Cuisinart SCM-10 Snow Cone Maker Instructions

: June 6, 2024
: Cuisinart

Cuisinart SCM-10 Snow Cone Maker

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS.
Unplug from outlet when not in use, before assembling or disassembling, and before cleaning.
To protect against the risk of electrical hazards, do not immerse the Cuisinart™ Snow Cone Maker in water or other liquids.
Avoid contact with moving parts. Never place fingers or other utensils into the ice chute. NEVER TOUCH BLADE.
Do not operate the Cuisinart™ Snow Cone Maker or any electrical equipment with a damaged cord or plug, or after the unit malfunctions or is dropped or damaged in any manner. Return it to the nearest authorized service facility for examination, repair, or adjustment.
When the Cuisinart™ Snow Cone Maker is used by or near children or individuals with certain disabilities, close supervision is necessary.
Do not use outdoors.
D o is not let cord hang over the edge of table or counter, or touch hot surfaces.
Do not place on/near a hot gas burner, electric burner, or in a heated oven.
Check the ice chute for the presence of foreign objects before using and only when the appliance is unplugged.
Use only attachments that are included in the packaging of the Cuisinart™ Snow Cone Maker. The use of other attachments may cause fi re, electric shock or injury.
Do not operate your appliance in an appliance garage or under a wall cabinet. When storing in an appliance garage, always unplug the unit from the electrical outlet. Not doing so could create a risk of fi re, especially if the appliance touches the walls of the garage or the door touches the unit as it closes.
Do not use the appliance for anything other than its intended use.
Do not allow children access to plastic packaging bags.
Do not place the unit in a dishwasher.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

POLARIZATION INSTRUCTIONS

The Cuisinart™ Snow Cone Maker has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plugin anyway. This appliance is for 120 volts only and should not be used with a converter.

PARTS AND FEATURES

Removable snow bin
Main housing
Ice chute
Ice press
BPA-free plastic cones (4)
Paper cones (12) – not shown
Fold-away cone storage
Non-skid feet
Toggle switch (on/off)
Ice scooper

SAFETY FEATURES

Interlock removable snow bin – ice-shaving mechanism will not start if the snow bin is not correctly placed beneath it. This eliminates the chance of fingers or foreign objects getting in and prevents ice from flying out.
Interlock ice chute – ice-shaving mechanism will not start until the ice press is closed. This ensures that fingers and foreign objects will not get in.

BEFORE FIRST USE

Carefully unpack your Cuisinart™ Snow Cone Maker. Remove plastic bags from all parts of the unit. Be sure that the unit has not been damaged during transport. Do not leave plastic bags around children.
Rinse the snow bin with water and a non-abrasive cleanser, and then dry thoroughly.

OPERATING INSTRUCTIONS

Place the unit on a fl at, the sturdy surface where it will not be knocked over.
Check the ice chute for the presence of foreign objects before plugging in. WARNING: DO NOT TOUCH THE BLADE.
Insert the removable snow bin onto the main housing. An interlock safety feature will prevent the unit from turning on if not properly in place.
Be sure that the toggle switch is set to the OFF position and plugged into an outlet.
To begin shaving ice, drop approximately 8–12 ice cubes (depending on size and shape) into the ice chute. Do not overfill or the interlock safety feature will prevent the shaving mechanism from turning on.
DO NOT ATTEMPT TO PUSH ICE CUBES INTO BLADES USING HANDS OR INSTRUMENTS.
Flip the toggle switch to the ON position and firmly push the ice press down to start the ice-shaving mechanism.
When shaving multiple batches of ice cubes, it is important to flatten the snow in the snow bin. You will notice a mound of snow is formed directly under the ice-crushing mechanism, and if not flattened this could stop the shaving mechanism from operating properly. To flatten, simply remove the snow bin and either empty freshly shaved snow into another container or flatten within the snow bin using the ice scooper.
When all the ice has been shaved, turn the toggle switch to the OFF position and unplug.
Remove the snow bin from the main housing and use the ice scooper to shape your snow cones.
Add ingredients specified in the recipe section or as desired.

IMPORTANT NOTICE:
Operate the ice press in a straight downward motion into the ice chute when crushing ice. Under normal operation, you will hear a consistent grinding of the ice. (Image 1)

Twisting the ice press to the LEFT or RIGHT (instead of straight down) when crushing ice may cause the pusher to come in contact with the blade, resulting in a LOUD CRACKING NOISE. (Image 2)

If this occurs, STOP USE IMMEDIATELY, discard shaved ice from the snow bin and call Cuisinart Customer Service at 1-800-726-0190.

