Petcube BL10US Bites 2 Lite Interactive WiFi Pet Monitoring Camera User Guide
- June 6, 2024
- Petcube
Table of Contents
Petcube BL10US Bites 2 Lite Interactive WiFi Pet Monitoring Camera User
Guide
SETUP
-
Power up the camera and wait for yellow light to flash
-
Press the Setup button on the side speaker above the USB port until you hear a sound
-
Follow instructions in the app to finish the setup
PLACEMENT
It’s best to point Bites 2 Lite in the direction where your pets spend most of
their time so their activities are captured with the wide-angle lens.
If placing on a table or a shelf, put Bites 2 Lite at least 3 feet above the
floor. A rubber foot at the bottom provides a firm grip on the surface.
If you want to hang the camera on a drywall, anchor screws are included in the packaging for easy and secure setup.
Wall mounted position gives extra protection from eager pets and allows for the best room coverage.
DISPENSER SETUP
Detachable Treat Container
Detach the treat container by pushing the release buttons on both sides and
pulling it up away from the base.
Control Treat Portions
3 orange inserts help control how many treats you fling at once. Usually it
flings 1-3 treats at a time. The insert for medium-size treats is preset by
default. For small and large size treats, use the other included inserts.
TREAT COMPATIBILITY
Petcube Bites 2 Lite is compatible with a variety of treat brands. We recommend dry crunchy treats with dimensions of 1″ or less.
Use your pet’s favorite compatible treats. Keep in mind that the size of treats you are using may affect the amount of treats that come out of the device.
More details at petcube.com/bites-treats
LIGHT STATUS
PRODUCT INFO
Petcube user guide
The explanations provided in this guide are for informational purposes only
and may be modified. The latest version of this guide can be found at
petcube.com/user-guide/bites-2-lite.
Software
Your Bites 2 Lite connects to Petcube, Inc. copyrighted software to control
its operation.
Integration with Amazon Alexa
Go hands-free with voice commands to control your Petcube device. More
information at petcube.com/bIog/alexa.
One-year limited warranty
When Petcube Bites 2 Lite is purchased new through Petcube authorized
resellers, it is warrantied against defects in materials and workmanship under
normal use for a period of 1 year from the date of the retail purchase. Full
terms can be found at
petcube.com/docs/warranty.
Safety and handling
For more information about safety and handling, please see
petcube.com/user-guide/bites-2-lite. To avoid injury or harm, read all safety information and
operating instructions prior to using Petcube Bites 2 Lite.
Regulations
This device complies with RCM, RoHS, FCC. Please visit
petcube.com/terms-of-use for more
information.
DO’S & DONT’S
Watch and talk to your pet remotely. Record videos and get notifications about your pet’s activity.
Share access to your Bites 2 Lite with friends, family or anyone within the Petcube community.
Fling treats to your pet on demand or on a schedule. Use it as a training aid and to reinforce positive behavior.
- Don’t drop, hit, or shake your Petcube Bites 2 Lite.
- Don’t stain, scratch, or otherwise damage the front camera glass.
- Don’t expose to liquid, moisture, dust, excessive heat, or open flames.
- To avoid overheating, don’t leave Petcube Bites 2 Lite in direct sunlight.
- Treats dispensed by Petcube Bites 2 Lite should not replace your pet’s normal meals. Petcube Bites 2 Lite should not be used to dispense medication to your pet.
- Please keep in mind treat expiration dates and ensure you are only providing your pets with fresh treats. To prevent mechanical problems, use only compatible treats.
- Be aware that using treats with your pet exposes them to choking hazards. Ensure your pet is familiar with the treats you are using and that you monitor their consumption.
- Petcube Bites 2 Lite should not be used by minors without supervision from an adult.
- Protect the power cord from being walked on, pinched, or chewed on by pets.
- If a treat gets jammed in the container or flinging mechanism, first empty and remove the container, then cautiously remove it with your finger or a pen. Do not use sharp instruments or apply too much pressure, this can damage the device.
SAFETY INSTRUCTIONS
The socket-outlet shall be installed near the equipment and shall be easily accessible.
- Maximum ambient temperature around the adapter must not exceed 40°C.
- The adapter is used for office machines and data processing appliances. It is certified according to the relevant safety standards UL 62368-1, CSA 022.2 No.62368-1.
- The output power taken from the supply must not exceed the rating given on the adapter.
- The adapter is not intended to be repaired by service personnel in case of failure or component defect (unit can be thrown away).
- The disconnection from line voltage is made by main plug.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
ISED Statement
This device complies with Industry Canada license‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
CONTACT
For any assistance with the device, please contact us directly at:
support@petcube.com
We’ll resolve any issue ASAP. Pet parents’ experience is our top priority.
Join the Petcube pack
@petcube
petcube
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>