HENDI 207345 Deep Fryer Master Cook Digital User Manual

DEEP FRYER MASTERCOOK
DIGITAL
207345, 207352, 207369, 207376

You should read this user manual carefully before using the appliance.
Keep these instructions with the appliance.
For indoor use only.

Dear Customer,
Thank you for purchasing this Hendi appliance. Read this manual carefully, paying particular attention to the safety regulations outlined below, before installing and using this appliance for the first time.

Safety regulations

• This appliance is intended for commercial use only.
• Only use the appliance for the intended purpose it was designed for as described in this manual.
• The manufacturer is not liable for any damage caused by incorrect operation and improper use.
• Keep the appliance and electrical plug away from water and other liquids. In the event, the appliance falls into water, immediately remove the power plug from the socket. Do not use the appliance until it has been checked by a certified technician. Failure to follow these instructions will cause life-threatening risks.
• Never attempt to open the housing of the appliance by yourself.
• Do not insert objects into the housing of the appliance.
• Do not touch the plug with wet or damp hands.
• The danger of electric shock! Do not attempt to repair the appliance by yourself, repairs are only to be conducted by qualified personnel.
• Never use a damaged appliance! When it’s damaged, disconnect the appliance from the socket and contact the retailer.
• Warning! Do not immerse the electrical parts of the appliance in water or other liquids.
• Never hold the appliance under running water.
• Regularly check the power plug and cord for any damage. When damaged it must be replaced by a service agent or similarly qualified person in order to avoid danger or injury.
• Make sure the cord does not come in contact with sharp or hot objects and keep it away from an open fire. Never pull the power cord to unplug it from the socket, always pull the plug instead.
• Make sure that the power cord and/or extension cord do not cause a trip hazard.
• Never leave the appliance unattended during use.
• Warning! As long as the plug is in the socket the appliance is connected to the power source.
• Turn off the appliance before unplugging it from the socket.
• Connect the power plug to an easily accessible electrical socket so that in case of emergency the appliance can be unplugged immediately.
• Never carry the appliance by the cord.
• Do not use any extra devices that are not supplied together with the appliance.
• Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
• Never use accessories other than those recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.
• This appliance should not be operated by persons with reduced physical, sensory or mental capabilities, or persons that have a lack of experience and knowledge.
• This appliance should, under any circumstances, not be used by children.
• Keep the appliance and its power cord out of reach of children.
• WARNING: ALWAYS switch off the appliance and unplug from the power socket before cleaning, maintenance, or storage.

Special Safety Regulations

• **** Caution! Hot surface! The temperature of the accessible surface is very hot during use. Touch the icons on the control panel only.
• When this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative finishes, etc., it is recommended that they are made of non-combustible material; if not, they shall be cladded with a suitable non-combustible heat insulating material, and that the closest attention be paid to fire prevention regulations.
• Do not place the appliance on a heating object (gasoline, electric, charcoal cooker, etc.). Keep the appliance away from any hot surfaces and open flames. Always operate the appliance on a level, stable, clean, heat-resistant, and dry surface.
• Do not use the appliance near explosive or flammable materials, credit cards, magnetic discs, or radios.
• This appliance is not intended to be operated by means of an external timer or separate remote-control system.
• WARNING: Danger of fire exists if oil level below “L” (Min) marking or no oil in the oil container.
• WARNING: Do not fry too wet foodstuffs and too much food at each time to avoid excessive foaming and spill out of oil. The maximum batch load is approximately 1kg.
• Allow at least 20 cm spacing around the appliance for ventilation purposes during use.
• Only use suitable oil or fat for frying. Replace the oil or fat at regular intervals. Overcooked or dirty oil or fat can be ignited if it is overheated.
• Do not use plastic cutlery during operation.
• Danger! Never use old oil, old oil has a reduced flash point and is more prone to surge boiling which increases the risk of fire and dangerous situations.
• Warning! Deep frying moist foods and large quantities at once have a negative influence on the boiling point of the oil.
• Always clean the appliance and other accessories after each use (–>Cleaning and maintenance).
• Do not use a water jet, flush directly with water or steam cleaner as the parts will get wet and electric shock might result.
• Caution! Securely route the power cord if necessary in order to prevent unintentional pulling or contact with the heating surface.
• Do not wash the appliance with water. Washing can cause leakages and increase the risk of electric shock.
• Do not clean or store the appliance unless it is completely cooled down.
• No part is dishwasher safe.
• Always remove the plug from the socket when filling or cleaning the deep fryer.
• The electrical installation must satisfy the applicable national and local regulations.
• The Fryer tank and element should be placed in a safe position in your kitchen before usage due to the hot contents when in use.

