BOSCH GDS Professional 18 V-LI HT Cordless Impact Wrench Instruction Manual

BOSCH GDS Professional 18 V-LI HT Cordless Impact Wrench

Safety Instructions

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions, illustrations and specific-tions provided with this power tool. Failure to follow all in- structions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cord-less) power tool.
Work area safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded sur-faces, such as pipes, radiators, ranges and refrigerat-ors. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of elec-tric shock.
• Do not abuse the cord. Never use the cord for carry-ing, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an exten-sion cord suitable for outdoor use. Use of a cord suit-able for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is un-avoidable, use a residual current device (RCD) protec-ted supply. Use of an RCD reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inatten-tion while operating power tools may result in serious per-sonal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal in-juries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or en-ergising power tools that have the switch on invites acci-dents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal in-jury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jew-ellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust ex-traction and collection facilities, ensure these are con-nected and properly used. Use of dust collection can re-duce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe in-jury within a fraction of a second.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was de-signed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or re-move the battery pack, if detachable, from the power tool before making any adjustments, changing ac-cessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for mis-alignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly main-tained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into ac-count the working conditions and the work to be per-formed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

• Recharge only with the charger specified by the manu-facturer. A charger that is suitable for one type of bat-tery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated bat-tery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally oc-curs, flush with water. If liquid contacts eyes, addi-tionally seek medical help. Liquid ejected from the bat-tery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or tool to fire or excess-ive temperature. Exposure to fire or temperature above 130°C may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of bat-tery packs should only be performed by the manufacturer or authorized service providers.

Safety Warnings for Impact Wrenches

• Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use suitable detectors to determine if there are hid-den supply lines or contact the local utility company for assistance. Contact with electric cables can cause fire and electric shock. Damaging gas lines can lead to ex-plosion. Breaking water pipes causes property damage.
• Hold the power tool securely. When tightening and loosening screws be prepared for temporarily high torque reactions.
• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
• Always wait until the power tool has come to a com-plete stop before placing it down. The application tool can jam and cause you to lose control of the power tool.
• In case of damage and improper use of the battery, va-pours may be emitted. The battery can set alight or ex-plode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.
• Do not open the battery. There is a risk of short-circuit-ing.
• The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.
• Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.
• Protect the battery against heat, e.g. against continuous intense sunlight, fire, dirt, water, and moisture. There is a risk of explosion and short-circuiting.
• Application tools can become hot during operation. There is a risk of burns when changing the application tool. Use protective gloves to remove the application tool.
• Caution! When using the power tool with Bluetooth®, a fault may occur in other devices and systems, aero-planes, and medical devices (e.g. pacemakers, hearing aids). Also, damage to people and animals in the immediate vicinity cannot be completely excluded. Do not use the power tool with Bluetooth® in the vicinity of medical devices, petrol stations, chemical plants, areas with a potentially explosive atmosphere, or in blasting areas. Do not use the power tool with Bluetooth® in aircraft. Avoid using the product near your body for extended periods.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Robert Bosch Power Tools GmbH is under license.

Product Description and Specifications

Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire, and/or serious injury.

Please observe the illustrations at the beginning of this operating manual.
Intended Use
The machine is intended for driving in and loosening screws and bolts as well as for tightening and loosening nuts within the respective range of dimensions. With the Bluetooth® Low Energy Module GCY 42 inserted, power tool data and settings can be transferred between the power tool and a mobile device by means of Bluetooth® wire-less technology.
Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.

1. Tool holder
2. Rotational direction switch
3. Bluetooth® Low Energy Module cover GCY 42
4.  Ladder clip
5. Batterya)
6. Battery release buttona)
7. User interface
8. On/off switch
9. Handle (insulated gripping surface)
10. Application tool (e.g. impact socket)a) User interface
11. Status indicator for power tool
12. Mode indicator
13. Worklight button (GDS 18V-1000, GDS 18V-1050 H)
14. Mode button (GDS 18V-1000 C, GDS 18V-1050 HC)
15. Worklight
16. Speed button
17. Speed preselection indicator

