Tikom G7000 Robot Vacuum Cleaner User Guide
- June 6, 2024
- Tikom
Table of Contents
Tikom G7000 Robot Vacuum Cleaner User Guide
Notes:
– Always keep the Charging Station plugged in, otherwise Robot will not
automatically return.
– When the Charging Station connects to AC power, the LED indicator on the
Charging Station is SOLID WHITE
Notes:
Please fully charge robot before use. Manually align the Charging Contacts on
the bottom of the robot with those on the Charging Station.
Important Tips Before Usage
- Please remove any objects from floor that may entangle robot vacuum, such as pet poop, socks, cloths, tissue, toys , slippery and power cords. You can use supplied Cable Ties to organize your wires and power cords.
- Before using the robot on a rug with tasselled edges, please fold the rug edges under.
- Keep robot away from wet areas, such as kitchen or bathing room.
- The robot can climb to the top of objects with a thickness less than 0.63 in/16 mm. Please take the objects away, if you do not want the robot to climb them.
- Keep robot away from spaces between 2.56in/65mm–3.54in/90mm(Robot thickness is 3in/76 mm) to prevent robot from getting stuck, like sofa, cabinet or other furniture. If necessary, you could use supplied Boundary Strip to block off the problem areas.
- Cliff sensors will prevent robot from tumbling down stairs and steep drops in most cases. Sensors are less effective if dirty or used on carpeted / reflective / very dark-colored floors.
It is recommended to apply the Boundary Strip to block off areas where Robot may fall.
- The Robot may not run on certain darker black colored surfaces since the Cliff Sensors that recognize an edge or a stair may regard black color as an edge, then the robot will not clean over it.
- Avoid cleaning high-pile rugs thicker than 0.78 in/20 mm, as they may cause Robot to malfunction.
- While your robot is cleaning, do not pick it up and move it, or move the charging station this could impact the robot’s ability to map your home or back to charging station.
- To keep Robot away from any area or item you do not want Robot to clean, apply the supplied Boundary Strip on the floor with the supplied adhesive tape to create a virtual barrier. Make sure the strips are placed FLAT on the floor.
APP Connection
https://smartapp.tuya.com/tuyasmart
Note:
If fail to connect Wi-Fi in EZ mode as above, please try Wi-Fi connecting
in AP mode, details please check “3.4 Connect Robot with Wi-Fi” on user manual
at page 11.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>