INVENTUM VST412BA Pedestal Fan Instruction Manual
- June 6, 2024
- INVENTUM
Table of Contents
INVENTUM VST412BA Pedestal Fan
Safety instructions
-
Carefully and fully read the user manual prior to using the appliance and carefully store the manual for future reference.
-
Only use this appliance for the purposes described in the instruction.
-
Caution: never insert fingers or objects into the ventilation grid when the appliance is switched on.
-
Only connect the appliance to alternate current, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
-
Never bend the power cord sharply or allow it to run across hot parts.
-
Fully unwind the cord to prevent it from overheating.
-
Never place the appliance near appliances that give off heat, such as ovens, gas cookers, hotplates, etc. Keep the appliance away from walls or other objects that could catch flame, such as curtains, towels (cotton or paper, etc.).
-
Always make sure the appliance is placed on an even, flat surface.
-
Only use the appliance indoors.
-
Do not leave the appliance unsupervised if the appliance is operational.
-
If you want to move the appliance, make sure the appliance is switched off.
-
Do not use the appliance if the plug, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. If this is the case, consult the shop or our technical service.
-
If the cord of the appliance is damaged, it should be replaced by the manufacturer, his customer service or a similarly qualified person in order to prevent hazardous situations.
-
Never replace the plug or cord yourself. Repairs to electrical appliances should only be performed by skilled persons. Incorrect repairs could cause considerable hazards for the user.
-
Never use the appliance with parts that are not recommended or supplied by the manufacturer.
-
Do not pull the cord and/or appliance to remove the plug from the wall socket. Never touch the appliance with wet or moist hands.
-
Never connect the appliance to an external timer or a separate remote control system, in order to prevent hazardous situations.
-
Keep the appliance out of reach of children. Children do not see the 10 dangers when handling electrical appliances. Therefore, never allow children to work with electrical appliances without supervision. Keep the appliance and cord out of reach of children younger than 8 years of age.
-
The appliance can be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or
lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved. -
Children are not allowed to play with the appliance.
-
The appliance may not be cleaned or maintained by children, unless this is done under supervision.
-
If the appliance is not being used or is being cleaned, fully switch off the appliance by removing the plug from the socket.
-
Extension cords may only be used if the mains voltage (see the information plate) and capacity are identical to or higher than that of the appliance. Always use an approved extension cord.
-
If you decide not to use the appliance any more due to a defect, we recommend cutting off the cord after removing the plug from the wall socket. Take the appliance to the waste processing department concerned of your municipality.
-
Never submerge the appliance, cord or plug in water.
-
This appliance is intended for household and similar use, such as:
– in staff kitchens, shops, offices and other work environments;
– by guests of hotels, motels and other residential environments;
– in Bed&Breakfast type environments;
– farms. -
If the appliance is not used as intended, no compensation can be claimed in case of defects or accidents and the warranty will be invalidated.
-
If you decide not to use the appliance any more due to a defect, we recommend cutting off the cord after removing the plug from the wall socket. Small household appliances do not belong in the dustbin. Take the appliance to the waste processing department concerned of your municipality.
Assembly instructions
Before using the fan for the first time, please proceed as follows: carefully
unpack the appliance and all components and remove all packaging material and
any promotional stickers. Keep the packaging (plastic bags and cardboard) out
of the reach of children. After unpacking the appliance, check it for external
damage that may have occurred during transport.
Assemble the fan in accordance with the instructions.
In order to make the assembly process more easy, we recommend removing
components [ a ] and [ b ] before you start.
- Start by placing the footplate at the pedestal. Align the pedestal with the groove on the footplate and attach them to one another with the hook bolt [ b ] .
- Place the motor section on the pedestal and fasten it with screw [ a ].
- Unscrew the lock ring from the ax and place the rear protective guard on the fan.
- Fasten it by tightening the lock ring.
- Insert the fan blade onto the fan. Test the fan blade by rotating it by hand. During rotation, the blade should not create any friction with the lock ring. If it does, remove the fan and repeat all steps from the beginning.
- Mount the fan blade with the fastening cap. Tighten the fastening cap by turning it to the left – counter-clockwise.
- Place the front protective guard on the fan and use the clamps to attach it to the rear protective guard.
– Align the front protective guard with the rear protective guard using the positioning clamp [ c ] on the bottom side in order to attach both parts to each other properly. Use the bolt and nut at the top of the guards to fasten the guards to each other.
– Press the clamps [ d ] downwards in order to fasten the front and rear protective guards to each other.
Place the
fan on a flat, stable surface. Clean the exterior of the fan using a slightly
damp cloth and then wipe it with a dry cloth. The fan is ready for use.
Using the fan
The range of the remote control is approx. 5 metres at an angle of 30° in
front of the fan. Insert the two supplied AAA 1.5 Volt batteries in the remote
control, as indicated in the drawing. Do take the plus and minus symbols on
the inside of the remote control into account.
The remote control has the same function keys as the fan’s control panel.
Place the
fan on a flat, stable surface. Insert the plug in a wall socket.
Turning the fan on and off
Press the ON/OFF [ AAN/UIT ] key to switch on the fan. By pressing the key
once more, you switch off the appliance.
Setting the speed
With every press on the SPEED [ SNELHEID ] key you change the speed of the
fan:
Setting the timer
Press the TIMER key to start the timer. The time period is increased in steps
of 1 hour when you repeatedly press this key, up to a maximum of 7 hours.
For example, if you want to set the fan to 5 hours, press this button until
the two indicator leds light up, 1u + 4u = 5 hours. The fan will switch off
when the entire programme has been completed.
If you want to stop the timer function or set a new time, you must continue to
press the TIMER key until all indicator leds are off.
Oscillation
This fan is able to oscillate (swerve to the left and right) for a better air
displacement.
If you want to change the wind to an upward or downward direction, you can
simply move the fan head upwards or downwards.
Adjusting the height of the pedestal
In order to adjust the height, loosen the pedestal adjustment nut and move the
fan upwards or downwards. Properly hold on to the fan when loosening the
pedestal adjustment nut, so it cannot drop down unexpectedly. Re-tighten the
pedestal adjustment nut when the fan is at the required height.
Cleaning and maintenance
Before cleaning the fan, you must switch it off with the ON/OFF key [ AAN/UIT ] and remove the plug from the socket.
- Wipe the exterior of the appliance with a slightly damp cloth and dry properly.
- If necessary, you can clean the protective guard using a vacuum cleaner (nozzle).
- Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
- Never submerge the fan in water or any other liquid.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>