DANLEY PGJ94 Speaker Box Owner’s Manual
- October 27, 2023
- DANLEY
Table of Contents
DANLEY PGJ94 Speaker Box
INSTRUCTION
The instructions apply to Danley-powered units.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- The power plug at the wall must remain accessible to be able to disconnect power from the apparatus.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- This apparatus shall not be exposed to dripping or splashing, and no object filled with liquid, such as vases, shall be placed on the apparatus.
- This apparatus has been designed with Class-I construction and must be connected to a main socket outlet with a protective grounding connection (the third grounding prong).
- If the loudspeaker is exposed to changes in temperature and humidity, internal condensation may develop. If powered up with such condensation, electronic failure could result. When exposed to environmental changes, allow the loudspeaker at least 30 minutes to acclimate to a new temperature before connecting to the ac mains and operating.
- Danley Sound Labs loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure is needed to cause such damage. Avoid prolonged exposure to the high sound levels from the loudspeaker.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT EXPOSE THE APPARATUS TO DRIPPING OR
SPLASHING AND DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS DRINKS, ON THE
APPARATUS.
CAUTION: This product is energized as long as it is connected to the AC
mains supply.
CAUTION: Allow at least six inches of free space all around the amplifier
heat sink for sufficient ventilation.
Your New Loudspeaker
Unpacking
For most of the Danley Sound Labs products we recommend that it be unpacked by
two or more people. Refer to the spec sheet for product weight. Remove tape
and open top flaps. Lay the box on its side and slide the loudspeaker out.
Remove the packaging wrap.
Inspection
Check to make sure the product is not missing hardware of any kind. If any
brackets or additional accessory hardware is missing, please don’t hesitate to
contact Danley Sound Labs.
Shipping Damage
If your Loudspeaker appears to have been damaged in shipping, please take
clear photographs and contact the carrier immediately.
Understanding the Difference
THE JERICHO HORN
The Jericho loudspeakers are intended for use in long throw applications where
SPL levels are required to exceed 100 dB. With over 30 years of loudspeaker
design, Tom Danley applies the best of his knowledge in creating something
once thought to be impossible. A single reference quality source capable of
reaching 150 dB at one meter. The driver alignment is configured to allow for
smooth summation across the full range of frequencies. All Jericho
loudspeakers exhibit the ability to keep the sound where you point it due to
unique horn-loading configurations. This is key in providing clear, uncolored
sound in reverberant spaces and covering large areas with consistent coverage
throughout the listening plane; all while using far fewer loudspeakers. When
you need it loud and clear, the Danley Jericho is the best choice on the
market.
Initial Set Up
What Size Amplifier to Use
Selecting the right amplifier for your loudspeaker depends on a variety of
factors and uses. The owner is ultimately responsible for choosing the best
amplifier or amplifiers for the application. We recommend choosing an amp that
is rated between the continuous and program ratings. Please note “Continuous”
does not mean “forever”! Most loudspeaker manufactures, including Danley Sound
Labs, subscribe to the AES standards for loudspeaker power ratings.
Connecting to the Jericho
Your Danley loudspeaker has 1 NL8 (“speak-on”) connector located on a panel on
the rear of the box. The J series loudspeakers are wired as quad amp.
Pinout: Quad-Amped
- 1+ Positive LF
- 1 – Negative LF
- 2+ Positive LF
- 2 – Negative LF
- 3+ Positive Mid
- 3 – Negative Mid
- 4+ Positive High
- 4 – Negative High
Rigging
Safety Precautions
Before attempting to rig or suspend your Danley speakers, read and understand
the following safety information.
IMPORTANT RIGGING SAFETY WARNING!
The information in this section has been assembled from recognized engineering
data and is intended for informational purposes only. None of the information
in this section should be used without first obtaining competent advice with
respect to applicability to a given circumstance. None of the information
presented herein is intended as a representation or warranty on the part of
Danley Sound Labs. Anyone making use of this information assumes all liability
arising from such use.
All information presented herein is based upon materials and practices common
to North America and may not directly apply to other countries because of
differing material dimensions, specifications, and/or local regulations. Users
in other countries should consult with appropriate engineering and regulatory
authorities for specific guidelines.
Correct use of all hardware is required for secure system suspension. Careful
calculations should always be performed to ensure that all components are used
within their rated workload before the array is suspended. Never exceed
maximum recommended load ratings.
Before suspending any speaker system always inspect all components (enclosure,
rigging frames, pins, etc.) for cracks, deformations, corrosion, missing,
loose or damaged parts that could reduce strength and safety of the array. Do
not suspend the speaker until the proper corrective action has been taken. Use
only load-rated hardware when suspending Danley loudspeakers.
Are You New to Rigging?
If you are new to rigging, you should do the following:
Know the Rules for Safe Rigging.
- Attend a safe rigging seminar, such as that presented by professionals like Rigging Seminars or by Chain Motor Hoist manufacturers like Columbus McKinnon Corp. (manufacturers of the C/M Lodestar).
- Meet and establish a relationship with a licensed mechanical or structural engineer. Get in the habit of asking them questions instead of guessing about their answers. Learn from what they tell you.
- Meet and discuss this aspect of your business with your Insurance Agent.
- Research and understand the codes, practices, and requirements in the venues where you intend to operate your sound system.
General Hardware Information
All Danley loudspeakers which are intended to be flown are provided with ⅜
inch – 16 hardware. Any hardware used in an overhead suspension application
must be load rated for the intended use. Generally, this type of hardware is
available only from rigging supply houses; industrial supply catalogs and
specialized rigging distributors. Local hardware stores do not usually stock
these products.
