Ace Life ALB-R3600 Toilet Seat Remote Control Bidet User Manual

Ace Life ALB-R3600 Toilet Seat Remote Control Bidet

Important Safeguards

READ ALL INSTRUCTIONS BEFORE USING.
DANGER To reduce the risk of electrocution.

• Do not use while bathing.
• Do not place or store product where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not reach for a product that has fallen into the water. Unplug immediately.

WARNING To reduce the risk of bums, electrocution, fire or injury to persons.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Connect this product to a properly grounded outlet only.
• Unplug the appliance during filling and cleaning.
• Do not touch the power plug with wet hands.
• Properly connect the power cord to the electrical outlet corresponding to the rated voltage of the unit.
• Keep the cord away from heated surfaces.
• Do not use a damaged or loose power cord.
• Before removing the unit from the toilet bowl, disconnect the power plug first.
• Do not connect other electrical appliances to the same power socket connected to the unit.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Never operate this product if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service center for examination and repair.
• Never block the air openings of the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked.
• Keep the air openings free of lint, hair, and the like. Any other servicing should be performed by an authorized service representative.
• Close supervision is necessary when this product is used by, on, or near children or invalids.
• Do not dismantle, repair, or alter the unit.

WARNING To reduce the risk of bums, electrocution, fire or injury to persons.

• Never use while sleeping or drowsy.
• Never drop or insert any object into any opening or hose.
• Do not use outdoors. or operate where aerosol(spray) products are being used or where oxygen is being administered.
• Do not pour or spray water onto the unit.
• Do not use a steam cleaner.
• Keep the unit away from fires or inflammable substances.
• Do not connect to the industrial water supplies.
• Caution against low-temperature bums.
• New hose-sets supplied with the appliance are to be used and old hose-sets should not be reused.

CAUTION To reduce the risk of injury to persons or damage to the product or the property.

• Do not place heavy objects or step on the unit. It may cause product damage or injury.
• When cleaning the unit, do not use any chemicals. Clean the unit with moist, well-wrung soft cloth. For excessive stains, use soft cloth moistened with mild dish-wash detergent and wipe out with dry cloth. It may cause product damage.
• Do not slam down the lid. It may cause product defects.
• Do not lean on the lid. It may cause product defects.
• When not in use for a long period of time, disconnect the power plug and drain the water tank. Tank water may be contaminated and cause skin troubles.
• Do not twist or pull the connection hoses. It may affect the water supply or cause water leakage.
• Do not cover up the warm air outlet or insert hands or other objects. It may cause bum or electric shock.
• Do not operate the unit during product malfunction. Disconnect the power plug and call the authorized service center. It may cause fire or electric shock if the unit is operated while it is out of order.

Marking

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the  Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

• Ingress of water protection : IPX4 (Warm seat only}
• This product was manufactured for household use only.
• Read all operating instructions before installation and use.
• Please save this operating instruction manual and place in an easily accessible location.
• External appearance and specifications are subject to change for improvement of product without notice.

Name of parts

Installation method

Before installation

• Read the instructions carefully before installing.
• Plugin only after complete installation then supply water

1. Separate water supply hose    Turn the water supply valve clockwise to _lock and separate the toilet hose using a spanner.
2. Remove the existing toilet seat
   • Unfasten the nut and remove the toilet seat.
   • Save the old toilet lid and nuts for reinstallation later.

How to use

• STOP
  • Press Stop button when you want to stop the function.
• Posterior / Move
  • Press Posterior/Move button, Wash function works.
  • Press the button again during using this function.Move (Osc1llation)function works
  • Press the Move again, then the Move function stops.
• Feminine / Move
  • The feminine function works.
  • Press the button again during using this function, Move (Osc1llatinQ) function works.
  • Press the Move again. then Move function stops.
• Exclusive
  • Press the Exclusive button, Enema wash works.
  • It starts from the highest water pressure.
• Dry
  • Use this after using the wash function. Sweep the water with toilet paper before using the dry function for pleasant using
  • The Dry function stops in 3minutes.
• Massage
  • Press the Massage button during the Posterior/Feminine function. water pressure pulsates from strong to soft.
  • Press the button again, then the Massage function stops.
• Water pressure / Dry temperature
  • 5 levels of Water pressure/ Dry temperature.
• Nozzle position
  • Control Nozzle position forward or backward.
• Seat temperature / Water temperature
  • 5 levels of Waler temperature/Seat temperature.
• Power save
  • II cuts off the power of the water heater and seat heater. II minimizes the use of power.
• Nozzle dean
  • Press the button, then the nozzle extends out for cleaning.
  • Press the button again, then the nozzle return to its original position.
• Child mode
  • LED displays the setting condition.
  • Users can use Posterior, Feminine,
  • Dry without seat occupied.
• LED Highlight
  • Press the MESSAGE button while not seated to toggle the LED Nightlight feature.
  •  LED Nightlight will toggle between ON and off.

