Schelinger RS-WIFI2 Astronomical WiFi Time Switch User Manual
- June 6, 2024
- Schelinger
Table of Contents
Schelinger RS-WIFI2 Astronomical WiFi Time Switch
Smart, astronomical, single-channel WIFI PROGRAMMER – RS-WIFI2 enables remote controlling of connected devices from all over the world by using app (aviable on Android and iOS) on your smartphone or tablet.
The main condition is stable connection of a programmer to a wifi network with Internet access. Programmer has a lot of useful functions listed below, thanks to which it’s useful in controlling: lighting on building facades, parking lots, staircases and many other electronical devices.
The programmer has a useful astronomical function that allows to control devices depending on sunrises and sunsets – it takes into account actual time and geographical coordinates of the place where it’s installed.
Parts Description
-
„S” TERMINAL ˛ controlling the operation of the receiver with an external button.
-
THE GREEN STATUS LED of WiFi network:
– flashing fast: waiting to connection
– ON: connected to the WiFi network
– OFF: problems with the WiFi network. -
RED RELAY STATUS LED:
– LED ON: Relay ON
– LED OFF: Relay OFF
-
BUTTON TO MANUALY CONTROL THE DEVICE:
– Quick press: command to switch the relay status
– >5s – search for a WiFi network to connect (first switch-on)
– >5s – RESET command
TECHNICAL DATA
-
Rated voltage
48-240V 50/60Hz -
Power consumption
P on: 1.5W -
Resistive load
Max 16A -
Standby power
Psb: <0.5W -
Isulation voltage
Ui: 450V -
Surge current
Uimp: 4kV -
Overvoltage category
III -
WIFI frequency
WIFI 2.4GHz b/g/n
Bluetooth 4.2 -
Safety system
WEP, WPA/WPA2 -
Supply terminals:
L – N (Max 2.5mm2) -
Output terminals
1 – 2 (Max 2.5mm2) -
Relay contact
1NO (AC1 16A/250V) -
Operating temperature
-20°C ÷60°C -
Appliance classes
(klasa II) -
International Protection Rating
IP20 -
Mounting
szyna TH-35 (DIN 35) -
Tightening torque
0,5Nm
DIMENSIONS
WIRING DIAGRAM 
INSTALLATION AND CONFIGURATION
Scan the QR Code and download „Smart Life” app.
Connect the device to AC/DC48V-240V as per the wiring diagram (page 1)
Register/Login Account 
After first launching the application will
request permissions for your location. If you do not consent, your device WILL
NOT BE FOUND.
Press for about 5s. and hold light blinks fast.
Click to turn ON or turn OFF the device
APPLICATION FEATURES
Device configuration automatically synchronized in the cloud. After pairing
the RS-WiFi programmer with another device (smartphone, tablet, etc.) all
entered schedules remain unchanged
When two functions overlap in time, the application warns the user about this and asks to accept the change.
FUNKCJA „COUNTDOWN”
The “Countdown” function allows user to apply a countdown to the operation time of connected device. Set the elapse time hour and minute.
FUNKCJA „SCHEDULE”
Daily / weekly program.
Automatic start or turning off the timer on selected days of the week.
Set time, week, output state (ON / OFF) and click “Save” .
FUNKCJA „CIRCULATE”
Allows user to set interventions with programmed duration in a certain period
of time. 
FUNKCJA „RANDOM”
The „Random” function allows user to set a time interval for random switch on and off.
Working time cannot be shorter than 30min.
Cycle duration 1h:
- Works within 2-30min after starting,
- and stop until 2-30 min before closing
FUNKCJA „INCHING
Enable this feature will put the device in an automatic state. Each time the
device is switched on, it will automatically switch off a set of period of
time 
FUNKCJA „ASTRONOMICAL”
Control depending on the sunrise and sunset times, taking into account the information about the geographic coordinates of the programmer’s installation location. It is possible to shift the sunrise or sunset time to 4h 59min.
SECURITY
The RS-WIFI2 programmer is designed for indoor installation. Before mounting,
read the instructions and disconnect the power supply. Installation should be
performed by a qualified user authorized to mount electrical devices depending
on the applicable regulations in a given country, in accordance with the
mounting diagram. Modifications to the product may cause threat and loss of
warranty. The device should be installed only in rooms with constant WIFI
coverage
MAINTENANCE
All maintenance work should be carried out after disconnecting the power supply. Use dry and delicate materials for cleaning. Do not use chemical agents. Product not adapted to work in an environment with unfavorable conditions, i.e. high dustiness / humidity, water, explosive zones, vibrations, chemical fumes.
RECOMMENDATIONS
Failure to follow the instructions in the manual may result in a fre, electric
shock, burns or other damage. Bemko Sp. o.o. is not responsible for failure to
comply with the above recommendations.
We also reserve the right to make changes to the manual – the current version
is available at www.schelinger.eu
Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with Your Local Authorityor retailer for recycling advice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>