trevi 0H10F600 Home Audio Mini System User Guide

trevi 0H10F600 Home Audio Mini System

For additional information and updates on this product see www.trevi.it.

UK PLUG ONLY
WIRES CONNECTIONS TO A UK THREE-PIN PLUG

The wires in this mains lead are colored by the following wiring codes:

• Blue: ……………….. Neutral
• Brown: ……………………. Live

The wires in this mains lead must be connected to the terminals in the plug as follows:

• Blue wire: ……………… N or Black
• Brown wire: …………… L or Red

Neither wire is to be connected to the earth (E or W) terminal of the three- pin plug. Should the fuse fail in the plug remove the plug from the wall socket and replace the fuse with a 3 Amp. ASTA approved BS 1362 fuse.

CAUTION
This symbol on the back of the unit and in this manual indicates the presence on of important instructions for safe use. Please read them carefully before using the appliance.

DANGEROUS VOLTAGE
This symbol on the back of the unit and in this manual indicates the presence of this equipment components operating at high voltage, do not open it to avoid the risk of electric shock.

WARNINGS ON THE LASER
This device is equipped with a laser beam reading system. Although the laser is of low power and with a safety device that prevents open door operation, scrupulously observe the following warnings: Do not bring the eye to the laser lens with the device open, risk of retinal injury. Do not attempt to disassemble or tamper with the laser unit, risk of radiation absorption.

NOTES OF USE

Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 10cm (4″) of free space along the sides and top of the equipment.10cm (4″) 10cm (4″):

• Use the unit on a firm, level surface free from vibration.
• Place the unit at least 30 cm (12″) away from any CRT TV to avoid color variations across the TV screen. If the variations persist, move the unit further away from the TV. LCD TV is not prone to such variation.
• Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity, and electronic/electrical equipment (home computers, facsimiles, etc.) that generate electrical noise.
• Do not place anything on top of the unit.
• Do not expose the unit to moisture, temperatures higher than 40°C (104 °F), or extremely low temperatures.
• If your system does not work properly, disconnect the AC power lead from the wall socket. Plug the AC power lead back in, and then turn on your system.
• In case of an electrical storm, unplug the unit for safety.
• Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires.
• The AC power plug is used as a disconnect device and shall always remain readily operable.
• Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local service facility.
• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• This unit should only be used within the range of 5°C – 35°C (41 °F – 95°F).
• The apparatus is designed for use in moderate climates.
• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Keep this manual for future reference.

CARE AND MAINTENANCE
For cleaning, we recommend the use of a soft, slightly damp cloth. Avoid solvents or abrasives.

IMPORTANT
The good construction of this machine guarantees perfect functioning for a long time. However, should any problem arise, you should consult your nearest authorized service center. TREVI pursues a policy of continuous research and development. Therefore, the products may have different features from those described.

• To avoid possible hearing damage, limit the time listening at high volumes

DESCRIPTION OF CONTROLS

FRONT UNIT VIEW

RE

1. Main Power Switch

2. STANDBY/MODE button

3. button, previous track/radio station

4. button, next track/radio station

5. button, Open/Close the CD tray

6. Volume adjustment/

7. Headphones socket

8. CD tray

9. USB input

10. Antenna

11. Audio Input (LINE IN)

12. R/L speaker connection sockets

13. Power cord
    REMOTE CONTROL

14. Standby button

15. MUTE button, device sound exclusion

16. RPT button, repeat mode

17. FUNG button, source selection

18. EQ button, selection of various preset sound modes

19. button, Play/Pause/ confirm selection

20. button, previous track

21. CH+ button, preset radio station

22. button, Stop

23. CH- button, preset radio station

24. PROG button, programming

25. VOL +/- buttons, volume adjustment

26. button, next track

27. FOLD-, previous folder in CD or USB mode

28. FOLD+, next folder in CD or USB mode

29. OPEN/CLOSE button, open/close CD tray

ACTIVATION AND REPLACEMENT OF REMOTE CONTROL BATTERY
The remote control has a cell battery already installed. To activate the battery, remove the transparent tab at the bottom of the remote control. The remote control is now ready to use.

