eureka NES100 Series Stick Vacuum Cleaner Owner’s Manual
- June 6, 2024
- Eureka
Table of Contents
eureka NES100 Series Stick Vacuum Cleaner
Important instructions
For easy assembly, please take a few moments to read this owner’s guide.
If you have questions about your new vacuum, please contact our customer
service HELPLINE at 1-800-282-2886.
We’re here to help!
Eureka stands by our Clean Promise seal.
Learn more at
www.eureka.com/cleanpromise
www.eureka.com
IMPORTANT SAFETY INSTRUCTION
SAFETY GUIDELINES – DEFINITIONS
It is important for you to read and understand this manual.
The information it contains relates to protecting YOUR SAFETY and PREVENTING
PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: To avoid all risks of fire, electrocution or injury, when using
an electrical appliance, make sure you follow the safety measure below:
READ CAREFULLY ALL THE RECOMMENDATIONS BEFORE USING YOUR VACUUM CLEANER
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury
NOTICE: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
WARNING: Before using this appliance, read and follow all warnings and
instructions in this manual, even if you are familiar with this product.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Young children
should be supervised to ensure that they do not play with the appliance.
POLARIZATION INSTRUCTION To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
Safety Direction
Please read this instruction manual carefully before first use. It is
advisable to keep this instruction manual for future reference.
- DO NOT vacuum water, wet objects, liquids, ashes, hot coals, cigarette butts, matches or any hot, smoking or burning objects, etc.
- DO NOT pick up flammable or combustible materials (i.e. lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapor.
- DO NOT pick up toxic material (i.e. chlorine bleach, ammonia, drain cleaner, etc.)
- DO NOT vacuum Toner (for laser printer, copy machines etc.) as there is a risk of fire and explosion.
- DO NOT vacuum plaster, cement etc. as the filter can become blocked.
- DO NOT use vacuum without all the filters fitted.
- DO NOT store or use the appliance near high temperature areas.
- DO NOT run over the power cord with the vacuum cleaner.
- DO NOT use vacuum cleaner if it is blocked. Turn off and clear all blockages before continuing.
- DO NOT use vacuum cleaner with blocked filters. Clean or replace filters before continuing. (refer to User Maintenance section).
- DO NOT use vacuum cleaner if the appliance malfunctions, sounds abnormal, smells, smokes, is dropped or damaged in any manner or any breakage is found during operation.
- DO NOT misuse the cord. Never pull the appliance by the cord or pull to disconnect it from the outlet. Instead, grasp the plug and pull to disconnect.
- DO NOT use vacuum cleaner to pickup large, hard, or sharp objects such as glass, nails, screws, coins, etc. that are likely to cause damage.
- DO NOT leave unattended when plugged in and/or switched on.
- DO NOT use vacuum cleaner if it has been dropped, damaged, left outdoors, or dropped into liquid (water etc.)
- DO NOT close door on cord, or pull cord around sharp edges or corners.
- DO NOT handle the plug or vacuum cleaner with wet hands.
- DO NOT put any objects into openings.
- DO NOT use with any openings blocked and do not restrict airflow.
- DO NOT operate the appliance with a damaged cord or plug. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- DO NOT use without filters in place.
- DO NOT attempt to modify this product in any way.
- DO empty the dust cup and clean the filters regularly for optimal operation of the vacuum.
- DO keep hair, loose clothing, fingers, feet and body parts away from openings or moving parts.
- DO disconnect the appliance from the mains supply before connecting the flexible suction hose.
- DO turn off controls before you connect or disconnect the appliance to or from the mains supply.
- DO disconnect the appliance from the power supply when not in use, before changing the filters, cleaning the filters or connecting/disconnecting the accessories.
- DO use only on dry, indoor surfaces.
- DO use only as described in this manual. Use only manufacturer’s recommended attachments.
- DO keep cord away from heated surfaces.
- DO keep all openings free of dust, lint. hair, and anything that may reduce airflow.
- DO use extra care when vacuuming on stairs.
- DO keep your work area well lit.
- DO store your appliance indoors in a cool, dry area.
- DO ensure children and babies cannot play with plastic bags or any packaging materials.
- DO operate the appliance from a power source of the same voltage, frequency and rating as indicated on the product identification plate.
- If this appliance is used by a third party, DO supply the instruction manual with it. No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling of appliance. This product has not been designed for any uses other than those specified in this manual.
