DANLEY Outdoor Series Loudspeakers Owner’s Manual
- October 27, 2023
- DANLEY
Table of Contents
DANLEY Outdoor Series Loudspeakers
The instructions on this page apply to Danley-powered units.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- The power plug at the wall must remain accessible to be able to disconnect power from the apparatus.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- This apparatus shall not be exposed to dripping or splashing, and no object filled with liquid, such as vases, shall be placed on the apparatus.
- This apparatus has been designed with Class-I construction and must be connected to a mains socket outlet with a protective grounding connection (the third grounding prong).
- If the loudspeaker is exposed to changes in temperature and humidity, internal condensation may develop. If powered up with such condensation, electronic failure could result. When exposed to environmental changes, allow the loudspeaker at least 30 minutes to acclimate to a new temperature before connecting to the ac mains and operating.
- Danley Sound Labs loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure is needed to cause such damage. Avoid prolonged exposure to the high sound levels from the loudspeaker.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. DO NOT EXPOSE THE APPARATUS TO DRIPPING OR SPLASHING AND DO
NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS DRINKS, ON THE APPARATUS.
CAUTION:
- This product is energized as long as it is connected to the AC main supply.
- Allow at least six inches of free space all around the amplifier heat sink for sufficient ventilation.
Your New Loudspeaker
Unpacking
For most of the Danley Sound Labs products, we recommend that it be unpacked by two or more people. Refer to the spec sheet for product weight. Remove tape and open top flaps. Lay the box on its side and slide the loudspeaker out. Remove the packaging wrap.
Inspection
Check to make sure the product is not missing hardware of any kind. If any
brackets or additional accessory hardware is missing, please don’t hesitate to
contact Danley Sound Labs.
Shipping Damage
If your Loudspeaker appears to have been damaged in shipping, please take
clear photographs and contact the carrier immediately.
Understanding the Difference
THE OUTDOOR SERIES
The Outdoor Series is Danley’s answer for those that are looking for a
high-performance speaker in an outdoor enclosure impervious to weather. A
single cabinet can produce high-quality audio beyond 130dB. A heavy-duty
aluminum mounting bracket and angle strap is included. APPLICATIONS can
include any outdoor location such as sports venues, arenas, athletic fields
and complexes, theme and recreational parks, public gatherings, race tracks,
community centers, cruise ships, hockey rinks, electronic carillons, water
parks, and swimming areas.
Initial Set Up
What Size Amplifier to Use
Selecting the right amplifier for your loudspeaker depends on a variety of
factors and uses. The owner is ultimately responsible for choosing the best
amplifier or amplifier for the application. We recommend choosing an amp that
is rated between the continuous and program ratings. Please note “Continuous”
does not mean “forever”! Most loudspeaker manufacturers, including Danley
Sound Labs, subscribe to the AES standards for loudspeaker power ratings.
Connecting to the OS
Your Danley loudspeaker has two NL4 (“speak-on”) connectors located on a
panel on the rear of the box. The OS series loudspeaker is wired as passive.
The two NL4 connectors are wired parallel.
Pinout: Passive
- 1+ Positive Full Range
- 1 – Negative Full Range
- 2+ Pass Through
- 2 – Pass Through
Rigging
If you have to ask how you probably shouldn’t be doing it!
Safety Precautions
Before attempting to rig or suspend your Danley speakers, read and understand the following safety information.
IMPORTANT RIGGING SAFETY WARNING!
The information in this section has been assembled from recognized engineering
data and is intended for informational purposes only. None of the information
in this section should be used without first obtaining competent advice with
respect to applicability to a given circumstance. None of the information
presented herein is intended as a representation or warranty on the part of
Danley Sound Labs. Anyone making use of this information assumes all liability
arising from such use.
All information presented herein is based upon materials and practices common
to North America and may not directly apply to other countries because of
different material dimensions, specifications, and/or local regulations. Users
in other countries should consult with appropriate engineering and regulatory
authorities for specific guidelines.
Correct use of all hardware is required for security system suspension.
Careful calculations should always be performed to ensure that all components
are used within their rated workload before the array is suspended. Never
exceed the maximum recommended load ratings.
Before suspending any speaker system always inspect all components (enclosure, rigging frames, pins, etc.) for cracks, deformations, corrosion, and missing, loose or damaged parts that could reduce the strength and safety of the array. Do not suspend the speaker until the proper corrective action has been taken. Use only load-rated hardware when suspending Danley loudspeakers.
Are You New to Rigging?
If you are new to rigging, you should do the following:
Know the Rules for Safe Rigging
Attend a safe rigging seminar, such as that presented by professionals like
Rigging Seminars or by Chain Motor Hoist manufacturers like Columbus McKinnon
Corp. (manufacturers of the C/M Lodestar). Meet and establish a relationship
with a licensed mechanical or structural engineer. Get in the habit of asking
them questions instead of guessing about their answers. Learn from what they
tell you.
