds new ways of communication, such as Facebook Messenger and
WhatsApp, with the aim of helping users to share the access code.
h. Passcode management
All generated passcodes can be viewed and managed in the password management
module. This includes the right to change password, clear password, reset
password and unlock password.
Card management
You need to add the RFID card first.
The whole process needs to be done via the app beside the lock. The validity
period of the IC card can be set, either permanent or time-limited. All RFID
cards can be queried and managed through the RFID card management module. The
remote card issuance function is displayed in the case of a gateway. If there
is no gateway, the item is hidden.
a. Add RFID card
Click ” Cards” , then click “Add card”.
There are three options for you. Select “permanent”, “timed” or
“recycling” as needed. Enter the name of the RFID card, and click “OK” . Then,
when the RFID card is close t o the card sensing area of the lock for 2-3
seconds, the RFID card can be added successfully.
To add an RFID card again, click on the upper right corner of
the “Cards” homepage, click “Add Card”. Then repeat the operation of adding
the RFID card.
b. Delete RFID
cards
Click on the upper right corner of the “Cards” homepage and click “Clear Card”
to delete all RFID cards.
We canals o choose a single RFID card to delete.
Fingerprint management
Fingerprint management is similar to IC card management.
After adding a fingerprint, you can use the fingerprint to unlock the door.
a. Add fingerprint
Click “Fingerprint”, then click “Add Fingerprint”.There are three options for you. Select “permanent”, “timed” or
“recycling” as needed. Enter t h e name of the Fingerprint, and click “OK” .
Then click “Start” and you will be required to place and remove your finger
from the sensor 4 times.
Records
It records who comes and goes. When it comes to 24/7 access logs, get all logs
about door unlock/lock anytime anywhere.
Setting
In the system settings, it includes touch unlock switch, group management,
gateway management, security settings, reminder, transfer smart lock and so
on.
a.User management
The user name and phone number can be seen in the user list.
Click the customer you want to view to get the door lock
information.
b. Key groups management
In the case of a large number of keys, you can use the group management
module.
c. Transfer admin rights
The administrator can transfer the lock to other users or to the apartment
(Room Masteruser) . Only the account that manages the lock has the right to
transfer the lock.
After inputting the account, you will receive a verification code. Filling in
the correct number, you will transfer successfully.
The apartment transfer account received must be the account of the
administrator.
d. Lock recycling station
I f the l o c k is damaged and cannot be deleted, the lock can be deleted by
moving it i n t o the recycling station.
Gateway Management
(Gateway needs t o be purchased separately.)
The smart lock connects directly via bluetooth, soitis attacked by the
network. The gateway is a bridge between smart locks and home Wi-Fi networks.
Through the gateway, user can remotely view and calibrate the lock clock, read
the unlock record, meanwhile, can remotely delete and modify the
password.
Gateways must be
added through the app before they canbe used. Here are the steps:
- Open the TTLOCK app;
- Touch t h e “ ” icon on the top l e f t of the screen;
- Select [Gateway];
- Select the”G2″;
- Plug i n the Gateway and power it on;
- While the light is flashing alternately i n red and blue, press ” + ” sign;
- Add Gateway;
- Select the network and input your WiFi password.
Notice : If the a b o v e process times out, please power off and try again.
Low Power
When the smart lock is open, the screen will brighten up and “beep” to warn that the battery is low power.
Emergency Power
I f the lock is low power and unable to operate , there is a micro USB power socket a t the bottom of lock for power supply.
Factory Default Setting
| Settings | Factory Default |
|---|---|
| Master Code | 123456 |
| Auto Lock | |
| Silent Mode | |
| Wrong Code Entry Limit | |
| Shutdown Time |
Restore Factory Settings
Restore on app
Troubleshooting
I forgot my Master Codes.
Perform a reset in order to erase all passcodes. Once the reset is complete,
all passcodes will be erased and the Master code will return to the default
value (123456).
FCC Warning
This device complies with part 1 5 of the FCC Rules. I t s operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE : This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference ina residential installation. This device generates, uses and can
radiate radio frequency energy and, i f not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The Grantee is not responsible for any changes or modifications not expressly
ap p r o v e d by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.This
equipment complies with FCC’s RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna(s) must not be co-
located or conjunction with any other antenna or transmitter.
Dear customer,
Greetings!
Thank you very much for your purchasing! We are so honored to have you as our
customer, and we have great confidence to provide you with premium products
and f rien dly service.
About GEONFINO
As an innovatve and high high-tech, GEONFINO is dedicated to R&D, designing, producing and marketing of Smart lock products. Our top-guns in the Smart lock field have constantly developed a s e r i e s of products with features l i k e fashion, human care, energy efficiency, and environment protection. And we highly value concepts of “People Oriented, Practical and Innovative.” a professional seller in the smart lock field will always be a nice company to your life!
Warranty
GEONFINO not only provides a 1-year warranty for all our products but also offers high-level after-sales service. Please kindly contact us immediately and we will supply a replacement or refund if you encounter any of the followings:
- Receiving defective items;
- Lacking of packaging;
- Parts are broken in transit;
- Item stops working within warranty;
- Wrong order.
Importance
Valuable customers, if you like our products and service, your positive
feedback and reviews will be inspiring comments on our work. If you’re
dissatisfied with what you get, before writing negative feedback, please
contact us, we will try our best to solve the issue to your satisfaction.
Thanks for your vote of confidence! Wish you a very happy life!
Best regards!
Customer Service
E-mail: [email protected]
TEL: +1 833 637 2188
Scan here to contact us
[24Hrs Online] 
https://geonfino.afterservice.vip