To Replace Battery:

1. Remove the battery compartment cover as per the illustration on the right.
2. Observe the correct polarity and install a 3V lithium battery (CR2025).
3. Close the cover.

SUPPLY

• Connect the power cord (13) to a 100-240V 50/60Hz power outlet.
• Do not connect the appliance to electrical outlets other than those indicated.
• Note: Unless otherwise specified, the descriptions of the commands apply to both the device and the remote control.

ON/OFF

• Press the main switch (‘..) (1) on the unit to turn on the unit. It will turn on to the CD-MP3 player function;
• Press and hold the STANDBY/MODE button (2) to put the unit into Standby mode;
• Press the STANDBY/MODE button (2) to turn the unit back on;
• Press the main switch (‘..) (1) to turn off the unit completely.

Note:
In CD, USB, or AUX source, if no operation is performed within 10 minutes, the unit will automatically enter STANDBY mode.

VOLUME CONTROL AND EQUALIZER FUNCTION

1. Turn the Volume control (6) on the appliance or press the VOL +/- keys (25) on the remote control to increase or decrease the volume;
2. Press the EQ button (18) on the remote control several times to select one of the preset audio dynamics (Off, Classic, Rock, Pop, Jazz).

CD-MP3 PLAYER OPERATION

PLAYBACK

1. Switch on the appliance and press the FUNG button (17) on the remote control several times until DISC appears on the display.
   If there is no disc, the indication “NO” will appear on the display;

2. Open the CD compartment (8) by pressing the OPEN/CLOSE button (29) on the remote control and insert the disc with the written side facing up. Gently close the compartment;

3. After a few seconds, the display will show the number of tracks on the disc, and music playback will start automatically;

4. Press the button (19) on the remote control again to activate the pause. Press it again to start normal playback;

5. Press the button (22) on the remote control to stop playback permanently.

JUMP TRACE AND QUICK SEARCH

1. Press (4) and (3) on the unit, or the (26) and (20) buttons on the remote control to move to the previous or next track;
2. Press and hold (4) and (3) on the unit, or the (26) and (20) buttons on the remote control during playback to quickly search a particular musical passage. Release the button to return to normal playback.

REPEAT

• Press the RPT button (16) on the remote control until the flashing repeat symbol appears on the display to play the same track continuously.
• Press the RPT button (16) on the remote control until the solid repeat symbol appears on the display to continuously play all tracks.

ALBUM FUNCTION

NOTE:
Function valid only for MP3 CDs containing folders.

1. When playing an MP3 CD or USB with multiple folders, press the FOLD+ (28) and FOLD-(27) buttons to select the folder you want to play.

PROGRAMMING

You can select the order in which the tracks are played.

1. Press the button (22) on the remote control to stop playback;

2. Press the PROG button (24) on the remote control, and the message P01 appears on the display;

3. Select the track you want to play first with the keys (4) and (3) on the unit, or the keys (26) and (20) on the remote
   control;

4. Press the PROG button (24) on the remote control to confirm;

5. Repeat steps 3 and 4 to store and play the songs you want; for audio CDs, a maximum of 20 tracks can be stored, while for
   MP3/USB CDs a maximum of 99 tracks can be stored;

6. Press the VOLUME/ control (6) on the unit, or the (19) on the remote control to start playback;

7. Press the button (22) on the remote control twice to cancel programming.

USB INPUT OPERATION

1. Connect a USB memory device to the USB (9) input;

2. Switch On the appliance and press the FUNG button (17) on the remote control several times until the USB indication appears on the display, in the absence of the USB device, the display will show “NO”;
   Note: The device may not support some USB devices, this is due to the incompatibility of some processors.

3. For the rest of the functions, refer to the paragraph “CD-MP3 PLAYER OPERATION”.

INPUT LINE IN

1. Switch On the device and press the times FUNG button (17) on the remote control until the AUXIN indication appears on the display;
2. Connect any unit with audio output through the appropriate cable to the LINE IN (11) input;
3. Command the external unit from its commands;
4. Adjust the volume using the control (6) on the appliance or using the VOL +/- keys (25) on the remote control.