- DO NOT modify the polarized plug to fit a non-polarized outlet or extension cord.
- Keep appliance on a level surface.
- ONLY for domestic use.
- Industrial or commercial use invalidates the warranty.
READ AND SAVE THESE INSTRUCTIONS
Symbols
-
V
volts -
A
amperes -
Hz
hertz -
W
watts -
min
minutes -
AC
alternating current -
DC
direct current
no…………………..no load speed
Class I Construction
earthing terminal (grounded)
safety alert symbol
Class II Construction (double insulated)
/min or rpm……revolutions or reciprocations per minute
When using an extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
The following table shows the correct size to use depending on cord length and
nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller
the gauge number, the heavier the cord.
Transporting your Vacuum
To move your vacuum cleaner from room to room, unplug the unit and either push
the appliance or carry using the carry handle.
Never pull or carry the vacuum cleaner by its cord.
Product View
- Hand Grip
- Cord Wrap
- Power Cord
- Handle
- Quick Release Button
- Hand Vacuum Grip
- Power On/Off
- Dust Cup Latch
- Filter
- Dust Cup
- Removable Floor Nozzle
- Crevice Tool
CAUTION: Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures.
Assembly/Operation
WARNING: Do not operate cleaner with damp or wet filters or without vacuum bags and all filters in place.
Press the quick release button at the base of the hand vacuum grip and insert the handle, making sure it is all the way inserted into the body of the vacuum.
Attach the floor nozzle by inserting it into the opening at the bottom of the
dust cup. Press firmly to secure in place. As a Hand Vacuum
Press the button at the base of the hand vacuum grip and pull the handle away
from the unit. As a Multi-Purpose Vacuum:
The floor nozzle may be used with the hand vacuum to clean wider surfaces. To
attach the floor nozzle to the hand vac, insert it into the opening a the
bottom of the dust cup. Press firmly to secure in place.
Power cord storage
- Turn vacuum off (O).
- Unplug power cord by grasping the polarized plug, NOT the cord, and disconnect from outlet.
- Loop power cord around cord wrap on the handle.
- Clip molded plug to power cord to secure.
WARNING: To avoid injury, turn vacuum OFF and unplug cord from wall when not in use.
Accessories
Maintenance And Care – Emptying and Cleaning
Turn Vacuum off (O). Then, unplug
To remove dirt from the dust cup and filter, hold the vacuum vertically. Depress and hold button on top of the vacuum to release the dust cup as the shown.Gently pull dust cup away from the hand vacuum grip and remove the filter as shown. Empty into waste container.
The dust cup may be rinsed with warm water and a mild detergent if needed. The
dust cup must be thoroughly dried before replacing. Replace filter. Attach
dust cup to vacuum by depressing latch and securely fitting onto hand grip.
Make sure dust cup is correctly secured. DO NOT clean the vacuum cleaner,
components or accessories using petroleum or any other flammable liquid or
solvents, etc.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum cleaner,
components and accessories.
After cleaning, wipe off the moisture on vacuum cleaner, components and
accessories with a dry cloth.
DO NOT place accessories, tools or components in a dishwasher.
To maintain suction and cleaning performance, you can check pre-motor filters
regularly, if needed, pull it out and clean with warm water and a mild
detergent. The filter must be thoroughly dried before put back. Replace with
black side facing out.
CAUTION: Never operate your vacuum cleaner without the filter in place. Doing so may damage the motor and void the warranty.
Troubleshooting
WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting to the vacuum cleaner.
Vacuum cleaner won’t run: Possible causes
- Vacuum cleaner is not plugged in firmly
- Blown fuse/tripped breaker
Remedies
- Check electrical outlet
- Check/replace fuse or reset breaker
Vacuum cleaner won’t vacuum effectively: Possible causes|
Remedies
---|---
1. Filter clogged, wet or dirty.| 1. Follow instructions for cleaning.
2. Dust cup clogged.| 2. Follow instructions for emptying.
Dust blows out of air vent: Possible causes| Remedies
1. Filter not properly secured to filter frame.| 1. Follow instructions for
replacing filter above.
Replacement Parts
Item: | Part No.: | Part Name: |
---|---|---|
1 | ST0101 | Crevice Tool |
2 | ST0102 | Filter |
3 | ST0106 | Pre-Motor Filter |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>