VELLO BG-S8 Battery Grip User Manual
- June 6, 2024
- Vello
Table of Contents
VELLO BG-S8 Battery Grip
Thank you for choosing Vello.
The Vello BG-S8 battery grip offers extended shooting time and a
comfortable hand position when shooting in a vertical (portrait) orientation.
It’s compatible with the Sony a6600 mirrorless camera, and it accepts up to
two Sony NP-FZ100 rechargeable batteries. Its alternate shutter-release button
works with the included MultiTerminal cable.
Please read through this entire manual before using the BG-S8 battery grip
Precautions
- The BG-S8 should be used only with compatible devices specified in this manual.
- Use only with the batteries and battery holders recommended in this manual.
- If you notice smoke, noise, or an unusual smell from the battery pack, discontinue use immediately. Remove the batteries and take the device to a Vello authorized reseller.
- The battery level may not display properly if batteries are installed before mounting the grip
- Remove batteries from the grip when not in use. 6. Do not attempt to disassemble. 7. Avoid exposing this product to water or extreme humidity, and keep it in a dry, cool place.
- Keep out of reach of children.
- All images are for illustrative purposes only.
OVERVIEW
- Shutter release button
- Thumbwheel lock
- Nonslip grip
- Tripod socket
- Hand-strap mount
- Connection plate cover recess
- Power ON/OFF switch
- Mounting screw
- Shutter-release socket
- Battery tray
- Battery tray lock
- Battery slot
- Slot 2 contacts
- Slot 1 contacts
- Battery slot 1
- Battery pack adapter
- Battery pack adapter contacts
- Shutter release cable
Attaching the Battery Grip
-
Ensure that the camera power is turned off.
-
Open the camera’s battery chamber door, and insert the battery pack adapter.
-
Open the camera’s connection plate cover, and close the battery chamber door. This will leave the battery pack adapter’s contacts exposed.
-
Align the camera’s tripod socket with the BG-S8’s mounting screw, and insert the camera’s connection plate cover into the recess.
-
Rotate the thumbwheel counterclockwise until it’s firmly tightened.
-
Connect the shutter release cable from the 2.5 mm socket on the battery grip to the Multi-Terminal port on the camera body.
Inserting the Batteries
-
Lif t and rot ate the bat ter y tray’s lock
counterclockwise and remove the tray from the grip.
-
Align the contacts of the first battery with slot 1, and slide the battery in and down until it clicks. Repeat this step for the second battery
-
Insert and lock the battery tray inside the battery grip.
-
Turn on your camera and switch the battery grip’s power switch to the ON position.
Note: When removing the grip, turn off the grip and camera power, and remove the batteries.
Specifications
Power source | Up to two NP-FZ100 rechargeable Li-ion batteries |
---|---|
Shutter-release socket | 2.5 mm |
Operating temperature | 32°F to 104°F (0°C to 40°C) |
Dimensions (H × W × D) | 2.4 × 4.8 × 2.6 in. (61 × 121.8 × 65.7 mm) |
Weight | 6.8 oz. (194 g) without batteries |
ONE-YEAR LIMITED WARRANTY
This VELLO product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Vello along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group. © 2021 Gradus Group LLC.
All Rights Reserved.
All other trademarks are the property of their respective owners.