WYZECP1 Labs Cam Pan Tilt Smart Home Camera User Guide
- June 6, 2024
- Wyze
Table of Contents
WYZECP1 Labs Cam Pan Tilt Smart Home Camera
QUICK START GUIDE
GET BETTER SECURITY WITH + CAM Plus
Record Full-Length Videos
Get unlimited full-length video recordings.
Smart AI Detection
Detect people, packages, vehicles, and more.
Back-to-Back Event Recording
Capture everything without 5-minute gaps.
Exclusive Discounts
Get exclusive discounts on Wyze products.
Subscribe or learn more at services.wyze.com.
IN THE BOX
Wyze Cam Pan × 1
USB Cable × 1
Power Adapter × 1
Quick Start Guide × 1
- Lens
- Status Light
- Light Sensor
- Power Input
- MicroSD Slot (SD card not included)
- SETUP Button
- Microphone
SETUP
- Download the Wyze app and create an account
- Connect the camera to a power outlet and wait for 15 seconds until the red status light flashes.
- Press the SETUP button for 3 seconds until a voice prompt sounds.
- Follow along in the Wyze app to finish setup.
LIGHT INDICATORS DURING INSTALLATION
Solid red light The device is powered on and initializing
Flashing red light The device is ready to connect
Flashing red and blue lights Connection is in progress
Flashing blue light The device is connected and finishing setup
Solid blue light The device is working properly
LIGHT INDICATORS AFTER SETUP
Solid red light Live stream is being viewed or a recording is in
progress
Quickly flashing red light Siren is in use
Solid blue light The device is working properly and no operations are
running
FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC WARNING:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISEDC RADIATION EXPOSURE STATEMENT:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body.
Only use the power supply provided.
ISEDC RSS WARNING:
This device complies with ISEDC licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) T his device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
NEED HELP?
Contact our Support Team: https://wyze.com/support
Join the Community: https://wyze.com/community
Scan the QR code to learn more