39752 Phantomx Multimedia Head Unit User Manual
- June 6, 2024
- Phantom
Table of Contents
M.N.C
“PHANTOMX” MULTIMEDIA HEAD UNIT – USER MANUAL
39752
M.N.C “PHANTOMX” MULTIMEDIA HEAD UNIT
BT/USB/MICRO SD/AUX
Thank you for choosing our product, we hope you will enjoy using our product for a long time.
The new generation of MNC head units has arrived! You don’t have to touch the head unit anymore, just slide your hand in front of it and you can switch to a radio channel or a song, for example. The PhantomX has a fully touch-sensitive front panel and gesture control, giving the device a sleek, elegant look. You can also take your music with you on USB data storage, but it is also possible to play music via AUX and Bluetooth connection.
- Touch buttons, gesture control
- Voice control
- Easy to install
- Standard 1 DIN size
- Hands-free function
- Dual USB / AUX / Bluetooth
- Remote controller
- In black
- Phone charging function
- Sound mode selection
(Classic/Rock/Jazz/Pop/Off)
RADIO:
Frequency: | 87,5 MHz – 108 MHz |
---|---|
Signal/noise ratio: | ≥50 dB |
FM sensitivity: | ≤40 dB |
Stereo crosstalk: | ≥20 dB |
MEDIA PLAYER:
Accepted formats:| MP3/WMA/MVB/RM/RMVB/FLV/3GP/
PEG/DivX/Xvid/DAT/VOB/AVI/MP5/
MP4/FLAC/OGG/WAV/MKV
---|---
Output USB:| 5 V – 2.1 A
Frequency transmission:| 20 Hz – 20 kHz
MP3 bitrate:| 8 – 320 kb/s
Stereo crosstalk:| ≥ 35 dB
Signal/noise ratio:| ≥ 50 dB
Harmonic distortion:| ≤ 5%
GENERAL:
Voltage (negative ground): | 12 V DC |
---|---|
Music output power: | 4 x 50 W |
Speaker impedance: | 4 – 8 Ω |
Dimensions: | 178 mm x 50 mm x 100 mm |
- Large clock
- POW/MOD – Power button/mode selector (Bluetooth, AUX, Radio)
- Voice control
- Frequency search/Switch between saved channels, Put down Calls
- Frequency search/Switch between saved channels, answer Calls
- Start Music, Pause /sound profile modification (Bass, Tre, Bal, Fad, Loud, EQ, time setting/Mute
- AMS/BND – Automatic channel search, F1-F2-F3/A1-A2 switching
- AUX input (3.5 mm stereo jack)
- USB output – 5V 2.1A for phone charging
- USB input – to play music from storage
- IR sensor – remote control
- + – buttons to increase or decrease volume and other values
OPERATION
On/Off (2. Button)
Press briefly to switch on, long press to switch off the device
FM band switching, automatic search and storage keys, answer (7. Button)
Radio mode pressing multiple times switches between bands FM1, FM2,
FM3,/A1-A2. Hold down to start automatic station search and storing, these
stored stations can be switched to with the 4-5 channel selector buttons. When
a Bluetooth connection is active, press briefly to answer the call during a
phone call.
Searching for a radio/jumping to a media file back and forth (buttons 4.
and 5.)
In radio mode, press briefly to switch between stored-program positions. Press
and hold to switch to manual search. In media player mode, switch to the next
or previous media file.
SETTINGS
To set the time:
Touch and hold 6 (Play pause), then touch and hold repeatedly until CLOCK
appears on the display. After “CLOCK” appears, touch again, but max. For 1
second so that the 2 digits of the clock unit start flashing. You can increase
or decrease the value by tapping the + and – buttons. To switch to the minute
unit, briefly press the 6 (Play pause) button, then set the minute in the same
way as for the clock unit.
To set a sound profile:
Touch and hold button 6 and set (+ -) the desired values. You can switch
between the BASS-TREB-BAL-FAD settings by pressing and holding the 6 buttons.
Gesture control:
Swipe your hand from left to right or right to left up to 10 cm in front of
the head unit to switch in the desired direction.
Suitable for switching between radio channels or between songs.
Voice control:
Touch the button to give instructions to the head unit so it does not distract
you from safe driving.
Keywords:
It depends on the type and settings of the mobile device. This function can
only be used if the device has a voice control function.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>