HELPFUL HINTS

It is important to shave ice cubes fresh from the freezer. Partially melted ice cubes could keep the shaving mechanism from operating properly. NOTE: If a large ice cube becomes lodged in the unit so that the blade cannot reach it, flip the toggle switch to the OFF position and unplug from the outlet. Empty freshly shaved snow from the snow bin, place snow bin back on the main housing, then pour warm water down the ice chute until lodged ice cube melts or falls free. Empty the water from the snow bin, and dry thoroughly before placing back on the main housing. Resume feeding ice cubes through the ice chute.
If needed, additional paper cones can be purchased online.

CLEANING AND MAINTENANCE

Before performing any cleaning and maintenance operations, please be sure that the toggle switch is in the OFF position and that the unit is unplugged.

NEVER IMMERSE THE UNIT IN WATER OR PLACE IT IN A DISHWASHER.
WARNING: BLADE IS SHARP. DO NOT come in contact with the blade or attempt to reach inside the ice chute to clean the blade.
To clean the blade shaving mechanism, pour warm water down the ice chute to clear any ice or syrup residue that may have become lodged inside while crushing ice.
Wash the snow bin, plastic cones, and ice scooper using a non-abrasive cleanser and water, or place it on the top rack of the dishwasher. Dry thoroughly.
Wipe main housing and ice press with a clean, damp cloth.

Any other servicing should be completed by an authorized service center.

Limited Three-Year Warranty (U.S. and Canada ONLY)

This warranty is available to consumers only. You are a consumer if you own a Cuisinart™ Snow Cone Maker that was purchased at retail for personal, family, or household use. Except as otherwise required under applicable law, this warranty is not available to retailers or other commercial purchasers or owners.
We warrant that your Cuisinart™ Snow Cone Maker will be free of defects in materials and workmanship under normal home use for 3 years from the date of original purchase. We recommend that you visit our website,
www.cuisinart.com for a fast, efficient way to complete your product registration. However, product registration does not eliminate the need for the consumer to maintain the original proof of purchase in order to obtain the warranty benefits. In the event that you do not have proof of purchase date, the purchase date for purposes of this warranty will be the date of manufacture.
If your Cuisinart™ Snow Cone Maker should prove to be defective within the warranty period, we will repair it, or if we think necessary, replace it. To obtain warranty service, simply call our toll-free number 1-800-726-0190 for additional information from our Consumer Service Representatives, or send the defective product to Consumer Service Center at Cuisinart, 7475 North Glen Harbor Blvd., Glendale, AZ 85307.
To facilitate the speed and accuracy of your return, please enclose $10.00 for shipping and handling of the product.
Please pay by check or money order made payable to Cuisinart (California residents need only supply proof of purchase and should call 1-800-726-0190 for shipping instructions).
NOTE: For added protection and secure handling of any Cuisinart product that is being returned, we recommend you use a traceable, insured delivery service. Cuisinart cannot be held responsible for in-transit damage or for packages that are not delivered to us. Lost and/or damaged products are not covered under warranty. Please be sure to include your return address, daytime phone number, description of the product defect, product model number
(located on the bottom of the product), the original date of purchase, and any other information pertinent to the product’s return.

CALIFORNIA RESIDENTS ONLY

California law provides that for In-Warranty Service, California residents have the option of returning a nonconforming product (A) to the store where it was purchased or (B) to another retail store that sells Cuisinart products of the same type. The retail store shall then, at its discretion, either repair the product, refer the consumer to an independent repair facility, replace the product, or refund the purchase price less the amount directly attributable to the consumer’s prior usage of the product. If the above two options do not result in the appropriate relief to the consumer, the consumer may then take the product to an independent repair facility if service or repair can be economically accomplished. Cuisinart and not the consumer will be responsible for the reasonable cost of such service, repair, replacement, or refund for nonconforming products under warranty. California residents may also, according to their preference, return nonconforming products directly to Cuisinart for repair, or if necessary, replacement, by calling our Consumer Service Center toll-free at 1-800-726-0190. Cuisinart will be responsible for the cost of the repair, replacement, shipping, and handling of such products under warranty.

BEFORE RETURNING YOUR CUISINART PRODUCT

If you are experiencing problems with your Cuisinart product, we suggest that you call our Cuisinart Service Center at 1-800-726-0190 before returning the product for service. If servicing is needed, a Representative can confirm whether the product is under warranty and direct you to the nearest service location. Your Cuisinart™ Snow Cone Maker has been manufactured to the strictest specifications and has been designed for use only in 120-volt outlets and only with authorized accessories and replacement parts. This warranty expressly excludes any defects or damages caused by attempted use of this unit with a converter, as well as by use with accessories, replacement parts or repair service other than those authorized by Cuisinart. This warranty does not cover any damage caused by accident, misuse, shipment or other than ordinary household use. This warranty excludes all incidental or consequential damages. Some states do not allow the exclusion or limitation of these damages, so these exclusions may not apply to you. You may also have other rights, which vary from state to state.
Important: If the nonconforming product is to be serviced by someone other than Cuisinart’s Authorized Service Center, please remind the servicer to call our Consumer Service Center at 1-800-726-0190 to ensure that the problem is properly diagnosed, the product is serviced with the correct parts, and the product is still under warranty.

