SVEN AP-B370MV Wireless Stereo Headphones with Microphone User Manual
- June 3, 2024
- SVEN
Table of Contents
SVEN AP-B370MV Wireless Stereo Headphones with Microphone User Manual
Congratulations on your purchase of the SVEN stereo headphones!
BUYER RECOMMENDATIONS
- Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the delivery agent, if the product carried out the delivery; if the product functions incorrectly, address the dealer at once.
- Shipping and transportation equipment is permitted only in the original container.
- Does not require special conditions for realization.
- Dispose of in accordance with regulations for the disposal of household and computer equipment.
- The date of manufacture of the product is indicated on the box
PACKAGE CONTENTS
- Wireless stereo headphones — 1 pc
- USB power cord to micro USB — 1 pc
- Detachable audio cable Ø 3,5 mm (3 pin) — 1 pc
- User’s Manual — 1 pc
- Warranty card — 1 pc
APPLICATION
SVEN AP-B370MV wireless stereo headphones with microphone are designed for
operation with PC, laptops and other mobile devices by means of data transfer
via Bluetooth protocol.
They can be also used in internet telephony, during video conferences, in
multimedia applications, in interactive games, for speech recognition, foreign
language teaching and FMradio listening and MP3 files via Micro SD.
SAFETY PRECAUTIONS
- Don’t use the stereo headphones while driving.
- Don’t use the stereo headphones at high volume for a long time (more than 15 minutes), as this may cause hearing impairment.
Features
-
Attractive satin finish and lightweight, padded design.
-
5.0 Bluetooth wireless signal transmission.
-
Foldable headband and swivel earcups provide the perfect fit.
-
Wired/wireless audio signal transmission.
-
Earcup controls for track selection, volume and hands-free.
-
Direct MP3/WMA playback (through Micro SD) and FM radio modes.
-
Micro USB jack jack for battery charging.
-
Fully compatible with iOS and Android devices.
Battery operation time up to 10 hours. -
Radius of operation up to 10 m.
DESCRIPTION
- Micro SD card slot.
- ON/OFF button; Рlay/Рause; Call control button.
- Next track (long press); volume up button (short press).
- Previous track (long press); volume down button (short press).
- Switching modes button: Bluetooth/FM/MP.
- Micro USB jack for battery charging.
- Аudio cable jack 3.5 mm (3 pin).
- LED indicator/microphone.
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior to the
headphones application.
Headset charging
- Connect the headphones to a USB port of PC or USB charger using USB/micro USB cable (included). During battery charging the indicator h is white.
- When the device is charged in full, the indicator h goes out.
- After fully charging you should get around 10 hours playtime before you need to recharge the headphones, always try to avoid letting them go totally flat to deter internal battery damage.
- The battery in the headphones is used as an integral part of the device, therefore do not try to extract or replace it, because this can result in the warranty cancellation or the device damage.
Bluetooth mode
- Press and hold the Multi-function button 2, to turn on the headphones and enter Bluetooth pairing mode, this is indicated 8 by flashing LED. Open your device’s Bluetooth mode and search for the pairing name «SVEN AP-B370MV» and select. If your device asks you for a pairing code enter “0000”. Once paired successfully a tone can be heard and the LED indicator 8 on the headphones will flash.
- Use the earcup control buttons (4, 5 and 3) to play, pause or navigate up and down your tracklist. Press button 5 to play and pause the current track, short press button 3 for volume up or button 4 for volume down and long press button 3 for next track or button 4 for previous track.
TF/MP3 mode
With the headphones on insert a compatible TF (micro SD) card in the slot on
the earcup 1 and they will automatically switch to MP3 mode and begin playing
the first compatible track.
Alternatively press the mode button 2 repeatedly until the headphones enter
MP3 mode.
Use the earcup control buttons (4, 5 and 3) to play, pause or navigate up and
down your track list as described above.
FM radio mode
With the headphones on press the mode button 2, repeatedly until you enter FM
mode.
Next press and hold the Mode button 2 again for around 3-4 seconds to begin
the channel scan and store feature. Once completed you can move up and down
the stored stations using the next track 3 and previous track 4 buttons. To
increase or decrease the volume level press and hold buttons 3 and 4 as
described above.
AUX mode
Use the 3.5mm cable provided to connect your headphones to any compatible
audio source. The headphones don’t even need to be switched on, but the track
control and volume buttons wont work and must be controlled at source using
this method.
Device switching on/off
In order to turn on the headphones press and hold the button 2 before you hear
a beep signal. When the device is turned on, the LED indicator 8 will start
blinking. In order to turn off the device, press once more and hold the button
2, before you hear a beep signal.
Headset to a telephone interfacing:
Outgoing calls
- Mobile phone dialing: use your mobile phone to dial normally. After dialing the headset rings, and the voice will be automatically switched to the Bluetooth headset after connecting (Some smartphones have a choice of voice output device.).
- Redial last number: press the button b twice, to dial the last dialed number (Some mobile phones may require a short keystroke only once.).
Answer calls
- In order to receive an incoming call press the button b.
- In order to reset the call, press the button b twice.
- While playing music, when dialing a number or an incoming call, playback will be paused automatically. Music will continue to play after its completion.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit | Value |
---|---|
Membrane, mm | 40 |
Battery mA/h | 350 |
Sensitivity, dB | 110±3 |
Impedance, Ω | 32 |
Connection type | Bluetooth, Micro SD, 3.5mm stereo jack, micro USB |
Bluetooth supported profiles | HSP, HFP, A2DP, AVRCP |
Radius of operation, m | 10 |
Operation time, h | up to 8 |
Dimensions, mm | 190 × 200 × 75 |
Weight, g | 165 |
Notes. Technical specifications given in this table are supplemental information and cannot give occasion to claims. Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.
COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (25.10.2021).
This Manual and information contained in it are copyrighted. All rights
reserved.
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies
may occur. The information in this Manual is given on “as is” terms. The
author and the publisher do not bear any liability to a person or an
organization for loss or damage which has arisen from the information
contained in this Manual.