PHILIPS LineBase BGP473 Ceiling Mount Light Owner’s Manual
- June 6, 2024
- Philips
Table of Contents
PHILIPS LineBase BGP473 Ceiling Mount Light Owner’s Manual
LineBase, 39460 lm, 320 W, 740 neutral white, Analog, Safety class I
LineBase is breakthrough lighting for the city tunnel, underpass. It’s a
really and amazingly linear lighting yet easy to install, and it’s the ideal
solution to replace fluorescent lighting. The customized lumen output of
LineBase enables lighting designers to have freedom on lighting layout. Its
continous installalation is to create a seamless, brighter, comfortable visual
effect with less flicker. Its plug-and-play electrical connection and remote
waterproof drivers save total cost of owner. The products pass kinds of
safety and durability test to prove a long lifespan on its operation
Warnings and Safety
Strongly recommended to use surge protection device in electricity cabinet to
wire luminaires
Product data
General Information
Driver included| Yes
| Light Technical
Luminous Flux| 39,460 lm
Luminous Efficacy (rated) (Nom)| 120 lm/W
Correlated Color Temperature (Nom)| 4000 K
Color rendering index (CRI)| >70
Light source color| 740 neutral white
Optical cover type| Polycarbonate Di‚use
Operating and Electrical
Input Voltage| 220-240 V
Line Frequency| 50 or 60 Hz
Line Frequency| 50 or 60 H
Inrush curren| 58 A
Power Consumption| 320 W
Power Factor (Fraction)| 0.9
Connection| Connection unit 2-pole
Cable| Cable 0.3 m with connector 2-pole
Temperature
Ambient temperature range| -40 to +50 °C
Controls and Dimming|
Dimmable| Yes
Control interface| Analog
Mechanical and Housing
Housing Material| Aluminum Alloy
Optical cover material| Polycarbonate
Housing Color| Aluminum
Overall length| 1,194 mm
Overall width| 250 mm
Overall height| 90 mm
Effective projected area| 0.067 m²
Dimensions (Height x Width x Depth)| 90 x 250 x 1194 mm
Approval and Application|
Ingress protection code| IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code| IK05 [0.7 J
Protection class IEC| Safety class I
CE mark| –
Flammability mark| –
Initial Performance (IEC Compliant)|
Luminous flux tolerance| +/-10%
Initial chromaticity| (0.3831,0.3798) 5
Power consumption tolerance| +/-10%
Product Data
Order product name| BGP473 LED384 NW 320W G2 F
Full product name| BGP473 LED384 NW 320W G2 F
Order code| 911401600108
Material Nr. (12NC)| 911401600108
Numerator – Quantity Per Pack| 1
Net Weight (Piece)| 10.990 kg
Numerator – Packs per outer box| 1
Dimensional drawing’
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial o‚er and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.