ACE LIFE ALB-RF5805 Toilet Seat User Manual

ACE LIFE ALB-RF5805 Toilet Seat

Product Information

The Remote Controller Model IPX7-REMO is a wireless device designed for controlling compatible equipment. It complies with Part 15 of the FCC Rules and operates within the FCC radiation exposure limits for an uncontrolled environment. The device is equipped with an FCC ID: 2AY48IPX7-REMO.

Specifications

• Model: IPX7-REMO
• FCC ID: 2AY48IPX7-REMO

Caution: Any modifications made to the device that are not expressly approved by the responsible party for compliance may void the user’s authority to operate the equipment. FCC Compliance Information: The device complies with Part 15 of the FCC Rules, which means it meets the requirements for operation without causing harmful interference. It is also designed to accept any interference received, including interference that may cause undesired operation.

Product Usage Instructions

1. Ensure that the compatible equipment you wish to control is turned on and in a ready state.
2. Insert batteries into the Remote Controller Model IPX7-REMO according to the indicated polarity.
3. Point the Remote Controller towards the compatible equipment and press the desired buttons to initiate the corresponding actions.
4. If the Remote Controller is not functioning properly or if it fails to control the equipment, check the battery level and replace the batteries if necessary.
5. Avoid exposing the Remote Controller to excessive moisture or extreme temperatures, as this may damage the device.
6. Keep the Remote Controller away from strong electromagnetic fields, as they may interfere with its operation.
7. Follow all safety precautions and guidelines provided by the manufacturer of the compatible equipment.

For more detailed instructions on how to use the Remote Controller Model IPX7-REMO, please refer to the user manual provided with the compatible equipment or contact the manufacturer for assistance.

Important Safeguards

READ ALL INSTRUCTIONS BEFORE USING

• DANGER To reduce the risk of electrocution.
• Do not use while bathing.
• Do not place or store product where it can fal or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not reach for a product that has fallen into water. Unplug immediately.

WARNING
To reduce the risk of bums, electrocution, fire or injury to persons.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Connect this product to a properly grounded outlet only.
• Unplug the appliance during filling and cleaning.
• Do not touch the power plug with wet hands.
• Properly connect the power cord to the electrical outlet corresponding to the rated voltage of the unit.
• Keep the cord away from heated surfaces.
• Do not use damaged or loose power cord.
• Before removing the unit from the toilet bowl, disconnect the power plug first.
• Do not connect other electrical appliances to the same power socket connected to the unit.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a  person responsible for their safety.
• Never operate this product if it has a damaged cord or plug, if it is not working property,
• if it has been dropped or damaged, or dropped into water.
• Return the product to a service center for examination and repair.
• Never block the air openings of the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked.
• Keep the air openings free of lint, hair, and the like.
• Any other servicing should be performed by an authorized service representative.
• Close supervision is necessary when this product is used by, on, or near children or invalids. mDo not dismantle. repair. or alter the unit.

Important Safeguards

WARNING To reduce the risk of burns, electrocution, fire or injury to persons,

• Never use while sleeping or drowsy.
• Never drop or insert any object into any opening or hose.
• Do not use outdoors. or operate where aerosol spray) products are being used or where oxygen is being administered.
• Do not pour or spray water on to the unit.
• Do not use steam cleaner.
• Keep the unit away from fires or inflammable substance.
• Do not connect to the industrial water supplies.
• Caution against low temperature burns.
• New hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.

CAUTION
To reduce the risk of injury to persons or damage to the product or the property.

• Do not place heavy objects or step on the unit.
• It may cause product damage or injury.
• When cleaning the unit, do not use any chemicals. Clean the unit with moist, well-wrung soft cloth. For excessive stains, use soft cloth moistened with mild dish-wash detergent and wipe out with dry cloth.
• It may cause product damage.
• Do not slam down the lid.
• It may cause product defect.
• Do not lean on the lid.
• It may cause product defect.
• When not in use for a long period of time, disconnect the power plug and drain the water tank.
• Tank water may be contaminated and cause skin troubles.
• Do not twist or pull the connection hoses.
• It may affect water supply or cause water leakage.
• Do not cover up the warm air outlet or insert hands or other objects.
• It may cause bum or electric shock.
• Do not operate the unit during product malfunction.
• Disconnect the power plug and call the authorized service center.
• It mav cause fire or electric shock if the unit is operated while it is out of order.

