GEONFINO G5 Pro Smart Lock Instruction Manual

GEONFINO G5 Pro Smart Lock Instruction

Installation Video

Installation Guide

What is inside

1.  Prepare the door and check dimensions

   • Measure to confirm that the backset is either 2-3/8″ or 2-3/4″ (60 or 70 mm). 
   • Measure to confirm that the hole in the door edge is 1 “(25mm).And measure to confirm that the door is 1 – 3/5” to 2″(40 mm to 50 mm)thick.

2. Install the latch and strike

   • Hold the latch in front of the door hole, with the latch face flush against the door edge. 
   • Is the slotted hole centered in the door hole?
   • Rotate the head oflatch 180°
   • Use a screwdirver to test if deadbolt works smoothy. When the screwdirver turn, the deadbolt would be lock/unlock.
   • Install strike on the door frame.
     

3. Installation instructions

   • Install Keypad
     If the hole is bigger than 2 l/8″(54mm),install the keypad direct!

   • Please ensure the tail bar is Horizontal Lt. during installation. The IC wired need to under the deadbolt.

   • Please ensure the tail bar is Horizontal Lt. during installation. The IC wired need to under the deadbolt.

   • Install Mounting Plate

   • Put the mounting plate on the waterproof rubber pad

   • The IC wired and tail bar go through the hole of mounting plate

   • Secure the mounting plate with the supplied screws.

   • Make sure the IC wired not too long.

4. Confirm the direction of the door

5. Install Interior Assembly

   • Connect the cable and ensure tight cable connection. And the tail bar insert the turnpiece hole.
   • Install the interior assembly on mounting plate and make sure they click on together
   • Secure the interior assembly with the supplied screws.
   • Load 4 AA batteries into the interior assembly.
   • IMPORTANT: For best results, use new, non-rechargeable Alkaline batteries only.

6. Install Battery Cover

   • Install battery cover
   • Secure the interior assembly with the supplied screws.

How to Use

UNLOCK the door from outside

ViaAPP
Long press 110 11 to LOCK the door from outside or inside. Click 11011 to UNLOCK the door from outside or inside.
Note: Please keep your phone near thedoor lock within 32.8ft(10m).

Programming Instructions

Information & Safety Warnings

• Protect your User Codes and Master Code.
• Protect your key. It is suggested to put it outside the door, such as your car.
• Restrict access to your lock’s interior assembly and routinely check your settings to ensure they have not been altered without your knowledge.
• This lockset is designed to provide the highest standard of product quality and performance. Care should be taken to ensure a long-lasting finish. When cleaning is required use a soft, damp cloth. Using lacquer thinner, caustic soaps, abrasive cleaners or polishes could damage the coating and result in tarnishing .
  IMPORTANT : Do not load batteries until lock is completely installed.

Definitions
Master Code
Required for programming and feature settings. Master code can be used to unlock the door under vacation mode. The default master code needs to be changed before programming. Property owner/manager should keep this information confidential.

1. Master Code(6 to 8)digits:The default Master Code is 123456. It is required that you change it to a code of your own before programming.
2. User Code(6 to 8)digits:A total of200 User Codes may be programmed.

Auto Lock
Automatically locks the deadbolt after unlocking. This feature is off by default. You can set the auto lock time in the app.

Wrong Entry Limit
After 5 unsuccessful attempts at entering a valid PIN code, the unit will shut down for 5 minutes.

Unlock with Fake Code
User can prevent PIN code exposure from strangers by entering random digits before or after PIN code.

APP Guide

1. Download APP “TTLock”

   • Android Mobile Phone–Search “TTLock” from Google Play.
   • App le Mobile Phone–Please search “TTLock” from App Store.

2. Register a new account(phone number or email)

3. Lock adding

4. II Turn on Bluetooth and enter the interface of adding lock in app .

5. II Light up the screen and add the lock
   Note: Please keep your phone near the door lock within 10 meters.

6. Key management
   After the administrator successfully adds the lock, owner owns the highest administrative rights to the lock. owner can send keys to others. Meanwhile owner can increase the key management that is about to expire. Click the type of lock it will show the time-limited ekey,one­time ekey and permanent ekey. Time-limited ekey:The ekey is valid for the specified time. Permanent ekey: The ekey can be used permanently.
   One-time ekey: The ekey will be automatically deleted once it has been used.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>