Attachment to Structures
A licensed Professional Engineer must approve placement and method of
attachment to structures prior to installation of any overhead object. The
following performance standards should be provided to the Professional
Engineer for design purposes: Uniform Building Code as applicable, Municipal
Building Code as applicable, Seismic Code as applicable. Installation of
hardware and method of attachment must be carried out in the manner specified
by the Professional Engineer. Improper installation may result in damage,
injury or death.
Rigging Hardware Inspection & Maintenance
Suspension systems are comprised of mechanical devices and, as such, they
require regular inspection and routine maintenance to insure proper function
ability. Danley loudspeakers must be inspected for fatigue at least annually.
The inspection shall include a visual survey of all corners and load bearing
surfaces for signs of cracking, water damage, de-lamination, or any other
condition that may decrease the strength of the loudspeaker enclosure.
Accessory rigging hardware provided with or for Danley loudspeakers must be
inspected for fatigue at least annually. The inspection shall include a visual
material survey for signs of corrosion, bending or any other condition that
may decrease strength of the fastener. For other fittings used, refer to the
manufacturer’s inspection and maintenance guidelines for process. Danley Sound
Labs is not responsible for the application of its products for any purpose or
the misuse of this information for any purpose. Furthermore, Danley Sound Labs
is not responsible for the abuse of its products caused by avoiding compliance
with inspection and maintenance procedures or any other abuse. Prior to
suspending the system, an expert, trained and experienced in flying
loudspeaker systems should inspect all rigging parts and components.
Operation
Acoustic Level Warning
Danley Sound Labs loudspeakers can produce sound levels capable of causing
permanent hearing damage from prolonged exposure. The higher the sound level,
the less exposure needed to cause such damage. Avoid prolonged exposure to the
high sound levels from the loudspeaker. Some Jericho horns are capable of
levels in excess of 150 dBSPL! Levels this high can cause permanent hearing
loss! When operating at these high sound pressure levels the user is strongly
encourages to use hearing protection. Danley Sound Labs accepts no liability
for hearing damage from using our loudspeakers!
Operator Responsibility
It is the responsibility of the operator to maintain safe operating levels and
to insure that the audience is not harmed by excessive levels. This is a chart
of the recommended exposure limits set by OSHA.
Aqua Tight Coating
Aqua Tight Coating includes full two layer fiberglass finish for maximum
moisture resistance as well as a special polyurea coat bonded to the
fiberglass exterior & two topcoat layers of UV resistant color stabilizer. It
also includes all stainless steel exterior fasteners, an acoustically
transparent moisture barrier to the grille, waterproofing the driver cones and
sealant for the input plate, handles or cabinet fixtures. The finish also
includes a powder coated stainless steel grille, sealed, waterproof cable
leads (12’ length standard), and fully caulked all external joints (except for
the “weep” opening at the bottom of the grille). If a repair is to be made on
a loudspeaker with “AT” finish, a few steps must be taken to insure the
speaker remains water resistant in future usage. The caulking must be removed
to free the grill and driver access panels. Once the repair is finalized, the
bolts must be coated with silicon and the caulk must be replaced on all panels
that have been removed.
Warranty on Danley Commercial Audio Products
Danley offers the following Warranty which covers product directly purchased
from dealers in the 50 US States and Canada and only applies when product has
been installed and operated under normally accepted standards. Warranty Covers
Product Against Defects in Material or Workmanship for 5 Years. The warranty
period starts on the date of purchase from an authorized Danley dealer.
Coverage: Danley will repair or replace the product and or defective portion
of said product by this warranty if it becomes defective, malfunctions or
otherwise fails to perform under normal use and service during the term of
this warranty without charge for labor or materials. Repairs may be performed
using new or refurbished parts that meet or exceed Danley specifications for
new parts. If Danley elects to replace the product, the replacement may be a
reconditioned unit. Buyer will be responsible for any removal or
reinstallation charges and for any shipping charges if the product must be
shipped for warranty service. However, Danley will pay the return shipping
charges provided the destination is with the warranted area. This warranty
does not cover damage, deterioration (due to corrosive environment) or
malfunction resulting from accident, negligence, misuse, abuse, improper
installation or operation, repair or attempted repair by someone other than an
authorized Danley service tech, any product with altered serial number, damage
due to power line surge or related electrical abnormalities, improper
grounding, lightning damage or acts of God, damage during shipment (claims
must be presented to the carrier). This warranty only covers original end‐user
purchaser.
To Obtain Warranty Service: please contact your authorized dealer or sound
contractor for instructions for warranty claims or contact Danley directly at
info@danleysoundlabs.com. Product requiring
shipping should be packed securely and include explanation of problem along
with a copy of original bill of sale. No products shipped will be accepted
unless prepaid or prior agreement with Danley has been arranged. All returns
must be accompanied by a Return Authorization Number. If any returned product
is found ineligible, the cost of repairs will be forwarded to owner and
product repaired and returned to buyer upon payment received by Danley.
Contact Information
Danley products are represented & sold through a network of key
representatives & approved dealers in the US/Canada/ & Mexico. International
sales and service are handled through our corporate office.
Danley Sound Labs – Corporate Office
- 2196 Hilton Drive, Suite G,
- Gainesville, GA. 30501
- Phone (770)535‐0204 or (877)419‐5805
- Fax (678)928‐4010
- Email: info@danleysoundlabs.com