FORIOUS FB-0302B Matte Black Bathroom Faucet Installation Guide

FORIOUS FB-0302B Matte Black Bathroom Faucet

FB-0302 Package Includes

1. Bathroom Faucet
2. “O-Ring
3. Rubber Gasket
4. Metal Gasket
5. Fixing Screw
6. Fixing Nut
7. Hot and Cold Water Supply Hoses
8. Deck Plate(Vessel sink bathroom faucets do not contain deck plates)

Before Installation

• Turn off the water supply valves. Clean the mounting area of the sink.
• The recommended width of the mounting area is between 15cm-31cm (6″-12″) measured between the centres of outside mount holes.
• The diameter of the mount holes must be 35mm (1.38″).
• Max countertop thickness is 35mm (1.38″)
• Water pressure: Min 0.05MPa (7 psi) / Max 0.75MPa (109 psi)
• Water temp: Min ≥ 20°C (68°F) / Max ≤ 85°C (185°F)

Installation Steps

1. Place the O-ring at the bottom of the faucet.

2. Run the deck plate through the water inlet hose and place it at the bottom of the faucet body.
   Note:

   • The deck plate installation is optional.
   • Vessel Sink Bathroom Faucets do not need to be installed on the deck plate.

3. Pass the water inlet hose of the faucet through the sink hole and place the faucet standing on the sink.

4. Put the rubber gasket into the fixed screw.

5. Put the metal gasket into the fixed screw.

6. Screw the fixing nut to the fixed screw and tighten it with a Screwdriver.

7. Notice: Open the water valve at this time, to drain out the sewage in the water pipe for 15 seconds and then close it.

8. Screw the water inlet hose nut onto the water valve and tighten it with a wrench. Finally, open the water valve and enjoy your waterfall. (If your valve thread doesn’t match, please contact the seller

   • We reserve the right to make revisions to product design without notice.

Maintenance

• Always operate the faucet gently to ensure years of use.
• To maintain the finish, always blot dry any water on the faucet surface. Clean with a damp non-abrasive sponge and wipe dry with a clean soft cloth.
• Although the finish is very durable, certain cleaners can damage it. DO NOT use detergent powder, polishing powder, a nylon brush, or anything that may scratch the finish.
• DO NOT use acidic cleaners on the faucet.
• If air temperature falls below freezing (0°C / 32°F), run the faucet to prevent freezing.
• Shut off the water supply valve when not in use for long periods.
• We reserve the right to make revisions to product design without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>