NutriMill 720430 Nutri Seal Container Vacuum User Manual
- June 6, 2024
- NutriMill
Table of Contents
SMART SEAL™
USER MANUAL
Congratulations
On your new Smart Seal Vacuum Seal™ Canister. Please read through this entire
manual before first use, and keep it for future reference. So that you may
enjoy your new NutriMill® product for years to come.
IMPORTANT SAFEGUARDS
- This Smart Seal™ Vacuum Canister can only be used between 40-100 °F.
- Do not immerse the lid in water or other liquids, it can be cleaned by wet cloth only.
- Keep away from children.
- Store item at a temperature under 120 °F.
- Do not put the Smart Seal™ Vacuum Canister into the oven.
- The Smart Seal™ Vacuum Canister is for home use only.
- Charge every 20 days. If opened frequently, then charge every 10 days.
- When not in use keep fully charged and store in a dry place.
- Do not wash in the dishwasher.
- When disposing of Smart Seal™ Vacuum Canister uses proper recycling methods, the lid should be recycled with batteries.
PARTS INCLUDED
HOW TO USE
Charging
- Connect the magnetic charger to the top of the Vacuum Lid.
- Attach USB end into appropriate USB port.
- The product cannot be used during charging. Light will show red while charging and then flash white when fully charged.
Red: …………….Charging
White: …………..Fully Charged
Flashes White: …….Powering On/Off
Flashes Orange: ……Air Leak
Flashes Red: ………Battery Low, Needs To Be Charged
Flashes White: …….Releasing Air
Slow Flashing White: ..Vacuum Mode
Slow Flashing Blue: …Sealed and Ready to Store
HOW TO USE
Storage
-
Place food to be stored in the Canister. Be sure Lid and Canister are clean of debris for a secure seal, then place the Vacuum Lid on the box.
-
Press the “ON / OFF” button on the lid once to power on.
-
To seal: press the SmartLock™ button down. (Vacuum seal may take up to three minutes). The light will flash while sealing.
-
The indicator light will flash blue when sealed, prompting you to store the item. Three minutes after the indicator begins flashing, the product automatically shuts down and enters low power standby mode. The indicator light will stop flashing.
TIP: Press gently on the lid of the canister as you begin the sealing process. The lid will grip and seal faster.
Store & Open -
The SmartLock™ continuously monitors air pressure & adjusts to compensate for varying air temperatures and pressure, keeping contents fresher longer.
-
To Open: Press the SmartLock™ button to release the vacuum. The lid will remove easily once the pressure has balanced (about 20 seconds).
TROUBLESHOOTING
-
Canister is not sealing after 3 minutes.
a. There is foreign matter on the seal ring or the seal ring is not installed flat, causing air leakage.
b. Remove the sealing ring, clean it and reinstall it. -
The lid still cannot be opened after the release is completed.
a. The vacuum storage bin is under high pressure because of insufficient air intake.
b. Press the SmartLock™ button in and back out. -
Not sealing after pressing the self-locking switch button.
a. The lid has been opened for more than 8 minutes and has automatically shut down.
b. Click the power button to turn back on or connect a charger. -
The lid will not release air and cannot be opened.
a. Power is off and the air release valve cannot work.
b. Click the power button to turn back on or connect the charger.
IDEAS FOR USE
The Smart Seal Canister is the perfect companion for any NutriMill Grain Mill.
Freshly milled flour will stay fresh for longer in the Smart Seal Canister.
The Smart Seal is also the ideal place to store your grains.
Use the canister for anything that tends to go stale quickly: cereal, chips, & bread are a few options.
Store fresh produce from your garden and see how much longer it will last.
Contact us at:
service@lchef.com
with any questions or concerns you
may have with your product.
4196 South 950 East
St. George, Utah 84790
Visit NUTRIMILL.COM to find recipes,
accessories, and so much more!