PETCUBE Cam 360 Indoor WiFi Pet and Security Camera User Guide

: June 13, 2024
: Petcube

Table of Contents

PETCUBE Cam 360 Indoor WiFi Pet and Security Camera
Product Information
Product Usage Instructions
**Mounting Instructions
SETUP
MOUNT
LIGHTS
SAFETY
SOFTWARE
WARRANTY
FCC Warning
Declaration of Conformity
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PETCUBE Cam 360 Indoor WiFi Pet and Security Camera

Product Information

The Petcube Cam 360 is a camera designed for pet monitoring. It allows you to stream video, record footage, and control its operation using the Petcube mobile app. The camera can be mounted to a flat surface using the included mounting bracket and screws, or it can be stuck to an inclined surface using the adhesive tape. The camera has different LED light indicators to indicate its status, such as streaming video, recording, online status, connecting to the cloud or router, booting up, and system errors. For more information about safety, handling, software, terms of use, and warranty, please refer to the links provided below.

Product Usage Instructions

Download the Petcube App from your app store and register your account.
Power up the camera.
Press the setup button on the camera.
Follow the instructions in the app to complete the setup process.

**Mounting Instructions

**

To mount the camera to a clean flat surface:

Use the marker to draw the positions where you want to mount the camera.
Screw two expansion screws into the previously marked positions.
Fix the mounting bracket to the wall.
Snap the camera base into the bracket.

Alternatively, you can stick the camera to an inclined surface using the adhesive tape from the box. If desired, you can also use the protective strip with the camera’s edge to prevent damage.

LED Light Indicators

Pulsing Blue: Cam 360 is streaming video.
Blue blinking once: Cam 360 recording started.
Solid blue: Cam 360 is online.
Fast flashing blue: Connecting to the cloud, finishing setup.
Flashing blue and yellow: Connecting to the router.
Solid yellow: Cam 360 is booting up.
Fast flashing yellow: The device is ready for setup.
Pulsing yellow: Connection or system error.

Safety Information
To ensure safety and proper usage:

Read all safety information and operating instructions before using the Petcube Cam 360.
Refer to the provided links for more detailed safety and handling information.

Product Support and Information
For more detailed product information, support, terms of use, and warranty, please visit the following links:

FCC and Canadian Compliance Statements

The Petcube Cam 360 complies with FCC and ISEDC regulations.
Please refer to the user manual for further details regarding FCC compliance and radiation exposure limits.

SETUP

Download the Petcube App and register your account
Power up the camera
Press the setup button
Follow the instructions in the app to ﬁnish the setup

MOUNT

Use the mounting bracket from the box to mount the camera to a clean ﬂat surface

Use the marker to draw the positions
Screw 2 expansion screws into the previously marked position
Fix the mounting bracket to the wall
Snap the camera base into the bracket

Or you can stick the camera to an inclined surface with the adhesive tape from the box. Optionally, you can use the protective strip with the camera’s edge to avoid damage.

LIGHTS

Pulsing blue
Cam 360 is streaming video
Blue blinking once
Cam 360 recording started
Solid blue
Cam 360 is online
Fast ﬂashing blue
Connecting to the cloud, ﬁnishing setup
Flashing blue and yellow
Connecting to the router
Solid yellow
Cam 360 is booting up
Fast ﬂashing yellow
Device is ready for setup
Pulsing yellow
Connection or system error

SAFETY

For more information about safety and handling, please see: https://petcube.com/support/cam-360/user- guide/
To avoid injury or harm, read all safety information and operating instructions prior to using Petcube Cam 360.

Don’t drop, hit, or shake your Petcube Cam 360
Don’t stain, scratch, or otherwise damage the front camera glass
Don’t expose to liquid, moisture, dust, excessive heat, or open ﬂames
To avoid overheating, don’t leave Petcube Cam 360 in direct sunlight
Petcube Cam 360 should not be used by minors without supervision from an adult
Protect the power cord from being walked on, pinched, or chewed on by pets
The socket outlet shall be installed near the equipment and shall be easily accessible
The maximum ambient temperature around the adapter must not exceed 40°C (104 °F).
The adapter is used for oﬃce machines and data processing appliances. It is certiﬁed according to the relevant safety standards UL 62368-1, CSA 022.2 No. 62368-1.
The output power taken from the supply must not exceed the rating given on the adapter
The adapter is not intended to be repaired by service personnel in case of failure or component defect (unit can be thrown away)
The disconnection from line voltage is made by the main plug

PRODUCT INFO

The explanations provided in this guide are for informational purposes only and may be modiﬁed. The latest version of this guide can be found at https://petcube.com/support/cam-360/user-guide/

SOFTWARE

Your Petcube Cam 360 connects to Petcube, Inc. copyrighted software to control its operation.

TERMS OF USE

For more information, please visit https://petcube.com/docs/terms-of-use/

WARRANTY

When Petcube Cam 360 is purchased new through Petcube authorized resellers, it is warranted against defects in materials and workmanship under normal use. Full terms can be found at: https://petcube.com/docs/warranty/ https://petcube.com/care/

FCC Warning

Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Only use the power supply provided.

ISEDC RSS Warning.
Canadian Compliance Statement.
This device complies with ISEDC license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance 20 cm between the radiator & your body. Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The frequency bands in which the radio equipment can operate: are 2412.0 – 2462.0 MHz.

Declaration of Conformity

Hereby, Petcube Inc. declares that this Petcube Cam 360 is in compliance with Directive 2014/53/EU and Radio Equipment Regulation 2017. The full text of the declaration of conformity is available at the following internet address: https://petcube.com/docs/declaration-of-conformity-petcube-cam360/

CONTACT

For any assistance with the device, please contact us directly at: support@petcube.com
We’ll resolve any issue ASAP.
Pet parents’ experience is our top priority.
Share your feedback

Join the Petcube pack