Grounding Instructions

WARNING

• Improper use of the grounding plug can result in risk of electric shock.
• This product is for use a nominal 120v circuit and a GFCI (ground fault circuit interrupter) receptacle is required for use with this product. Do not use this product with an ungrounded outlet. Do not use an extension cord with this product.
• If you do not have a GFCI receptacle, contact a qualified electrician to have installed.

Name of parts

Installation method

Before installation

• Read the instructions carefully before installing.
• Plug in only after complete installation then supply water

Installation procedure

1. Separate water supply hose
   • Turn the water supply valve clockwise to lock, and separate the toilet hose using a spanner.
2. Remove the existing toilet seat
   • Unfasten the nut and remove the toilet seat.
   • Save the old toilet lid and nuts for reinstallation later
3. Connect T-valve
   • Install T-valve as shown
4. Insert the base bracket.
   • Allign the base bracket groove with the toilet seat hole.
   • Insert the fixing bolt into the base bracket and toilet seat hole.
5. Insert the bidet body
   • Mount the main bidet into the fixing holes.
   • Align the front of the bidet body and the front of the toilet beforetastening the nuts
6. Connect the flexible hose
   • Connect the flexible hose to the T-valve and the main body.
   • Turn the water supply valve counterclockwise to allow water flow.
   • Insert the main bidet intothe groove on the installed base bracket.

Operation check

1. Turn the water supply valve counterclockwise to check for water leakage.
2. Connect the power plug into electrical outlet.
3. Check the function for each type of use.

How to use

• Posterior / Move
  • Press Posterior/Move button,Wash function works.
  • Press the button again during using this function,Move (Oscillation function works
  • Press the Move again, then Move function stops.
• Dry
  • Use this after using wash function.
  • Sweep the water with toilet paper before using dry function for pleasant using
  • The Dry function stops in 3minutes Water pressure /
• Dry temperature
  • 5 levels of Water pressurel Dry temperature.
• Nozzle position
  • Control Nozzle position forward or backward.
• Nozzle Sanicare
  • When pressing the button, it automatically sterilizes the nozzle for 40 secs. (Only works when the seat is idle)
• Bowl Sanicare
  • When pressing the button, It automaticaly sterilizes the toilet bowl for 45 secs.(Only works when the seat is idle)
• Nozzle dean
  • Press the button, then the nozzle extend out for cleaning.
  • Press the button again, then the nozzle return to original position.
• STOP
  • Press Stop button when you want to stop the function.
• Massage
  • Press the Massage button during Posterior/Feminine function. water pressure pulsate from strong to soft.
  • Press the button again, then Massage function stops.
• Feminine / Move
  • Press Feminine/Move button,
• Feminine function works.
  • Press the button again during using this function, Move (Oscillating) function works.
  • Press the Move again,then Move function stops.
• Seat temperature /
  • Water temperature
  • 5 levels of Water temperature/ Seat temperature. Memory User 1 Buttons
• Save
  • Sit on the seat and select your Wash cyclelrear, front). Adjust the water pressure, Nozzle position.
  • Press User 1 for 3 seconds. A beep-beep wil occur, and the LED blink (beeee) to confirm that saving has been complete.
• Call
  • Sit on the seat and Press User 1. A beep will occur, and the LED blink (cee0o› to indicate that User Memory has been activated.
  • If you press the same user button again or 20 minutes have elapsed, you will exit user mode and reverts to the previous settings. Memory User 2 Buttons
• Save
  • Sit on the seat and select your Wash cyde(rear, front). Adjust the water pressure, Nozzle position.
  • Press User 2 for 3 seconds. A beep-beep willoccur, and the LED binkiece.) to confirm that saving has been complete
• Call
  • Sit an the seat and Press User 2. A beep wil occur, and the LED bink (ec.co) to indicate that User Memory has been activated.
  • If you press the same user button again or 20 minutes have elapsed, vou will exit user mode and reverts to the previous settings.