Meet and discuss this aspect of your business with your Insurance Agent
- Research and understand the codes, practices, and requirements in the venues where you intend to operate your sound system.
General Hardware Information
All Danley loudspeakers which are intended to be flown are provided with ⅜
inch – 16 hardware. Any hardware used in an overhead suspension application
must be load rated for the intended use. Generally, this type of hardware is
available only from rigging supply houses; industrial supply catalogs, and
specialized rigging distributors. Local hardware stores do not usually stock
these products.
Attachment to Structures
A licensed Professional Engineer must approve placement and method of
attachment to structures prior to installation of any overhead object. The
following performance standards should be provided to the Professional
Engineer for design purposes: Uniform Building Code as applicable, Municipal
Building Code as applicable, and Seismic Code as applicable. Installation of
hardware and method of attachment must be carried out in the manner specified
by the Professional Engineer. Improper installation may result in damage,
injury, or death.
Rigging Hardware Inspection & Maintenance
Suspension systems are comprised of mechanical devices and, as such, they require regular inspection and routine maintenance to ensure proper function ability. Danley loudspeakers must be inspected for fatigue at least annually. The inspection shall include a visual survey of all corners and load-bearing surfaces for signs of cracking, water damage, de-lamination, or any other condition that may decrease the strength of the loudspeaker enclosure. Accessory rigging hardware provided with or for Danley loudspeakers must be inspected for fatigue at least annually. The inspection shall include a visual material survey for signs of corrosion, bending, or any other condition that may decrease the strength of the fastener. For other fittings used, refer to the manufacturer’s inspection and maintenance guidelines for the process.
Danley Sound Labs is not responsible for the application of its products for any purpose or the misuse of this information for any purpose. Furthermore, Danley Sound Labs is not responsible for the abuse of its products caused by avoiding compliance with inspection and maintenance procedures or any other abuse. Prior to suspending the system, an expert, trained and experienced in flying loudspeaker systems should inspect all rigging parts and components.
Operation
Acoustic Level Warning
Danley Sound Labs loudspeakers can produce sound levels capable of causing
permanent hearing damage from prolonged exposure. The higher the sound level,
the less exposure is needed to cause such damage. Avoid prolonged exposure to
the high sound levels from the loudspeaker. Some OS speakers are capable of
levels in excess of 130 dBSPL! Levels this high can cause permanent hearing
loss! When operating at these high sound pressure levels the user is strongly
encouraged to use hearing protection. Danley Sound Labs accepts no liability
for hearing damage from using our loudspeakers!
Operator Responsibility
It is the responsibility of the operator to maintain safe operating levels
and to ensure that the audience is not harmed by excessive levels. This is a
chart of the recommended exposure limits set by OSHA.
Warranty on Danley Commercial Audio Products
Danley offers the following Warranty which covers products directly purchased from dealers in the 50 US States and Canada and only applies when a product has been installed and operated under normally accepted standards. Warranty Covers Product Against Defects in Material or Workmanship for 5 Years. The warranty period starts on the date of purchase from an authorized Danley dealer.
Coverage:
Danley will repair or replace the product and or defective portion of said
product by this warranty if it becomes defective, malfunctions or otherwise
fails to perform under normal use and service during the term of this warranty
without charge for labor or materials. Repairs may be performed using new or
refurbished parts that meet or exceed Danley’s specifications for new parts.
If Danley elects to replace the product, the replacement may be a
reconditioned unit. Buyer will be responsible for any removal or
reinstallation charges and for any shipping charges if the product must be
shipped for warranty service.
However, Danley will pay the return shipping charges provided the destination is within the warranted area. This warranty does not cover damage, deterioration (due to corrosive environment), or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation, repair or attempted repair by someone other than an authorized Danley service tech, any product with altered serial number, damage due to power line surge or related electrical abnormalities, improper grounding, lightning damage or acts of God, damage during shipment (claims must be presented to the carrier). This warranty only covers the original end‐user purchaser.
To Obtain Warranty Service:
please contact your authorized dealer or sound contractor for instructions for
warranty claims or contact Danley directly at
info@danleysoundlabs.com. The product
requiring shipping should be packed securely and include an explanation of the
problem along with a copy of the original bill of sale. No products shipped
will be accepted unless prepaid or a prior agreement with Danley has been
arranged. All returns must be accompanied by a Return Authorization Number. If
any returned product is found ineligible, the cost of repairs will be
forwarded to the owner, and the product repaired and returned to the buyer
upon payment received by Danley.
Contact Information
Danley products are represented & sold through a network of key
representatives & approved dealers in the US/Canada/ & Mexico. International
sales and service are handled through our corporate office.
Danley Sound Labs – Corporate Office
2196 Hilton Drive, Suite G, Gainesville, GA. 30501
Phone (770)535‐0204 or (877)419‐5805
Fax (678)928‐4010
Email: info@danleysoundlabs.com.
www.danleysoundlabs.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>