SVEN E-701BT Wireless Stereo Headphones with Microphone User Manual

SVEN E-701BT Wireless Stereo Headphones with Microphone

Congratulations on your purchase of the SVEN stereo headphones!

COPYRIGHT

© SVEN PTE. LTD. Version 2.0 (31.08.2022).
This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted efforts to make this Manual more exact, some discrepancies may occur.
The information in this Manual is given on “as is” terms. The author and the publisher do not bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.

• Check up the package contents and availability of the warranty card. Make sure the warranty
  card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods
  number corresponds to that in the warranty card. Remember: in case of warranty card loss or discrepancy of numbers you forfeit the right for warranty repairs.

• Before installing and using the speaker system, read this Manual carefully and keep it for future reference.
  Shipping and transportation equipment is permitted only in the original container.

• Does not require special conditions for realization.

• Dispose of in accordance with regulations for the disposal of household and computer equipment.

• The date of manufacture of the product is indicated on the box.

APPLICATION

SVEN E-701BT, SVEN E-702BT wireless stereo headphones with microphone are designed for operation with PC, notebookes and other mobile devices by means of data transfer via Bluetooth protocol. They can be also used in internet telephony, during video conferences, in multimedia applications, in interactive games, for speech recognition and foreign language teaching.

PACKAGE CONTENTS

• Wireless stereo headphones set — 1 pc
• USB-A power cord to Type-C — 1 pc
• Charging case — 1 pc
• Additional set of ear tips — 2 pairs
• User Manual — 1 pc
• Warranty card — 1 pc

SAFETY PRECAUTIONS

• Don’t use the stereo headphones while driving.
• Don’t use the stereo headphones at high volume for a long time (more than 15 minutes), as this may cause hearing impairment.

SPECIAL FEATURES

• Bluetooth wireless signal transmission.
• Touch control of incoming calls and track switching.
• Two additional sets of interchangeable ear pads.
• Battery operation time up to 3 hours.
• Operating time using a charging case up to 8–9 hours.

DESCRIPTION

1. Multifunction sensor button.
2. Headphones LED indicator.
3. Charging сase LED indicator.
4. Charging case.
5. TYPE-C jack for battery charging.

CONNECTION

First connection

• Remove both headphones from the charging case, then put them back to the case to activate the headphones.
• If there is a protective film on the contacts, you must remove it before using the headphones.
• The battery in the headphones and case is used as an integral part of the device. Before using for the first time, make sure that the headphones are fully charged. If the headphones are discharged, they need to be fully charged (see headphone charging section).

Headset to a device interfacing

• It is necessary first to interconnect the device with a signal source (see the connection diagram in Fig. 2) to transfer signals via Bluetooth. To pair the headphones with the device, put them to the charging case, then get them out. Both earphones are automatically switched on and connected to each other. At the same time on right earphone LED indicator b will alternate blue and red glow.
• It is necessary to select Bluetooth device search mode on a signal source (telephone, notebook, smartphone, etc.). “SVEN E-701BT” or “SVEN E-702BT” massage will be displayed on the screen, which is to be connected to*.
• If connection successful, there will be a short beep signal in the headphones; the search mode indication on the headphones is over. If no devices connected, headphones will turned off automatically in 2 minutes

Note: When watching streaming video or using a wireless headset in mobile games, the audio track may lag slightly behind the image or action. This is not a malfunction, but is due to the technical capabilities of the source and receiver Bluetooth chips.

Case Headset Charging

• Put the headphones to the charging case. During battery charging indicator b lights red.
  When device is charged full, indicator b is white within 1 minute, then go out.

• The battery in the headphones and case is used as an integral part of the device, therefore do not try to extract or replace it, because this can result in the warranty cancellation or the device damage.

Device switching on

Remove the headphones from the charging case and they will automatically turn on. Make sure the headphones are charged.

Device switching off

Put the headphones to the charging case. They will automatically turn off, or long touch of button a on either headphone disconnects both headphones.

Headphone control

When connected to a telephone:

• In order to receive an incoming call press multifunction button a. Press button a again to finish the call.
• Siri or Google Assistant: touch and hold any of the headphones for 2 seconds**.
• Рlay/pause: tap any of the headphones once.
• Next track: touch any headphones 2 times.
• Previous track: touch any headphones 3 times.
• Reset function: tap button a on two headphones five times at the same time.

You might have to enter “0000” code to connect some models of devices via Bluetooth. Availability of this feature depends on your phone.

TECHNICAL SPECIFICATIONS

microphone: -42 ± 3

Frequency range, Hz| headphones: 20–20 000

microphone: 20–20 000

Impedance, Ohm| 16
Membrane, mm| Ø 10
Connection type| Bluetooth
Bluetooth supported profiles| HSP, HFP, A2DP, AVRCP
Radius of operation, m| up to 10
Operation time, h| up to 3
Operation time using a charging case, h| up to 8
Weight, g| 29

Notes. Technical specifications given in this table are supplemental information and cannot give occasion to claims. Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Model: E-717BT, E-727BT
Importer: Tiralana OY, Office 102, Kotolahdentie 15, 48310, Kotka, Finland.
www.sven.fi

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>