GEONFINO A015 Keyless Entry Door Lock Smart Deadbolt Lock Instruction Manual

GEONFINO A015 Keyless Entry Door Lock Smart Deadbolt Lock Instruction

Manual

Installation Instruction

Parts List

1. Prepare the door and check dimensions

2. Install the latch and strike

Install the latch

Install strike on the door frame

3. Install the keypad

4. Install Mounting Plate

5. Confirm the direction of the door

6. Install Interior Assembly

7. Install Battery Cover

TTLCOK APP add lock

Download APP “TTLock”

Android Mobile Phone–Please earch “TTLock” from Google Play.
Apple Mobile Phone–Please search “TTLock” from App Store.

Register a new account

Turn on Bluetooth and enter the interface of adding lock in app.

Light up the screen and add the lock

Note: Please keep your phone near the door lock within 10 meters.
After adding the lock, the initial password: 123456 will become invalid.

Note: Please keep your phone near the door lock within 10 meters.

Unlock with app

Click “ ” to unlock the door from outside or inside.
Note: Please keep your phone near the door lock within 32.8ft(10m).

How to use

Information & Safety Warnings

• Protect your User Codes and Master Code.
• Protect your key. It is suggested to keep it outside the door, such as your car.
• Restrict access to your lock’s interior assembly and routinely check your settings to ensure they have not been altered without your knowledge.
• This locket is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long-lasting finish. When cleaning is required use a soft, damp cloth. Using lacquer thinner, caustic soaps, abrasive cleaners or polishes could damage the coating and result in tarnishing.

IMPORTANT: Do not load batteries until the lock is completely installed.

Auto Lock

Automatically locks the deadbolt after unlocking. This feature is off by default. You can set the auto lock time in the app.

Master Code

Required for programming and feature settings. The master code can be used to unlock the door in vacation mode.
The default master code needs to be changed before programming. Property owner/manager should keep this information confidential.

1. Master Code (6 to 8) digits: The default Master Code is 123456. It is required that you change it to a code of your own before programming.
2. User Code (6 to 8) digits: A total of 200 User Codes may be programmed.

Wrong Entry Limit

After 5 unsuccessful attempts at entering a valid PIN code, the unit will shut down for 5 minutes.

Unlock with Fake Code

User can prevent PIN code exposure from strangers by entering random digits before or after PIN code.

Auto Re-lock Mode

Auto Re-lock Mode can be set up in APP.(5s,10s,15s,30s, 60s,Custom) When the lock is unlocked via APP, passcode or RFID card, it will re-lock automatically in the reset time.

Low Power

Emergency Power

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>