MIDLAND C1502 Mesh and Bluetooth Conference System User Guide

MIDLAND C1502 Mesh and Bluetooth Conference System

ON/OFF

DESCRIPTION OF BUTTONS

SWITCH ON

SWITCH OFF

PAIRINGS

ATTENTION: To carry out any pairings you need to access Settings. If the Control button is pressed for fewer than 7 seconds, the device will switch itself on instead of accessing Settings. If this occurs, repeat the process.

ACCESS SETTINGS

PHONE, GPS, TFT PAIRING

Note: to pair a 2nd device in mono audio, repeat this procedure using Vol -.

MIDLAND INTERCOM PAIRING

Note: to pair another BT Pro/Pro S intercom, follow the same procedure using the Up button.

OTHER BRAND INTERCOM PAIRING

MESH DYNAMIC REPEAT SECURE PAIRING

RESET BLUETOOTH PAIRINGS

MESH DYNAMIC REPEAT SECURE RESET

EXIT SETTINGS MODE CANCEL PAIRING

OPERATING MODES

• Intercom Mode: to communicate with another device via Mesh or Bluetooth.
• Phone Mode: for phone calls or for managing music.
• FM Radio Mode: to listen to, search for and store radio stations.

Note: Phone mode is only active when there are devices paired to the Vol+/Vol- buttons.

CHOOSE OPERATING MODE

Note: By pressing simultaneously Vol + and Vol – for 1 second, BT Rush communicates the selected operating mode.
Attention: to communicate the participants must be in the same Mesh group and have different IDs. Conference Mesh Group: 10 people in a 1.4 Km bubble.
Mesh Dynamic Repeat Group: 6 people within 3.5 Km.
Mesh Dynamic Repeat Secure Group: 6 people within 3.5 Km with Secure key assigned for private communications.

TABLE 1 – IDS ASSIGNED TO THE VARIOUS GROUPS:

Guest: listening mode only

INTERCOM MODE

The default Mesh Group is set to Dynamic Repeat. For further information consult the online manual (www.midlandeurope.com) or the tutorials on YouTube – Midland World.

MESH IDENTIFICATION CODE (ID) SELECTION

FUNCTION DESCRIPTION

MESH COMMUNICATION ACTIVATION/DEACTIVATION

TO OPEN/CLOSE INTERCOM MANUALLY

Note: to communicate with Rider 1 repeat the process of pressing the Up button.

TO OPEN/CLOSE INTERCOM BY VOICE

Note: Voice activation is only possible with an intercom paired with the down button.

VOX ACTIVATION/DEACTIVATION

SHORTCUT: In Intercom mode pressing Control 2 times activates/deactivates the music.

TO OPEN/CLOSE UNIVERSAL INTERCOM

Note: to activate/deactivate the audio from a different brand device, use the voice call command (for some models it is necessary to send the voice call 2 times)

SWITCHING FROM MESH CONFERENCE TO MESH DYNAMIC REPEAT

SHORTCUT: In Phone/FM Radio modes pressing Control 2 times activates/deactivates Mesh communication.

PHONE MODE

FUNCTION DESCRIPTION

MAKING A CALL

Note: If you have a phone paired with the Vol – button, use the Down button.
SHORTCUT: In Phone/FM Radio modes pressing the Down button 2 times turns the Intercom on/off.

ANSWERING/ENDING A CALL REJECTING A CALL

Note: If you have a phone paired with the Vol – button, use the Down button.

MUSIC

RADIO MODE

FM RADIO

Go to our website www.midlandeurope.com, download the complete manual and the BT Updater software. Customize your intercom with the BTPRO NetApp.
Download it here:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>