Intended use

• This appliance is intended for professional use and can be operated only by qualified personnel.
• The appliance is designed only for frying appropriate food only such as French fries, etc. Any other use may lead to damage of the appliance or personal injury.
• Operating the appliance for any other purpose shall be deemed a misuse of the device. The user shall be solely liable for improper use of the device.

Grounding installation
This appliance is classified as protection class I and must be connected to protective ground.
Grounding reduces the risk of electric shock by providing an escape wire for the electric current.
This appliance is fitted with a power cord that has a grounding wire and grounded plug. The plug must be plugged into an outlet that is properly installed and grounded.
Preparations before using for the first time

• Check to make sure the appliance is undamaged. In case of any damage, contact your supplier immediately and do NOT use the appliance.
• Remove all the packing material and protection film (if applicable).
• Clean the appliance with lukewarm water and a soft cloth.
• Place the appliance on a level and steady surface, unless mentioned otherwise.
• Make sure there is enough clearance around the appliance for ventilation purposes.
• Position the appliance in such a way that the plug is accessible at all times.
• Keep the packaging for storing your appliance when not in use for an extended period of time.

Installation

• Place the appliance on a level, stable, clean, heat-resistant, and dry surface with its rubber feet.
• Carefully install the back support with the heating element on the rear edge of the oil container.

NOTE:

1. Make sure that the pin on the back support is in the correct position & properly mounted.
2. The appliance should be placed in a safe position in your kitchen before use due to hot hazards when in use.

Main parts of the appliance

1. Control panel
2. Detachable back support with the heating element
3. Base unit with oil container
4. RESET button (At the rear and bottom of the back support)
5. Lid cover
6. Oil drain tap (Supplied for item 207369 and 207376 only)
7. Feet
8. Frying basket with handle
9. Frying basket holder

Function keys on the control panel

A) ON/OFF switch
B) Increase icon (To increase the temperature & timer setting)
C) TEMPERATURE icon
D) Upper display
E) Lower display
F) TIMER icon
G) Decrease icon (To decrease the temperature & timer setting)

Use

• Make sure the oil drain tap is closed.
• Remove the plug from the socket.
• Make sure the oil container is clean and dry and no water inside.
• Carefully fill the container with oil between the “L” marking (Min) and the “H” marking (Max).
• Plug the earthed plug into an earthed socket.
• You can now use the deep fryer.

Deep-frying
The deep fryer is designed with a unique cold zone to allow crumbs and residue to sink to the bottom this also enables the usable life of the fat/oil to extend considerably.
Regularly check if there is sufficient oil or fat in the container. The level should never be below the “L” marking (Min) line.

Operation

1. Setting the TEMPERATURE

1. Fill the container with oil and make sure that the oil level is between the “L” and “H” marks.
   Note: Remember that placing food in the oil will also raise the oil level. Do not put too wet foodstuffs or large amounts of food at each time.

2. Connect the power plug to a suitable electrical power outlet.

3. Press the ON/OFF Icon & light up. The INCREASE / DECREASE icon will blink. The upper display will show the current SET TEMPERATURE. (TEMPERATURE range: 25°C ~ 195°C).

4. Press the INCREASE or DECREASE icon to start the heating operation. The upper display will show the ACTUAL  TEMPERATURE of the oil. And the TEMPERATURE icon will blink constantly.

5. You can also press the TEMPERATURE icon to see the last SET TEMPERATURE for 2 seconds. Within this period, press the INCREASE or DECREASE icon to adjust the SET TEMPERATURE if needed.Press INCREASE / DECREASE icon once for +1,0°C / – 1,0°C. Press & hold for fast adjustment. After stopping pressing for about 3 seconds, the new SET TEMPERATURE will be stored automatically.

6. Under heating operation, the TEMPERSTURE icon will blink constantly until the SET TEMPERATURE is reached. After reaching the SET TEMPERATURE, the TEMPERATURE icon light will go off and keep within a range of ± 2°C.

7. When switching off the appliance, “of” will be shown on the upper display and “Hot” will be shown on the lower display.

2. Setting the TIMER

1. During operation, you can activate the TIMER function.
2. Press and hold the TIMER button for 3 seconds to enter TIMER set mode. The INCREASE/DECREASE icon will blink.
3. Then, within 2 seconds, press the INCREASE or DECREASE icon to set the TIMER. Press once for +30 seconds / -30 seconds and the lower display will show the set countdown time for TIMER. Press and hold the INCREASE or DECREASE icon for fast adjustment (TIMER Range: 30 seconds ~ 20 mins).
4. The newly set TIMER will be stored and start countdown within about 3 seconds.
5. When count down is finished, “End” will be blinked continuously on the lower display. Two short beep sounds will be heard with about 10 seconds duration for over a period of 1 minute.
6. Press the TIMER button once to return to the last preset time. Press again the TIMER button to enter TIMER set mode for changing the time. The INCREASE/DECREASE icon will blink. The newly set TIMER will be stored and start the countdown again within about 3 seconds.
7. During count down, press and hold the TIMER icon for 3 seconds to cancel counting mode. “oFF” will be shown on the lower display.

