lisa 5036282000525 Vibrating Pager User Manual
- June 6, 2024
- LISA
Table of Contents
Congratulations on purchasing your »lisa-RF pager«!
Please read this manual carefully. It will tell you how to set up the system
correctly and explain all the features it has to offer.
Contents of package
Please check if the following parts are included:
– »Lisa-RF-pager«
– neck cord
– 2 x 1.5 V AAA batteries
– User manual
– Warranty card
If any parts are missing, please contact your dealer or the manufacturer
immediately.
Function
The portable »Lisa-RF-pager« is a receiver for the alerts of the various
»Lisa-RF« transmitters and indicates these as vibrations.
6 indicator LEDs with symbols help to distinguish the alert source.
Controls and displays
Event indicator LEDs: The 6 indicator lamps help you to differentiate between
the individual transmitter signals. They light up for a total of 40 seconds.
Low battery indicator: This LED lights up in blue to indicate that the battery
is almost depleted. Please replace the batteries as soon as possible.
Reset button: When you feel the portable RF receiver vibrating, you can switch
off its vibration using the reset button on the receiver. The event indicators
light up and go out automatically after a total of 40 seconds. Furthermore,
you can press the reset button to recall the most recent signal again (the
function works for up to 3 minutes after receiving the signal).
Belt clip: You can use the belt clip to attach the portable RF receiver to
your clothing.
On/Off-Switch: This switch turns the portable RF receiver on and off.
Channel selector: You can select the transmission radio channel using the
channel selector.
USB-C charging socket:
There is a USB-C charging socket on the side of the receiver. If the receiver
is equipped with rechargeable batteries (accessory: 2 x A-4966-0, also
included in the A-2910-0 charging station set), the receiver can also be
charged using a standard USB charger with a USB-C cable instead of the
charging station.
During charging, the battery status indicator lights up red. When charging is
complete, the indicator goes out. The maintenance function of the charge
control automatically keeps the batteries at full capacity. This means that
the charging process can be active again at irregular intervals, with the
battery status indicator lighting up red accordingly. When operating with
normal batteries this charging socket remains without function.
Setting up the device
-
Insert the batteries
The battery compartment is located on the underside of the portable RF receiver. Open it by sliding the cover of the battery compartment away from the receiver using both your thumbs. Insert two 1.5 V AAA batteries and refit the cover again. -
Setting the correct radio channel A digital transmission process ensures that the radio signals are received without errors. This process also makes it possible to set 10 different radio channels. All RF Lisa devices are set to channel 0 by default. It is only necessary to set your system to another channel if you have several different users operating Lisa units in proximity. Set the required channel by using a small screwdriver to turn the channel selector switch, which is located on the right of the receiver, to the required channel number. Use a small screwdriver to adjust this switch. All transmitters and receivers must be set to the same channel.
Operation
- Switching the receiver on Slide the on/off- switch to »on«. The portable RF receiver is now ready to operate. After the device has been switched on, each one of the event indicators lights up briefly in sequence and the receiver vibrates. This is a self-test of the device and lets you know that it is functioning correctly.
- Event identification The portable RF receiver displays the various incoming signals as colored lights and different sequences of vibration.
Telephone: Telephone LED (orange) is lit. Door 1: Door LED (green) is lit.
Door 2: Door LED (green) is flashing.
Baby monitor: Baby-cry-LED (white) is lit.
Call button: Person calling-LED (yellow) is lit.
Water alert: Water alert (blue) is lit.
Alarm: All LEDs are flashing.
Fire alert: The fire alert LED (red) is lit.
Legend for vibration patterns:
| V4 Vibration 0,4 seconds | P8 Pause 0,8 seconds |
|---|---|
| P12 Pause 1,2 seconds | P16 Pause 1,6 seconds |
| P20 Pause 2,0 seconds | P30 Pause 3,0 seconds |
| P36 Pause 3,6 seconds | P48 Pause 4,8 seconds |
The event indicator LEDs remain lit for 40 seconds. The vibration stops after 28 seconds.
3. Recalling the most recent signal
The portable RF receiver stores each signal it receives for a period of 3
minutes. During this time, you can recall the signal again by pressing the
reset button. The event is then indicated by the indicator LEDs. The vibration
is not retriggered.