BLUETOOTH OPERATION

1. Switch On the appliance and press the FUNG button (17) on the remote control several times until the BT indication appears on
   the display;

2. The indication “BT” will start to flash on the display and the system will automatically enter the search;

3. Activate the Bluetooth functionality on the external device to be paired and make it visible;

4. Start the device search. At the end, look for the “HCX1 OF6” device;

5. Enter the password “0000” if necessary;

6. After pairing, the device will emit a notification sound, and the indication “BT” will remain on the display;

7. Start audio playback from your device;

8. Press (4) and (3) on the unit, or the (26) and (20) buttons on the remote control to move to the previous or next
   track;

9. Press the (19) button on the remote control to activate the pause. Press it again to deactivate the pause;

10. Press and hold the (19) button on the remote control to remove the coupling.

FM RADIO OPERATION

1. Switch on the appliance and press repeatedly the FUNG button (17) on the remote control until the TUNER indication appears on the display;

2. Press the buttons (4) and (3) on the unit repeatedly, or the (26) and (20) buttons on the remote control to increase or decrease the frequency 0, 1 MHz and perform a step-by-step search;

3. Hold down for a few seconds the buttons (4) and (3) on the unit, or the (26) and (20) buttons on the remote control to tune into the next station or previous radio station with the best signal received;

4. To start the automatic search and storage function of the radio station, long press the Volume/ control (6) on the unit or press the (19) button on the remote control.
   Note: The device is capable of storing up to 30 stations.

5. To store a radio station:

   • Goto the frequency to be memorized and keep the PROG key (24) pressed for a few seconds, the display will show the indication “PXX”, where XX stands for the location of the stored station;
   • Use the keys CH+ (21) and CH- (23) to select a memory location;
   • Press the PROG key (24) to confirm.

6. To call up a stored radio station use CH+ (21) and CH- (23) buttons.

Note:
To get the best FM reception connect and orient the antenna. If reception is not good try to adjust the length and orientation of the antenna differently, however the quality of FM reception depends very much on the place where the device is placed.

HEADPHONES

1. Insert the headphones into the headphone jack (7);
2. Start the desired playback and adjust the volume.

TECHNICAL SPECIFICATIONS

• Power and consumption: …………. 110-240V 50 / 60Hz – 22W
• Standby consumption: …………………………………………… < 0.5W
• Power Audio ……………………………………………….. 20W
• FM band reception: ………………………………… 87.5 – 108 MHz
• Bluetooth transmission power: ……………………………………………. 2.5mW
• Bluetooth transmission frequency: …………………………………………. 2.4GHz
• CD disc type: ……………………………. CD/CD-R-RW/MP3
• MP3 bit rate: ……………………….. MP3 (32 320 kbps)
• Unit dimensions: ……………………… 161 x 125 x 226 mm
• Speaker dimensions: ……………………… 102 x 161 x 112 mm

PRECAUTIONS FOR CORRECT DISPOSAL OF THE PRODUCT

The symbol shown on the equipment indicates that waste must be disposed of in “separate collection” and so the product must not be disposed of together with urban waste. The user must take the product to special “separate waste collection centers” provided by the local government, or deliver it to the retailer against the purchase of a new product. Separate collection of waste and subsequent treatment, recycling, and disposal operations promote the production of equipment with recycled materials and limit negative effects on the environment and health caused by improper handling of waste. Illegal disposal of the product leads to the enforcement of administrative penalties.

TREVI pursues a policy of continuous research and development, the products may show different characteristics from those described.

DECLARATION OF CONFORMITY

SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby TREVI Spa declares that the radio equipment type HCX 1 0F6 complies with directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.trevi.it/dms/zidi/TREVI/DOCHCX10F6.pdf.

If you will not find your language in the instruction manual, please go to our website www.trevi.it to find it.

MADE IN CHINA.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>