ATTENTION: The frying basket holder is just for temporarily holding for excess oil discharge only. Do not hold too long time to prevent from falling down accidentally and spilling out of heated oil.

Calibration function
This function allows the user to calibrate and adjust the “display temperature” to align with the “actual temperature”. A calibrated thermometer with the probe is required (not included) for measurement.

• During operation, press and hold both the INCREASE and DECREASE buttons for 6 seconds to enter “calibration mode”.

• Then, the “display temperature” shown on the display will blink constantly.

• Next, put the thermometer (not included) inside the oil tank for comparison. Be careful as the oil is hot.

• When under a steady situation, press the INCREASE or DECREASE button to align the “display temperature” with the reading in the thermometer (not included).

• After that, press the TEMPERATURE icon to confirm it after finishing calibration.

RESET the Hi-limiter (thermal cut-out)

Please note that the RESET button is located at the bottom of the detachable back support with a protective cap (See line drawing to avoid overheating).

• Unplug the deep fryer from the electrical outlet first.
• Allow the deep fryer to completely cool down.
• Remove the detachable back support from the support.
• Unscrew the black protective cap of the RESET button.
• Press the RESET button of the Hi-limiter (thermal cut-out). You should hear a click sound.
• Screw back the protective cap on the RESET button.
• Reinstall the detachable back support on the support.

Deep frying tips

• Only use liquid frying oil (preferably) or fat.
• The recommended temperature for frying chips and snacks is 175°C max.
• Heat the oil slowly. Preferably in 3 steps for example first at 100°C, then from 100-140°C, and later from 140°C to 175°C with 15-minute breaks between steps.
• Remove ice and crumbs from frozen foods.
• Do not deep-fry too much at one time. This can cause the oil or fat to cool down too much. Cooled-down oil/fat does not properly sear the surface of the food so that more fat will be absorbed. The ideal proportion of frozen products to frying oil/ fat is 1:10 maximum.
• When used intensively, crumbs and other debris should be filtered out of the oil/fat.
• Replace oil or fat in time. Use test strips or test equipment regularly to track when oil/fat should be replaced.
• If oil or fat starts to foam, smoke or get too viscous you should replace it. Also, replace the oil/fat when it has a strong smell or taste.

After use

• Turn off the appliance by pressing the ON/OFF icon and removing the plug from the socket.
• Remove the basket from the oil container. This avoids the basket becoming stuck in the solidified fat.
• Put the lid on the deep fryer, so that the fat does not age.

Cleaning and maintenance

• Always remove the plug from the socket cool down completely before cleaning the appliance.
• Beware: Never immerse the appliance in water or any other liquid!
• Clean the outside of the appliance with a damp cloth (water with mild detergent).
• Never use aggressive cleaning agents or abrasives. Do not use any sharp or pointed objects. Do not use petrol or solvents! Clean with a damp cloth and detergent if necessary. Do not use abrasive materials.
• Do not clean the appliance with a steam cleaner or water jet.
• Assemble the appliance after cleaning and make sure that the heating & control panel is mounted properly, otherwise, the appliance will not function.

Technical Specification

605×51541-11345mm

Remarks: Technical specification is subject to change without prior notification.

Troubleshooting

If the appliance does not function properly, please check the below table for the solution. If you are still unable to solve the problem, please contact the supplier/service provider.

light defective
Hi-limiter (thermal cut-out) tripped.| Reset the Hi-limiter (thermal cut-out) ISee RESET on page 8)
Hi-limiter (thermal cut-out) defective| Contact your supplier
Thermostat defective| Contact your supplier
The appliance does not reach the set temperature.| Long frying time.| Thermostat defective| Contact your supplier
Element defective| Contact your supplier

If after these controls, the malfunctioning continues, it is advisable to contact technical assistance.
In case of any doubt, always contact your supplier!

Warranty Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, a state where and when it was purchased and include proof of purchase (e.g. receipt). In line with our policy of continuous product development, we reserve the right to change the product, packaging, and documentation specifications without notice.

Discarding & Environment
When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point. Failure to follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment, and ecological disposal, either directly or through a public system.

Hendi B.V.
Innovatielaan 6
6745 XW De Klomp, The Netherlands
Tel: +31 317 681 040
Email: info@hendi.eu| PKS Hendi southeast Europe SA
5 Metsovou Str.
18346 Moschato, Athens, Greece
Tel: +30 210 4839700
Email: info@pks-hendi.com
---|---

– Changes, printing, and typesetting errors reserved.
The Netherlands
© 2021 Hendi B.V. De Klomp
Ver: 05-08-2021

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>