Use Power save

• There are 2 power-saving eco modes to save energy while the seat is idle.
• Press the button once to activate Mode 1 (green LED): This mode will maintain the selected water and seat temperatures for 30 minutes after standing up. After that, the water heater will turn OFF, and seat temperature will reduce to 30’C. Both water and seat heating will turn OFF if idle for 24 hours.
• Press the button twice to activate Mode 2 (red LED). This will turn both the water and seat heaters OFF until someone sits down.
• If a user sits down while either power saving mode is on, the water and seat heaters will turn on and work up to the preset temperatures. This will take about 5 minutes.
• When the user stands up, the water heater and seat heaters will automatically return to power save Mode.

IMPORTANT

• If you prefer a consistently warm seat and heated water each time you sit down, we would advise you to turn off the power-saving modes.
• To turn off the power-saving modes, press POWER SAVE until the LED is off.

Clean the Nozzle

• Use soft cloth or toothbrush to clean the nozzle.
• Do not use Abrasive, Volatile detergent, Acid/Alkaline detergent, It may cause breakage or trouble.

Nozzle clean (Automatic) Press the Nozzle clean button under the seat not occupied, then the nozzle extends out for self-cleaning for 2minutes.

Nozzle clean (Manual)

• Press the Nozzle clean button for 4seconds.
• The nozzle extends out for 2minutes.
• Clean the nozzle using a toothbrush.
• Wipe the nozzle ambient with a soft cloth or brush.
• Do not pull out or push the nozzle forcibly.
• Nozzle clean function does not work when seat occupied.
• Nozzle clean function does not work in Child mode.

Troubleshooting

When you think the product is out of order, refer to the following able for immediate measures.

Self-diagnosis

Specifications

Wash

| Posterior wash| 0.7 L/Min
Feminine wash| 0.8 L/Min
Heater Capacity| 1100~1309W
Tank Capacity| 0.6L
Water temperature| Room temp – 40°C
Safety device| Thermal Fuse, Thermostat,Water Level Sensor

Dryer

| Heater Capacity| 150-178W
Air temperature| Room temp – 55°C
Safety device| Thermal Fuse

Heated seat

| Heater Capacity| 55~65W
Seat temperature| Room temp – 40°C
Safety device| Thermal Fuse
Power cord length| 1.3M
Product dimension| 392mm x 533mm x 139mm Elongated
392mm x 495mm x 139mm Round
Product weight| 3.5kgs

Warranty Product Warranty Card

• We warrant our products to be free from manufacturing defects under normal use and service for a period of one(1) year after purchase. This warranty is extended only to the original purchaser.
• For product defects, please contact your vendor or our service center
• Product Name Model Name
• Date of Purchase Seria l Number
• Name of Purchase Warranty
• During the duration of the warranty period, if a product defect occurs during normal application as stated in the Instruction Manual, Cautionary Notes, Direction Labels, etc., the product is applicable for after-sales service free of charge.
• Even during the warranty period, after-sales service is not applicable free of charge in case of the following conditions
  1. Damage occurring from customer negligence or fault, and defect or damage occurring from wrongful repair or alteration.
  2. Defect or damage occurring from fire, gas, flood, earthquake, lightning, other natural calamities, pollution, or abnormal electrical power.
  3. Defect or damage occurring from outside of normal household usage.
  4. (long-term public usage, used inside a vehicle, installed inside a vessel, etc.)
  5.  Defect or damage occurring from the transportation of mistreatment after purchase.
  6.  Defect or damage occurring during removal after installation.
  7. Wearing of consuming parts.(Packing, Filters, etc.)
  8. Product reinstallation by customer request.
  9.  Read the Instruction Manual carefully before requesting for after-sales services since charges will be invoiced for faulty service call visits.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>