CELESTE CASERTA BT1300WH-170R Bathtub User Manual

CELESTE CASERTA BT1300WH-170R Bathtub

Product Specifications

• Model: CELESTE CASERTA 170 BACK TO CORNER R BT1300WH-170R
• Material: Acryl
• Included Components:
  • Bathtub Foot (Article number: TJLG.M12)
  • Pop-Up Drain (Article number: D9-1-WH)
  • Drain Pipe (Article number: XBG-L)

Product Usage Instructions

Tools and Materials Required

• Feet
• Drain

Step 1: Installation

Follow the instructions provided in the manual for the proper installation of the bathtub components.

Step 2: Maintenance

The bathtub is made of acryl and can be cleaned with a damp cloth and water with a mild detergent. Avoid using household detergents with aggressive, chlorinated, or abrasive constituents as they may damage the surface. Limescale can be removed with a product based on citric acid. Do not use acetic acid as it may irreversibly damage the acryl surface material.

FAQ

• Q: Can I use harsh detergents to clean the bathtub?
• A : No, avoid using household detergents with aggressive, chlorinated, or abrasive constituents as they may damage the surface of the bathtub.
• Q : How should I remove limescale from the bathtub?
• A: Limescale can be best removed with a product based on citric acid. Do not use acetic acid as it will irreversibly damage the acryl surface material.

TOOLS AND MATERIALS REQUIRED

Feet

Drain

Installation Instruction

Inspect the bathtub for damage before installation

Step 1

Fit the drain hose to the bathtub drain stopper. Tighten carefully

Step 2

Adjust the legs to the same height, and make sure that they are at the same level as the underside of the bathtub

Step 3

Step 4

Adjust the legs so that the bathtub is leveled

Step 5

Apply the silicone against the wall for stability.

Step 6

Important! Do not put silicone between the floor and the bathtub

Maintenance

The bathtub is made of acryl and can be cleaned with a damp cloth and water with a mild detergent. Household detergents with aggressive, chlorinated and/or abrasive constituents may not be used because this will damage the surface of the bathtub. Limescale can best be removed with a product based on citric acid. However, never use acetic acid, the acryl surface material will be irreversibly damaged.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>