RECIPES

You can purchase store-made snow cone flavors or try creating your own with the following recipes and simple suggestions. Drizzle any of the following over freshly shaved snow…and enjoy

Flavored drink mixes
Chocolate syrup
Pre-made juice smoothies
Orange juice
Grape juice

Helpful Tips:

It is best to make recipes in advance as some will require time to cool.
Be sure that your syrup is completely cooled before drizzling over shaved ice.
Squeeze bottles work best to pour syrup over shaved ice.

Traditional Snow Cone

1 cup water
2 cups white sugar
1(0.13 ounce) package unsweetened, fruit-ﬂavored soft drink mix
24 ice cubes

In a saucepan, combine the sugar and water. Bring to a boil, and boil for about 1 minute, stirring often until sugar is dissolved. Remove from heat, and stir in the powdered drink mix. Allow to cool in the refrigerator, and store in a container that will be easy to pour. Pour the mixture over shaved ice to flavor it.

Sugar-Free Snow Cone

3 cups water
3 cups Splenda™ (sugar substitute) ounce unsweetened powdered juice mix
24 ice cubes

In a saucepan, combine the Splenda™ and water. Bring to a boil, and boil for about 1 minute, stirring often until sugar is dissolved. Remove from heat, and stir in the powdered juice mix. Allow to cool in the refrigerator, and store in
a container that will be easy to pour. Pour the mixture over shaved ice to flavor it.

Fresh Fruit Snow Cone

1 bag fresh or frozen organic fruit (strawberry, blueberry, or other)
¼ cup sweetener (agave nectar, maple
½ syrup or simple syrup from organic sugar) to taste
24 ice cubes

When using frozen fruit, thaw the fruit for one to two hours. Blend until smooth. Add the sweetener of your choice, mix, and then pour over shaved ice to taste.

Sour Snow Cone

1 cups water
2 cups sugar
1 (0.13-oz.) envelopes unsweetened pink lemonade drink mix
1 (0.13-oz.) envelope unsweetened cherry drink mix
24 ice cubes

In a saucepan, combine the sugar and water. Bring to a boil, and boil for about 1 minute, stirring often until sugar is dissolved. Remove from heat, and stir in the powdered drink mixes. Allow to cool in the refrigerator, and store in
a container that will be easy to pour. Pour the mixture over shaved ice to flavor it.

Ice Cream-Flavored Snow Cone

4 ounces evaporated milk
2 ounces concentrate of your choice (concentrates that work great as cream ﬂavors are banana, peach, vanilla, strawberry, piña colada, coconut. Acidic ﬂavors will not work well with the evaporated milk)
24 ice cubes

Combine evaporated milk with the concentrate of your choice. Pour mixture over shaved ice to taste.
NOTE: Once the evaporated milk is added, the flavor must be refrigerated and will last for approximately 4 to 5 days.

Cup of “Joe” Cone

2 cups water
1 cup sugar
1 cup instant espresso granules (14-oz.) can sweeten condensed milk
24 ice cubes

In a saucepan, combine the sugar and water. Bring to a boil, and boil for about 1 minute, stirring often until sugar is dissolved. Whisk in instant espresso until completely dissolved, pour into a bowl, cool to room temperature, then refrigerate. When cool, whisk in condensed milk. Refrigerate until completely chilled. Pour about ½ cup syrup over 1 cup shaved ice or to taste.

Vanilla-Berry Shaved Ice

6 cups water
3 cups sugar
1 cup corn syrup
3 teaspoon pure vanilla extract (optional)
2 pounds coarsely chopped fresh berries (strawberries, blueberries, raspberries, or blackberries, about 2 cups)
24 ice cubes

In a saucepan, combine the water, sugar and corn syrup. Bring to a boil, and boil for about 1 minute, stirring often until sugar is dissolved. Remove from heat and allow to cool for 10 minutes. If using vanilla extract, stir in at this point. Stir the berries into the mixture and then transfer mixture to a blender and blend until puréed. Let mixture chill thoroughly before drizzling approximately 6–8 tablespoons of the syrup over shaved ice.

Piña Colada Shaved Ice

1 cup water
1 cup sugar
2 cup unsweetened coconut milk (stir well)
1 pineapple (peeled, cored, and diced) or canned pineapple (about 4 cups)
3 cup unsweetened, shredded coconut, lightly toasted (optional)
24 ice cubes

In a saucepan, combine the water and sugar. Bring to a boil, and boil for about 1 minute, stirring often until sugar is dissolved. Let cool to room temperature. Put the sugar syrup, coconut milk, and 4 cups of pineapple in a blender and blend until smooth. Let mixture chill thoroughly before drizzling approximately 6–8 tablespoons of the syrup over shaved ice.