Danfoss 009R9666 Shut Off Ball Valve Type GBC Installation Guide
- June 15, 2024
- Danfoss
Table of Contents
Danfoss 009R9666 Shut Off Ball Valve Type GBC
- Refrigerants: R 744 (CO2 )
- Max. working pressure(PS/MWP): 90 bar / 1305 psig
- Media temperature range: -40 °C – 100°C /-40 °F – 212°F
Warning
Only authorized persons are allowed to operate this valve, as closing can
cause a build-up of excessive pressure in the system. For the application used
with R744 as part of a secondary loop or cascade system should refer to the
datasheet for more attention. Remove cap and access cap (if present)
Opening valve
OPEN Position
Install Schrader valve
Tighten cap
Tighten the cap with approx. torque
Any information, including, but not limited to information on the selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative and is only binding if and to the extent relives the right mate ins putative worried. This. anties to products ordered but not it ered problem that I saal questions are wide wind oranges to form, fit or All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>