Dongguan Green Power One BSCS5 Mobile Phone charging stand Instruction Manual
- June 6, 2024
- Dongguan Green Power One
Table of Contents
Dongguan Green Power One BSCS5 Mobile Phone charging stand
Operating instruction
Function Introduction
- “LED①” → provides a working signal indication of the mobile phone charging stand.
- “LED②” → Provide working signal indication of earphone charging stand.
- “Mobile phone Wireless Charging Seat” → Wireless charging function for mobile phone.
- “Wireless Charging Seat for Headphones” → Wireless charging function for headphones.
- “Power-dc” → Provide DC power input.
Functional instructions
-
Connect the charger and wiring to the “power-DC” interface to charge the wireless device of the mobile phone headset When the power is plugged in, the “indicator” flashes twice, and then the
“indicator” flashes once to enter the normal state. When the mobile phone is placed in the position of “mobile phone wireless charging seat”, it can charge the mobile phone wirelessly normally and the “indicator light” will always be on. When the “mobile phone wireless charging seat” has metal foreign matter on its surface, the “indicator light” will automatically flash continuously and immediately stop charging the mobile phone wirelessly. -
When the earphone is hung on the “earphone wireless charging stand”, the earphone can be normally charged wirelessly, and the “indicator light” is always on. When the “earphone wireless charging stand” is stained with metal foreign matter, the earphone wireless charging stand can be charged wirelessly.
Note: The charger needs QC2.0 or above, and the data cable needs 2A current.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party. Responsible for compliance could void the user’s
authority to operate this equipment. (Example- use only shielded interface
cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.