Battery depleted
The blue battery indicator is lit. Please replace the batteries as soon as
possible.
Transmission range
Note the following points when using the portable RF receiver:
The radio signals are designed to have a range of 80 meters under optimum
conditions.
The following conditions may result in a reduced range:
– Obstacles like building structures or vegetation.
– Interference from TVs, computer monitors, and mobile phones. Under certain
circumstances, these may prevent the receiver from functioning at all.
– Positioning of the transmitter at an unfavorable distance from surfaces that
reflect radio waves, for example, floors and walls. This may lead to a
weakened or even canceled-out signal by the reflected wave.
– Metallic objects reduce the range due to the shielding effect of the metal.
– Particularly in towns and cities, there may be many other sources of radio
waves that can disrupt the original signal.
– Other devices operating at similar frequencies in the vicinity may also
result in mutual interference.
Special accessories
The following modules (not included) can be plugged into the AUX output connector:
| – Vibrating pillow | (A-3303-0) |
|---|---|
| – Flash module MF-1 | (A-3320-0) |
| – Acoustic module MA-1 | (A-3340-0) |
| – Vibrating contraption | (A-3310-0) |
Please note: The internal vibration is deactivated if the receiver is charged over the USB connector or the charging station. The AUX output remains active during charging.
Maintenance and care
All »Lisa-RF« devices are maintenance-free. If the units become dirty, simply
wipe them clean with a soft, damp cloth. Never use spirits, thinners, or other
organic solvents. Please do not expose »Lisa-Funk« devices to direct sunlight
for a long time and please protect them from excessive heat, moisture, and
severe mechanical shocks.
Note: This product is not protected against splash water. Do not place
any containers filled with water, such as flower vases, or anything with an
open flame, such as a lit candle, on or near the product.
Please make sure that the batteries are not exposed to excessive heat from
such as sunlight, fire, or anything similar.
Warranty
All Lisa-Funk devices are very reliable products. Should a malfunction occur
despite the unit having been set up and operated correctly, please contact
your dealer or the manufacturer directly. This warranty covers the repair of
the product and returning it to you free of charge.
It is recommended that you send in the product in its original packaging, so
do not throw the packaging away while the warranty period lasts. The warranty
does not apply to damage caused by incorrect handling or attempts to repair
the unit by people not authorized to do so (destruc- tion of the seal on the
unit).
Repairs will only be carried out under warranty if the completed warranty card
is returned accompanied by a copy of the dealer’s invoice/till receipt.
Always specify the product number in any event.
Disposal of used electric and electronic devices (applicable in the countries of the European Union and other European countries with a separate collection sys- stem).
The symbol on the product or the packaging indicates that this product is not to be handled as ordinary household waste but has to be returned to a collecting point for the recycling of electric and electronic units. You protect the environment and health of your fellow men by the correct disposal of these products. Environment and health are endangered by faulty disposal.
Material recycling helps to reduce the consumption of raw materials. You will receive further information on the recycling of this product from your local community, your communal disposal company, or your local dealer.
This device complies with the following EC directives:
– 2011 / 65 / + 2015 / 863 / EC RoHS directive
– 2012 / 19 / EC WEEE directive
– 2014 / 53 / EC RED directive
Compliance with the directives listed above is confirmed by the CE seal on the
device. CE compliance declarations are available on the Internet
atwww.humantechnik.com/service.
Technical specifications are subject to change without prior notice.
Specifications
Power supply: 2 pcs 1.5 V AAA battery or 1.2 V rechargeable battery
Battery endurance: approx. 800 h with 1.5 V alkaline battery approx. 400 h
with 1.5 V zinc-carbon battery approx. 300 h with 1.2 V rechargeable battery
Frequency: 868,35 MHz
Vibration: Eccentric motor, various vibration sequences for identifying alerts
Height: 85 mm
Width: 60 mm
Depth: 28 mm
Weight: approx. 88 g
Operating range: 0° C – 40° C
Specifications are subject to change without prior notice.
Sarabec Ltd. Tel.: +44 (0) 1642 247 789
15 High Force Road Fax: +44 (0) 1642 230 827
TS2 1RH Middlesbrough E-mail: mail@sarabec.co.uk
RM2409-0_2021-05
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>