• a) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical Data

Cordless Impact Wrench GDS 18V-1000 GDS 18V-1050 H GDS 18V-1000 C GDS 18V-1050 HC

Article number|  | 3 601 JJ8 3..| 3 601 JJ8 5..| 3 601 JJ8 0..| 3 601 JJ8 2..
---|---|---|---|---|---
Rated voltage| V=| 18| 18| 18| 18
Article number|  | 3 601 JJ8 3..| 3 601 JJ8 5..| 3 601 JJ8 0..| 3 601 JJ8 2..
---|---|---|---|---|---
Rated voltage| V=| 18| 18| 18| 18
– Setting 1| min-1| 0–800| 0–800| 0–800| 0–800
– Setting 2| min-1| 0–1200| 0–1200| 0–1300| 0–1300
– Setting 3| min-1| 0–1750| 0–1750| 0–1750| 0–1750
– Setting 1| min-1| 0–1600| 0–1600| 0–1600| 0–1600
---|---|---|---|---|---
– Setting 2| min-1| 0–2400| 0–2400| 0–2300| 0–2300
– Setting 3| min-1| 0–2600| 0–2600| 0–2600| 0–2600
– Setting 1| Nm| 0–350| 0–350| 0–350| 0–350
---|---|---|---|---|---
– Setting 2| Nm| 0–700| 0–750| 0–650| 0–650
– Setting 3| Nm| 0–1000| 0–1050| 0–1000| 0–1050
Max. tightening torqueA)| Nm| 1000| 1050| 1000| 1050
Max. breakaway torqueA)| Nm| 1600| 1700| 1600| 1700
Machine screw diameter| mm| M14–M24| M14–M24| M14–M24| M14–M24
Tool holder|  | ∎ ½”| ∎ ¾”| ∎ ½”| ∎ ¾”
Weight according to

EPTA-Procedure 01:2014B)

| kg| 3.3–4.4| 3.3–4.4| 3.3–4.4| 3.3–4.4
Recommended ambient temperature during charging| °C| 0 to +35| 0 to +35| 0 to +35| 0 to +35

Cordless Impact Wrench GDS 18V-1000 GDS 18V-1050 H GDS 18V-1000 C GDS 18V-1050 HC

Permitted ambient temperat- ure during operation and dur- ing storage| °C| –20 to +50| –20 to +50| –20 to +50| –20 to +50
---|---|---|---|---|---
Compatible rechargeable bat- teries|  | GBA 18V… ProCORE18V…| GBA 18V… ProCORE18V…| GBA 18V… ProCORE18V…| GBA 18V… ProCORE18V…
Recommended batteries for full perfomance|  | ProCORE18V…

≥ 5.5 Ah

| ProCORE18V…

≥ 5.5 Ah

| ProCORE18V…

≥ 5.5 Ah

| ProCORE18V…

≥ 5.5 Ah

Recommended chargers|  | GAL 18… GAX 18… GAL 36…| GAL 18… GAX 18… GAL 36…| GAL 18… GAX 18… GAL 36…| GAL 18… GAX 18… GAL 36…
Bluetooth ®C)|  | –| –| Bluetooth ® 4.1 (Low Energy)| Bluetooth ® 4.1 (Low Energy)
---|---|---|---|---|---
Signal interval| s| –| –| 8| 8
Max. signal rangeD)| m| –| –| 30| 30

• A) Measured at 20−25 °C with rechargeable battery ProCORE18V 8.0Ah.
• B) Measured with GBA 18V 1.5Ah and GBA 18V 12Ah.
• C) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile (GAP).
• D) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be significantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

Noise/Vibration Information

GDS 18V-1000 GDS 18V-1050 H GDS 18V-1000 C GDS 18V-1050 HC

Noise emission values are determined according to EN 62841-2-2. Typically, the A-weighted noise level of the power tool is

Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-2-2:

Impact tightening of fasteners of the maximum capacity of the tool

• The vibration level and noise emission value given in these instructions have been measured in accordance with a standardised measuring procedure and may be used to com-pare power tools. They may also be used for a preliminary estimation of vibration and noise emissions. The stated vibration level and noise emission value repres-ent the main applications of the power tool. However, if the power tool is used for other applications, with different ap-plication tools or is poorly maintained, the vibration level and noise emission value may differ. This may significantly increase the vibration and noise emissions over the total working period. To estimate vibration and noise emissions accurately, the times when the tool is switched off or when it is running but not actually being used should also be taken into account. This may significantly reduce vibration and noise emissions over the total working period. Implement additional safety measures to protect the oper-ator from the effects of vibration, such as servicing the power tool and application tools, keeping their hands warm, and organising workflows correctly.

