HEAD WATCHES H160501 Seoul Smartwatch User Manual
- June 6, 2024
- HEAD WATCHES
Table of Contents
SMARTWATCH
USER MANUAL
Seoul
Version 05.2021
FIRST STEPS
Press the Touch Key for some seconds to start your watch. If you want to
switch off your watch, enter the Tool menu, choose ”Power off“ and also press
the Touch Key for a few seconds to confirm the shutdown.
Charging Instructions
You may have to charge the watch at the beginning if the battery is empty.
Please notice the ”charging “ icon on the back of the watch and remove the
strap. Use the USB plug to charge the smartwatch. It supports a computer USB
or mobile phone 5V standard charger, and it can be fully charged in about two
hours.
Please make sure that the USB port is attached correctly. The two contacts of
charging cannot contact the conductor at the same time, or it may cause the
burning of the circuit.
Download HEAD Watches App
Go to www.headwatches.com/app on your smartphone and download the app.
Alternatively, you can also scan this QR code with your smartphone or search
for ”HEAD WATCHES“ in Apple App Store oder Google Play Store.
NAVIGATION
Navigate through your smartwatch
Use the Touch Key to access the different areas of the watch.
- Short clicking will take you through the different areas. By continuing to click through the selection, you will go back to Start Screen.
- If you want to select a specific area or exercise, press and hold the Touch Key for a few seconds.
- Within the selected mode you continue moving with a short click.
- Each area has a return arrow. To go back to the selection
press and hold the Touch Key for two seconds.
SETTINGS MENU
Control Center
Click shortly through the menu to open the last area ”Tool“ to enter the
settings menu interface:
- The first icon turns the vibration on and off. With each click, a vibration is triggered. Press and hold the Touch Key to switch on/off.
- With the second icon ”Restore“, the watch can be reset to factory settings. Long press to select whether to restore the factory settings. All data in the bracelet will be cleared after recovery.
- The third icon ”Power off“ can turn off the watch. Press and hold the Touch Key to confirm the shutdown.
- The fourth icon ”Version information“ shows the Bluetooth name and address and the version number of the bracelet.
You can also make some settings directly in the app.
WATCH FUNCTIONS
Temperature
Hold your wrist for 5 minutes after wearing the bracelet for the first time;
the skin temperature and body temperature can be detected.
Data (Steps, Distance and Calories )
The fitness data is turned on by default. Swipe the watch to the right to
enter the fitness data interface, and slide it down to display the current
steps, distance, and calories of the
watch. The data is cleared at 12 o‘clock in the morning every day.
Heart Rate (Bpm)
Put the smartwatch on your wrist (left/right) correctly. Click shortly through
the menu to open the area ”Detection“ to enter the heart rate menu and measure
the heart rate value continuously. After the bracelet is bound to the app, the
heart rate data is synchronized to the app in real-time.
Blood Pressure (mmHg)
Put the smartwatch on your wrist correctly. Click shortly through the menu to
open the area ”Detection“ to enter the blood pressure menu to measure a single
blood pressure value. After the bracelet is bound to the app, the blood
pressure data is synchronized to the app in real-time.
Sleep Monitor
Click shortly through the menu to open the area ”Detection“ to enter the Sleep
monitoring menu. Sleep monitoring time period: 21:00 in the evening to 09:00
the next day. After the watch generates data and exits sleep monitoring, the
sleep data on the watch can be synchronized to the app for viewing after
connecting to the app.
Heart Rate Variation (HRV)
Make sure that you wear the watch properly on your wrist during the ECG test.
After the function is turned on, touch the screen position with your finger to
start the measurement. The test will end after 60s.
Sport Mode
Select the corresponding sport mode (walking, running, hiking, cycling, indoor
running, basketball, football) and press and hold the Touch Key to start the
corresponding exercise mode; long press to exit the sports mode. Press to
return to sports mode to continue. Press to exit the sports mode and save the
data. Press to exit the sports mode and not save the data.
Connect via Bluetooth
Not connected:
After the smartwatch is turned on, the Bluetooth is always in the searched
state. After opening the app go to Device „Add Device“ and click Start Search,
select and click the watch device name to successfully bind the watch to the
app.
Connected :
Watch time synchronization: The watch is successfully connected to the app.
Click to synchronize the time between the watch and the mobile phone.
APP FUNCTIONS
Data Synchronization
Connect the watch successfully to the app to synchronize the watch data.