Maintenance

Use Power save

• Press the Power save button to save energy while no use.
• Press the button once(general saving mode) then LED(green light turns ON, maintains the preset temperature for 30minutes after stand up,after that maintains water heater OFF, seat temperature at 30 C. (water heater & seat heater OFF in 24hours)
• Press the button twice(strong saving mode), then LED(red light) turns ON, water heater & seat heater OFF.
• To stop Power save funtion, press the button to turn LED off. In case user sit down while Power save mode, then seat sensor turns ON, water heater and seat heater start working automatically up to the preset temperature. it takes 5minutes to get to the preset temperature)
• When user stand up, the seat sensor turns OFF, water heater and seat heater automatically return to Power save mode.
• Washing or Dry function can work under Power save mode.

Clean the Nozzle

• Use soft cloth or toothbrush to clean the nozzle.
• I Do not use Abrasive, Volatile detergent, Acid Alkaline detergent. It may cause breakage or trouble.

Nozzle clean (Automatic)

• Press the Nozzle clean button under seat not occupied, then the nozzle extend out for self-cleaning for 2minutes.

Nozzle clean (Manual)

• Press the Nozzle clean button for seconds.
• Nozzle extends out for minutes.
• Clean the nozzle using toothbrush.
• Wipe the nozzle ambient with soft cloth or brush.
• Do not pull out or push the nozzle forcibly.
• Nozzle clean function does not work when seat occupied
• Nozzle clean function does not work in Child mode.

Troubleshooting

When you think the product is out of order, refer to the following for immediate measures.
Power supply

Posterior wash, Feminine wash, Exclusive wash function

Heated seat

Seat sensor

Power Save

Self diagnosis

Specifications

Warranty

Product Warranty Card

• We warrant our products to be free from manufacturing defects under normal use and service for a period of one(1) year after purchase.
• This warranty is extended only to the original purchaser.
• For product defect, please contact your vendor or our service center.

< Free After-sales Service Regulations >

• During the duration of the warranty period, if product defect occurs during normal application as stated in the Instruction Manual, Cautionary Notes, Direction Labels, etc., the product is applicable for after-sales service free of charge.
• Even during the warranty period, after-sales service is not applicable free of charge in case of the following conditions:
  1. Damage occurring from customer negligence or fault, and defect or damage occurring from wrongful repair or alteration.
  2. Defect or damage occurring from fire, gas, flood, earthquake, lightning, other natural calamities, pollution, or abnormal electrical power.
  3. Defect or damage occurring from outside of normal household usage. (long term public usage, used inside a vehicle, installed inside a vessel, etc.)
  4. Defect or damage occurring from transportation of mistreatment after purchase.
  5. Defect or damage occurring during removal after installation.
  6. Wearing of consuming parts.(Packing, Filters, etc.)
  7. Product reinstallation by customer request.
  8. Read the Instruction Manual carefully before requesting for an after-sales services since charges will be invoiced for faulty service call visits.

CONTACT

• Head office & Factory
• 48 Chupalsandan-ro Paengseong-eup Pyeongtaek-si Gyeonggi-do 17998 Republic of Korea
• Tel: +82-41-425-0116
• Fax: +82-41-425-0117
• Specifications for Remote Controller
• Model: IPX7-REMO
• FCC ID: 2AY48IPX7-REMO

FCC

FCC Information to Remote Controller User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

• This product was manufactured for household use only.
• Read all operating instructions before installation and use.
• Please save this operating instruction manual and place in an easily accessible location.
• External appearance and specifications are subject to change for improvement of product without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>