Assembly

• Remove the battery from the power tool before carry-ing out work on the power tool (e.g. maintenance, changing tool, etc.). The battery should also be re-moved for transport and storage. There is risk of injury from unintentionally pressing the on/off switch.

Charging the Battery

• Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion battery of your power tool.

Note: The battery is supplied partially charged. To ensure full battery capacity, fully charge the battery in the charger before using your power tool for the first time. The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging process does not damage the battery. The lithium-ion battery is protected against deep discharge by the “Electronic Cell Protection (ECP)”. When the battery is discharged, the power tool is switched off by means of a protective circuit: The application tool no longer rotates.

• Do not continue to press the On/Off switch after the power tool has automatically switched off. The battery can be damaged. Follow the instructions on correct disposal.

Removing the Battery

• The battery (5) is equipped with two locking levels to pre-vent the battery from falling out when pushing the battery re-lease button (6) unintentionally. As long as the battery is inserted in the power tool, it is held in position by means of a spring.
• To remove the battery (5), press the release button (6) and pull the battery out of the power tool. Do not use force to do this.

Battery charge indicator

• The green LEDs on the battery charge indicator indicate the state of charge of the battery. For safety reasons, it is only possible to check the state of charge when the power tool is not in operation.
• Press the button for the battery charge indicator  or to show the state of charge. This is also possible when the bat-tery is removed.
• If no LED lights up after pressing the button for the battery charge indicator, then the battery is defective and must be replaced.

Battery model GBA 18V…

Battery model ProCORE18V…

Inserting the Bluetooth® Low Energy Module GCY 42 (Accessory)
Read the corresponding operating instructions for information about the Bluetooth® Low Energy Module GCY 42.
Changing the Tool (see figures A–B)

• Remove the battery from the power tool before carrying out work on the power tool (e.g. maintenance, changing tool, etc.). The battery should also be re-moved for transport and storage. There is a risk of injury from unintentionally pressing the on/off switch.
• When working with an application tool, pay attention that the application tool is connected securely to the tool holder. When the application tool is not securely connected to the tool holder, it can come off during application. Slide the application tool (10) onto the square drive of the tool holder (1).

Operation

Method of Operation
The tool holder (1) (with the application tool) is driven by an electric motor via a gear and impact mechanism. The working procedure is divided into two phases: Screwing in and tightening (impact mechanism in action). The impact mechanism is activated as soon as the screwed connection runs tight and load is therefore put on the motor. The impact mechanism then converts the power of the mo-tor to steady rotary impacts. When loosening screws or nuts, the process is reversed.
Starting Operation

Always place the power tool down on its side and do not lay it on the battery. The power tool can tip over de-pending on the application tool and battery used.

Inserting the battery
Note: The use of batteries unsuitable for your power tool can lead to malfunctions or damage to the power tool. Push the charged battery (5) into the base of the power tool until the battery is securely locked.

Set the rotational direction (see figure E)
The rotational direction switch (2) is used to change the ro-tational direction of the power tool. However, this is not pos-sible while the on/off switch (8) is being pressed.
Right rotation: To drive in screws and tighten nuts, press the rotational direction switch (2) through to the left stop. Left Rotation: To loosen and unscrew screws and nuts, press the rotational direction switch (2) through to the right stop.
Adjusting the Speed/Impact Rate
You can adjust the speed/impact rate of the power tool when it is on by pressing in the on/off switch (8) to varying ex-tents.
Status indications