Dial Standby
Open: Wear the watch correctly on your wrist. When you lift your wrist to look
at the watch, the watch will automatically brighten the screen.
Close: Wear the watch correctly on your wrist.
Do Not Disturb Mode
Enter Device > More in the app, set the start to end time, e.g.: 12:00 to
14:00. During this time there will be no phone calls and message sound
reminders on your watch.
Daily Alarm Clock
New alarm: Enter Device > More in the app, set the start to end time. Set the
alarm only once or repeatedly select the date setting (week) and turn the
alarm on/off.
Delete an alarm: Select and hold a set alarm and swipe to the right to delete
the set alarm.
Movement Reminder
Set the start to end time period and the sedentary time interval (minutes) in
the app, click to enter the repeat setting only once or select the sedentary
reminder date (week).
When the sedentary time is reached, the watch will vibrate and there will be a
sedentary icon.
Drink Water Reminder
Set the start to end time period and frequency (minutes) in the app, click to
enter the repeat setting, select the drinking reminder date (week), check the
drinking reminder and save it. When the reminder time for drinking water
arrives, the watch will vibrate and there will be a drink icon.
Dial Design
Choose an existing watch face: Connect to the app and select a new dial design
in the app to replace the old one. Confirm the dial by clicking the Touch Key
on the watch. After the dial is synchronized, the watch will automatically
display the new dial
Firmware Version
Connect to the app, go to Device > Firmware Upgrade to see the version of the
watch. Users can choose to upgrade the firmware version.
Unbind your Smartwatch
Connect to the app, go to Device to unbind the watch. Click OK to unbind. The
IOS system needs to go to the phone settings to ignore the Bluetooth device.
FAQ AND TIPS
Frequently asked questions and answers
Please avoid exposing the device to extreme temperatures that are too cold or
too hot for a long time, which may cause permanent damage.
Water Resistants
Your smartwatch is IP68 waterproof, which means your watch is not 100%
waterproof and only protected against splashes of water and sweat. You
shouldn‘t swim, bathe, or
shower with the watch. You should also avoid washing your hands with the
smartwatch.
Why can‘t I take a hot bath with my watch?
The temperature of the bathwater is relatively high, and a lot of water vapor
is produced. The water vapor is in the gas phase and its molecular radius is
small, so it can easily
penetrate through the gap of the smartwatch case. When the temperature drops,
it turns back into liquid water droplets, which can easily short-circuit the
smartwatch‘s internal
circuit and damage the smartwatch‘s circuit board.
No power on, no charging
If you receive a Smartwatch that does not turn on, it may be that there was a
collision when transporting the Smartwatch and the Seiko battery was
protected.
If the battery is too weak or the Smartwatch does not turn on after a long
time without using the Smartwatch, please connect the charger and charge it
for more than half an hour to activate it.
User help
You can find more help in the app.
Go to Profile > About > Help
NOTE
Please note that your smartwatch doesn’t replace the position of your doctor,
you mustn’t take any health decision based on data from a smartwatch. Always
seek the final and
superior advice of your doctor.
WARRANTY
Warranty description
When this product is in normal use and there are problems with the product
quality caused by manufacturing, materials, design, etc. Starting from the
date of purchase, the motherboard is guaranteed for free within one year, and
the battery and charger are guaranteed for half a year. No free warranty is
provided for failures caused by the user‘s personal reasons, as follows
- Failure caused by unauthorized disassembly or modification of the watch.
- Failure caused by accidental falls during use.
- All third-party defects and abuses caused by people (such as water in the case, cracks caused by an external force, scratches, damage to peripheral components, etc.) are not covered by the warranty.
- When requesting a free warranty, please provide a warranty card with the date of purchase and the stamp of the place purchase
- When the user repairs the product, please take the product to our company or our company‘s dealership.
- All functions of the product are based on physical objects.
LICENSE
HEAD is a registered trademark of HEAD Technology GmbH and HEAD Sport GmbH and is used under the license by ELYSEE GROUP.
ELYSEE GROUP
Heerdter Lohweg 212
40549 Duesseldorf
Germany
head@elysee-watches.com
www.elyseegroup.de
References
- Watches | Cool Watches | Watches.com
- ELYSEE GROUP · Düsseldorf – Die ELYSEE GROUP ist Ihr kompetenter Partner für den Uhren- und Schmuckbereich, mit Verkaufsstarke Marken: Maserati, Ingersoll, Karl Lagerfeld, DKNY uvm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>