Klim KN01 Laptop Cooling Pad User Guide
- June 6, 2024
- KLIM
Table of Contents
KN01
QUICK GUIDE
THANK YOU!
Thank you for acquiring our KLIM KN01 laptop cooler! We hope that you enjoy this product and that it helps you keep your laptop at an optimal temperature. Please read this guide carefully and ensure all components are installed correctly for maximum performance. If you need any help or if you simply want to share your feedback, please contact us at support@klimtechnologies.com. Our specialists will reply within 24 hours!
Heat shields
If your laptop’s exhausts are located at the back, attach the deflectors above the air intake as shown in the picture. If your laptop does not have rear exhausts, skip this step. You can store these pieces underneath the cooling pad when not in use.
Frontal tabs
Take the frontal tab and insert it in the slot at the front to keep the laptop in place while in a tilted position. You can store this piece underneath the cooling pad when not in use.
Inclination
Select the desired inclination by inserting the support tab in one of the leg sockets. Note: Do not place the support tab directly on the table as this may damage the tab or scratch the surface.
Rubber ring
The KLIM KN01 comes equipped with a rubber ring to help seal the laptop and dissipate heat. You can remove it for cleaning and maintenance and then place it back in.
Connection
Place the laptop on top of the cooling pad and connect both devices using the supplied USB cable. An extra port is provided to plug in other peripherals, such as a keyboard or mouse.
Controls
| LED | SPEED + | SPEED – | ON/OFF |
|---|
Press once to change the color mode. Press for 3 seconds to turn the lights
off.| Press the button to increase fan speed.| Press the button to reduce fan
speed.| Press to turn the fans on and off.
CONTACT
Do you need help with your product? Want to share something with us?
We’d love to hear from you!
Our specialists are available 24/7 so do not hesitate to reach out.
support@klimtechnologies.com
Marcus Excelsior Limited
2512 Longhorn Place Office Tower
8 Argyle Street, Mongkok, Kowloon
Hong Kong| Authorized EU representative
Marcus Excelsior Limited
Bracken Road No 51, Carlisle Offices
018CV48 Dublin, Sandyford
Dublin, Ireland
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>