JLAB Talk Go USB Micro Phone User Manual
- June 6, 2024
- JLab
Table of Contents
TALK GO USB
MICROPHONE
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlab.com or visit jlab.com/contact
REGISTER TODAY
Product updates | How-to tips
-
SETUP
Connect USB-C to Talk GO microphone.
Connect to your PC or Mac USB INPUT. -
Enter your PC or Mac settings to make sure the connection is established.
-
SETUP TALK GO with PC / MAC
SETUP TALK GO WITH PC (WINDOWS 7, 8, or 10)
- From the Start menu, select the Control Panel.
- From the Control Panel, select the Sound icon.
- Select the Recording tab and select “JLab Talk GO”.
- Select the Playback tab and select “JLab Talk GO”.
SETUP TALK GO WITH MAC (macOS 10.10 or HIGHER)
- Open System Preferences and select the Sound icon.
- Select the Input tab and select “JLab Talk GO”.
- Select the Output tab and select “JLab Talk GO”.
- From this screen, set the Output volume to the desired level.
CONTROLS
IN USE
- The Talk GO works with almost any recording software installed on macOS, Windows, or Linux. Review in your software’s settings and adjust accordingly.
- No additional drivers/software is needed for the Talk GO. Simply plugin and set up in device settings.
- Talk GO will not work through a power bank/battery pack. It will only work with USB-A input with an operating system.
Shop products |
Product alerts | Burn-in your headphones
JLab Store + Burn-in Tool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>