DANLEY OS80 Pole Mount Kit Instructions
- October 27, 2023
- DANLEY
Table of Contents
DANLEY OS80 Pole Mount Kit
Thank you for purchasing the OS80 Pole Mount Kit. The kit should include the following:
- 2 x Pole Mount Stainless Steel Banding
- 2 x BCLAMP Banding Tensioner
- 1 x PM-G-6+ Mounting Arm 1 x 1/2” by 3” Long Bolt
- 2 x 1/2” Washer
- 1 x 1/2” Lock Washer
PMK2 (Additional items)
- 1 x CB-G-48 Extension Arm
- 2 x 1/2” by 3” Long Bolt
- 1 x 1/2” by 5.5” Long Bolt
- 3 x 1/2” Lock Washer
- 6 x 1/2” Washer
Compatible Pole Dimensions
-
Max: 24” Diameter
Custom Order required for longer strap lengths. -
Min: 8” Diameter
It is highly recommended that a licensed engineer approves use of this product.
Weight
- PMK-1: 66 lbs 30 kgs
- PMK-2: 126 Ibs 58 kgs
Below is are illustrations of how the bracket attaches to the u-bracket and light pole. The purpose of the kit is to add an adjustable mounting bracket to your loudspeaker and connect it to a standard light pole.
- Slide the steel banding through the slots on the mounting arm, and around the pole.
- Attach the bclamps to the ends of the banding, fold the slack under the clamps (figure 1), and connect the two ends with the 6” bolt and tighten.
- To attach the speaker to the bracket place a bolt with washer through the top of the mounting arm.
- Lift the OS80 and slide the bolt through the ubracket on the speaker.
- Pull the backstrap on the OS80 into place and over the bolt.
- Place a washer, lock washer, and nut on the bolt and tighten.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>