globe 50457 Smart Flushmount Installation Guide

globe 50457 Smart Flushmount

Thank you for selecting Globe as your smart home solution. With proper care, this product will provide years of pleasure and enjoyment.

SMART FLUSHMOUNT

Check out product videos on our YouTube channel, on the Globe Smart Home – Amazon Certified for Humans playlist!”‘

SAVE THESE INSTRUCTIONS

CAUTION IMPORTANT SAFETY INSTRUCTIONS

• Most electrical accidents are caused by carelessness or ignorance. If you combine a basic knowledge of electricity, a healthy respect for it, and a dose of common sense, you can safely tackle many household electrical repairs. Here are some basic guidelines for working with electricity:
• Before working on a circuit, goto the main service panel and remove the fuse or trip the breaker that controls that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work
• Before touching any wire, use a voltage tester to make sure it’s not live.
• Whenever you check for voltage in a receptacle, check both outlets- each may be controlled by a separate wiring circuit.
• When replacing fuses, turn off the main power first. Make sure your hands and feet are dry, and place one hand behind your back to prevent electricity from making a complete circuit through your chest. Touch a plug fuse only by its insulated rim. Remove cartridge fuses with a fuse puller.
• Use tools with insulated handles and ladders made of wood or fiberglass.
• Keep dry-chemical fire extinguishers in the kitchen, basement, and workshop.
• Never disable grounding devices. Make sure that all appliances requiring grounding are properly grounded, and that the electrical system itself is properly grounded.
• Meet or exceed all electrical code requirements that cover the work you are doing.
• Always work with enough light to see what you are doing; it’s easy to make mistakes when you’re working in dim light.
• When in doubt a bout the safety ofany electrical repair or test, ca 11 in a professional.

CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH Cl RCU IT CONDUCTOR.

This device complies with Part 75 of the FCC rules. Operation is subject to the following two conditions: OJ this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 75 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

RF EXPOSURE
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.
USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (7) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-005 (B).
RADIATION EXPOSURE STATEMENT:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &your body.
FCC RESPONSIBLE PARTY
Globe Electric
75307 Shoemaker Ave, Norwalk, CA 90650
www.globe-electric.com

Warranty: This product comes with a 5 year product warranty effective from the date of purchase. If the failure of this product is caused by defects in the material or workmanship, it will be repaired or replaced at no charge to you. You must supply a copy of your dated cash register receipt when you request warranty service.
Return the product with your cash receipt as proof of purchase prepaid to Globe Electric Company Inc. Globe reserves the right to repair or replace the product at its option. Repair or replacement, as described above, shall be the sole remed:y to the customer and there shall be no liability on the part of Globe for any special, indirect, incidental or consequential damages, including but not limited to any loss of business or profits, whether or not foreseable. Some jurisdictions may not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any modification to this product or failure to comply with safety instructions will void the warranty.

FEATURES

• LED integrated – dimmable through the app
• RGB: Choose from a full spectrum of colors
• Tunable white (2000 K- 5000 K): Choose from a focused bright white to a relaxed sunset glow
• Manually or remotely control your light with the Amazon Alexa app
• Pair with Amazon Echo to control your light through voice commands
• Set schedules and control your light from anywhere

SPECIFICATIONS

.Cleaning: Before cleaning your light fixture, turn off the switch or power source. Wipe the lamp with a soft, damp cloth.

PRE-INSTALLATION

Planning Installation
Compare all parts with the “Hardware Included” section. If any part appears missing or damaged, do not install this product and contact the Customer Service team at l-888-543-7388 or e-mail to info@globe-electric.com

Tools Required

Hardware Included
NOTE: Hardware is not shown to actual size.

MOUNTING INSTRUCTIONS

ELECTRICAL INSTALLATION

• FIG. 1. Place the wall switch to the “OFF” position.
  Depending on which type of fuse box you have in your home:

• FIG. 2. Place either the main (Master) switch to the “OFF” position, cutting off power to your entire home OR turn off the individual switch that provides power to where the fixture will be installed.
  OR

• FIG. 3. Place either the main (Master) switch to the “OFF” position, cutting off power to the entire home OR unscrew the fuse that provides power to where the fixture will be installed.

INSTALLATION

Note: The wire colors indicated in this manual are the common colors and may differ in some homes. Please contact an electrician if you have different wire colors.

Stepl

• Remove existing fixture after having turned off the power at the circuit breaker and tested the outlet with a voltage tester.
• Please mark your positive and negative wires from the outlet to help you with the new connection.
• Attach the ground wire from the fixture to the ground wire from the outlet box.
• Connect the negative wire (white) form the outlet to the negative wire in the fixture.
• Connect the positive wire (black) from the outlet to the positive wire in the fixture.
• Secure all connections with the wire connectors and wrap electrical tape (not included) around the wire connectors.
• Push all excess wire back into the outlet box.

Step2
Installing the light fixture

• Align the holes of the canopy with the mounting screws and the outlet box.
• Secure the canopy to the outlet box using the mounting screws.

Step3
Finishing the installation

• Place the shade into the canopy and turn clockwise to secure it in place.
• Installation is done, please see below on how to pair to the Amazon Alexa app.

CONNECTING INSTRUCTIONS

1. Download the Amazon Alexa app.

2. Power on your device.
   Ensure your device has been installed correctly by following the instructions in the “Installation” section.

3. Scan barcode

   • Launch the Amazon Alexa app.
   • Select “Add a Device”.
   • Select “Light”, locate Globe Electric and follow the in-a pp instructions on how to scan the 2D barcode.

Please note:
The device is automatically in pairing for 5 minutes once powered on. When you scan the barcode, the white light will flash indicating the pairing is successful. If within 5 minutes, it does not connect, turn the device OFF and ON again to re-enter pairing mode.

Please keep these instructions in a safe place. This is the only duplicate of the unique QR code for your product. You may need it to reconnect the product to your account or transfer it to another account.

• Don’t have a barcode?
  Select “Don’t have a barcode?” in the Alexa app and follow the in-a pp instructions on how to connect without a 2D barcode.

• How to factory reset device
  If you a re strugg Ii ng to set up your device, or if the device was a I ready connected to a network, perform a factory reset by following the instructions below:
  l. Turn device ON for 10 seconds.
  2. Turn device OFF and ON Sx. The light will flash RED and then the light will change to WHITE. When the light changes to WHITE, this means the factory reset mode was successful.
  3. Scan the inner barcode (located in the instruction manual) and connect within 5 minutes. If you fail to connect within the 5-minute time frame, turn the device OFF and ON again once to re-enter pairing mode.

The light will I flash WHITE to indicate that the pairing was successful

FUNCTIONALITY

Voice control with Alexa

• On/Off
• Dimming
• Shades of white
• Colors
• Moods

Using the Amazon Alexa app on a mobile device
With the Amazon Alexa app, you can easily manage your home setup and directly control your Globe Electric lights.

• On/Off
• Dimming
• Shades of white
• Colors
• Out of home control
• Add your lights to Alexa Routines Add your lights to Alexa Guard

Check out product videos on our YouTube channel, on the Globe Smart Home – Amazon Certified for Humans playlist!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>