SHURIKEY GEAR SZB81 Keyboard Instruction Manual

: June 6, 2024
: SHURIKEY GEAR

Shurikey Saizo 80% EC V2
Mechanical Keyboard Manual

Layout

Knobs

The left knob is to adjust the backlight. Press the knob to switch on/oﬀ the backlight. Turn clockwise to increase the brightness and counterclockwise to decrease.
The right knob is the volume control. Press the knob to switch on/oﬀ media sound. Turn clockwise for volume up and counterclockwise for volume down.
Indicator Lights
The left one is the Caps Lock indicator. It lights up in white for uppercase input mode; lights oﬀ for lowercase input mode.
The right one is the Scroll Lock indicator. It lights up in white when Scroll Lock is locked while lights oﬀ when unlock.

Turn on the Bluetooth

Press the Space Bar for three times within two seconds to turn on the keyboard.

Bluetooth Connection State

All LEDs will be lit as default after the keyboard powers on.
The keyboard can connect to three Bluetooth devices at the same time. The indicators on F1、 F2、 F3 represent the three devices respectively — lights up for connected state while ﬂashes means no connection detected.
Press Fn + the right Alt at any time to toggle between indicator lights and backlights.

Device Connection

After the keyboard is powered on, search for Bluetooth Keyboard on your device. The name of the keyboard is shown as “WK-VD01”, “WK-VD02”, or “WK-VD03”.
Password is required for the ﬁrst matching. Then press Enter to conﬁrm connection. The corresponding indicator light will be lit. The device will be set as the default connection.
Bluetooth memory: The Bluetooth will automatically connect to the latest gadget. The Bluetooth launcher lasts for ﬁve minutes, during which the keyboard will automatically enter sleep mode if no connection is detected.

Turn oﬀ the Bluetooth

In Bluetooth mode, press and hold Fn + Delete for three seconds to turn oﬀ the keyboard.

Switch from Bluetooth Mode to Wired Mode

With the key combination of Fn + Delete, users can switch the keyboard between wired mode and Bluetooth mode. From wired to Bluetooth mode, the Caps Lock indicator will ﬂash for three times, the keyboard will then automatically connect to the latest gadget. If no connection is detected, the Bluetooth indicator light on F1, F2, or F3 will ﬂash, the corresponding channel will enter matching mode. From Bluetooth to wired mode, the Caps Lock indicator will ﬂash for once, and then the indicator on F1, F2 or F3 will light oﬀ.
In both wired mode and Bluetooth mode, press Fn + F1/ F2/ F3 to swiftly switch among the Bluetooth devices connected under Channel 1 to 3. If the channel doesn’t detect a connection, the Bluetooth indicator will ﬂash and enter matching mode.
In wired mode, with the USB cable unplugged the keyboard will switch to Bluetooth mode and automatically connect to the latest gadget. If no connection is detected, the Bluetooth indicator light will ﬂash and enter matching mode.
When the keyboard is powered oﬀ, plug in the USB cable, and the keyboard will enter wired mode.
In Bluetooth mode, with the USB cable plugged in the keyboard will switch to wired mode and the Bluetooth indicator will light oﬀ.

Power Saving Mode

Power saving mode can only be set in Bluetooth mode. As the default setting, the keyboard will automatically enter a power-saving mode in 30 minutes if no keypress is detected. To disable, please press Space.

Press and hold Fn + 1 for three seconds, Caps Lock will ﬂash for three times. Then the keyboard will enter a power-saving mode in 5 minutes if no keypress is detected.
Press and hold Fn + 2 for three seconds, Caps Lock will ﬂash for three times. Then the keyboard will enter a power-saving mode in 30 minutes if no keypress is detected.
Press and hold Fn + 3 for three seconds, Caps Lock will ﬂash for three times. Then the keyboard will not enter power-saving mode.

Sleep Mode

In wired mode, the keyboard will enter sleep mode with the computer. Press Space to wake up the keyboard.
In Bluetooth mode, the keyboard will enter sleep mode with the computer or in ﬁve minutes after the computer is powered oﬀ. When the computer is powered on, press Space to wake up the keyboard.

Game Mode

In wired mode, the keyboard is set as PC mode when powered on with 10ms of general latency.
Press and hold Fn + Backspace for three seconds till the Caps Lock indicator quickly ﬂashes for ﬁve times, the keyboard will switch to game mode with 5ms latency.
Press and hold Fn + Backspace for three seconds till the Caps Lock indicator slowly ﬂashes for ﬁve times, the keyboard will switch back to PC mode.

Pair New Devices

Press and hold Fn + F1/F2/F3 for ﬁve seconds to disconnect the corresponding Bluetooth connection. The indicator light will ﬂash and then the keyboard will enter pairing mode again.

Low Battery Warning

When the right indicator light ﬂashes, it means the battery is running out. If no charging is detected in 10 minutes after the low battery warning, the keyboard will be automatically turned oﬀ.

Charging Notiﬁcation

All 5V power supplies including a computer, charger or power bank can charge the keyboard. During charging, press Fn + the right Alt to check the ESC indicator light. If it lights up, the battery is full; it ﬂashes, the battery is still charging. In wired mode, the keyboard will be charged automatically.

Light Eﬀects	Brightness Adjustment	Speed Adjustment
Always Lit	√	×
Single Key	×	√
Wave Mode	√	√
Breathing Mode	×	√
EKG	√	√
Streamer	×	√

The default light eﬀect is set as “Always Lit”. Please refer to Light Controls on the next page to change light eﬀects through key combinations.

Light Controls

Key Combination	Function

Fn + ↑
Fn + ↑| Previous Eﬀect (Loop)
Fn + ↓
Fn + ↓| Next Eﬀect (Loop)
Fn + ←
Fn + ←| Lower the Speed
Fn + →
Fn + →| Speed Up the Light Eﬀect

Multimedia

Key Combination	Function

Other Key Combinations

Key Combination	Function
Fn + P	Print Screen
Fn + [	Scroll Lock
Fn + ]	Pause
Fn + ;	Home
Fn + ‘	End

Other Functions

Press Fn + Alt + Win, lock/unlock Win.
Press and hold Fn + the left Ctrl for three seconds, Caps Lock indicator light ﬂashes for three times, Caps Lock and the left Ctrl toggle. Press the same key combination for three seconds to toggle back.
Six-key anti-ghosting for Bluetooth mode. All-key anti-ghosting for wired mode as default. Press and hold Fn + S for three seconds to switch between six-key and all-key anti-ghosting.

Reset

Reset the key settings: Press Fn + D + Backspace, Caps Lock indicator light ﬂashes for three times, all key settings will be reset to original manufacturer settings.
Factory Reset: Press and hold Fn + D for three seconds, Caps Lock indicator light ﬂashes for three times, all key codes, light eﬀects and Bluetooth connection history will all be factory reset.

System Compatibility

This keyboard is compatible to Win8, Win10, Win11, MAC OS (special key codes not fully compatible). Other types of Bluetooth should be updated to no less than 4.0 for compatibility.

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.