Applying light pressure to the on/off switch (8) results in a low rotational speed/impact rate. Applying increasing pres-sure to the switch increases the speed/impact rate.
Switching on/off To start the power tool, press and hold the on/off switch (8). The worklight (15) lights up when the on/off switch (8) is lightly or fully pressed, allowing the work area to be illumin-ated in poor lighting conditions. To switch off the power tool, release the on/off switch (8).
User interface (see figures D–E) GDS 18V-1000 C / GDS 18V-1050 HC:
The user interface (7) is used to preselect the speed and working mode and to indicate the status of the power tool.

replace or charge the battery soon
Illuminated red| Power tool has overheated or rechargeable battery is empty| Allow the power tool to cool down, or replace or charge the battery
Flashing blue| Power tool is connected to a mobile device or settings are being transferred| –

Speed preselection
With the speed preselection button (16), you can preselect the required speed in three stages. Press button (16) as of-ten as needed until the required setting is indicated in the speed indicator (17). The selected setting will be saved.
GDS 18V-1000 C / GDS 18V-1050 HC:
You can also preselect the speed using the Bosch Toolbox app. The required speed depends on the material and the work-ing conditions; it can be ascertained through practical tests. The information in the table below describes the recommen-ded values.

You can use the button for speed preselection (16) to preselect the required speed, even during operation.
Switching On the Worklight GDS 18V-1000 / GDS 18V-1050 H:
To switch the worklight (15) on or off, press the worklight button (13).

• Do not look directly into the worklight; it can blind you.
• Selecting the working mode

GDS 18V-1000 C / GDS 18V-1050 HC:
The power tool has two preset working modes A and B (12). You can also programme working modes for different applic-ations and adjust existing modes via the Bosch

Toolbox un-der A and B (12).
To switch between the working modes A and B (12), press button (14).

Practical advice

• Only apply the power tool to the screw/nut when the tool is switched off. Rotating tool inserts can slip off.
• The power tool with inserted Bluetooth® Low Energy Module GCY 42 (accessory) is equipped with a radio interface. Local operating restrictions, e.g. in aircraft or hospitals, must be observed.

The torque depends on the impact duration. The maximum achieved torque results from the sum of all individual torques achieved through impact. Maximum torque is achieved after an impact duration of 6–10 seconds. After this duration, the tightening torque increases only minimally. The impact duration is to be determined for each required tightening torque. The tightening torque actually achieved should always be checked with a torque wrench. Screw applications with hard, spring-loaded or soft seats When the achieved torques in an impact series are measured during a test and transferred into a diagram, the result is the curve of a torque characteristic. The height of the curve cor-responds with the maximum reachable torque, and the steepness indicates the duration in which this is achieved.
A torque gradient depends on the following factors:

• Strength properties of the screws/nuts
• Type of backing (washer, disc spring, seal)
• Strength properties of the material being screwed/bolted together
• Lubrication conditions at the screw/bolt connection The following application cases result accordingly:
• A hard seat is a metal-to-metal screw application which uses washers. After a relatively short impact duration, the maximum torque is reached (steep characteristic curve). Unnecessary long impact duration only causes damage to the machine.
• A spring-loaded seat is also a metal-to-metal screw ap-plication but uses spring washers, disc springs, studs or screws/nuts with conical seats. It is also called a spring-loaded seat when extensions are used.
• A soft seat is a screw application of e.g. metal on wood or a screw application that uses lead washers or fibre wash-ers as backing. For a spring-loaded seat as well as for a soft seat, the max-imum tightening torque is lower than for a hard seat. Also, a clearly longer impact duration is required.

Guide values for maximum screw tightening torques
Figures given in Nm; calculated from the tensional cross-section; utilisation of the yield point: 90% (with friction coefficient µtotal = 0.12). As a control measure, always check the tightening torque with a torque wrench.

according to DIN

267

| 3.6| 4.6| 5.6| 4.8| 6.6| 5.8| 6.8| 6.9| 8.8| 10.9| 12.9
---|---|---|---|---|---|---|---|---|---|---|---
M10| 13| 17.5| 22| 23| 26| 29| 35| 39| 47| 65| 78
M12| 22.6| 30| 37.6| 40| 45| 50| 60| 67| 80| 113| 135
M14| 36| 48| 60| 65| 72| 79| 95| 107| 130| 180| 215
M16| 55| 73| 92| 98| 110| 122| 147| 165| 196| 275| 330
M18| 75| 101| 126| 135| 151| 168| 202| 227| 270| 380| 450
M20| 107| 143| 178| 190| 214| 238| 286| 320| 385| 540| 635
M22| 145| 190| 240| 255| 290| 320| 385| 430| 510| 715| 855
M24| 185| 245| 310| 325| 370| 410| 490| 455| 650| 910| 1100

Tips
Before screwing larger, longer screws into hard materials, it is advisable to pre-drill a pilot hole with the core diameter of the thread to approx. 2/3 of the screw length.
Note: Ensure that no metal particles enter the power tool. After working at a low speed for an extended period, you should operate the power tool at the maximum speed for ap-proximately three minutes without load to cool it down.
Recommendations for optimal handling of the battery Protect the battery against moisture and water.
Only store the battery within a temperature range of -20 to 50 °C. Do not leave the battery in your car in the summer, for example.
A significantly reduced operating time after charging indic-ates that the battery has deteriorated and must be replaced. Follow the instructions on correct disposal.
Ladder clip
You can use the utility clip (4) for hanging the power tool to a ladder, for example. The screw of the ladder clip must be tightened using a tightening torque of approx. 2.0–2.5 Nm.

Control Via App GDS 18V-1000 C / GDS 18V-1050 HC:
The power tool can be fitted with a Bluetooth® module which enables wireless data transfer to certain mobile devices with a Bluetooth® interface (e.g. smartphone, tablet).
In order to control the power tool via Bluetooth®, you will need the “Bosch Toolbox” app. Download the app from the corresponding app store (Apple App Store, Google Play Store). Then select the “My Tools” sub-item in the app. The display of your mobile terminal device will show you all subsequent steps required to connect the power tool to the terminal device. The following functions will be available when a connection has been established with the mobile device:

• Registration and personalisation
• Status check, output of warning messages
• General information and settings
• Management
• Setting the speed levels
• Setting the working modes

EU Declaration of Conformity Cordless Impact Wrench Article number

We declare under our sole responsibility that the stated products comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards. Technical file at:

• GDS 18V-1000

• GDS 18V-1050 H

• GDS 18V-1000 C

• GDS

• 18V-1050 HC

• 3 601 JJ8 3..

• 3 601 JJ8 5..

• 3 601 JJ8 0..

• 3 601 JJ8 2..

• 2006/42/EC

• 2014/30/EU

• 2011/65/EU

• EN 62841-1:2015

• EN 62841-2-2:2014

• EN 55014-1:2017+A11:2020

• EN 55014-2:2015

• EN IEC 63000:2018

• Robert Bosch Power Tools GmbH

• PT/ECS)

• 70538 Stuttgart

• GERMANY

• Henk Becker

• Chairman of

• Executive Management

• Helmut Heinzelmann

• Head of Product Certification

• Robert Bosch Power Tools GmbH, 70538 Stuttgart, GERMANY

• Stuttgart, 15.02.2021

• Robert Bosch Power Tools GmbH
  

• 70538 Stuttgart
  

• GERMANY
  

• www.bosch-pt.com
  

• 1 609 92A 6HV (2021.05) AS / 107

Documents / Resources

| BOSCH GDS Professional 18 V-LI HT Cordless Impact Wrench [pdf] Instruction Manual
GDS Professional, 18 V-LI HT Cordless Impact Wrench, Cordless Impact Wrench, 18 V-LI HT Impact Wrench, Impact Wrench, Wrench
---|---

References

• Invented for life | Bosch Global
• baohanhbosch-pt.com.vn
• Bosch Power Tools | Bosch Power Tools
• Location selection | Bosch Power Tools
• 首页
• Bosch Power Tools | Bosch Power Tools
• Bosch Power Tools | Bosch Power Tools
• Dụng cụ điện cầm tay Bosch | Dụng cụ điện cầm tay Bosch
• Service worldwide
• Contato | Bosch no Brasil

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>