INVENTUM GF500HLD Hot Air Fryer Instruction Manual

HOT AIR FRYER · HEISSLUFT FRITEUSE · FRITEUSE A AIR CHAUD
hetelucht friteuse
GF500HLD

Instruction manual

safety instructions

• Carefully and fully read the instruction manual prior to using the appliance and carefully store the manual for future reference.
• Caution! Avoid contact with hot surfaces within the appliance, when it is switched on.
• Never cover the air inlet and outlet openings when the appliance is being used.
• Always place the ingredients to be fried in the basket, to prevent them from making contact with the heating elements.
• Never fill the appliance with oil, this could cause a fire hazard.
• Never submerge the appliance, cord or plug in water.
• Only use this appliance for the purposes described in the instruction manual.
• Only connect the appliance to alternate current, to an earthed wall socket, with a mains voltage that corresponds with the information provided on the information plate of the appliance.
• Keep the appliance out of reach of children. Children do not see the dangers when handling electrical appliances. Therefore, never allow children to work with electrical appliances without supervision. Keep the appliance and cord out of reach of children younger than 8 years of age.
• The appliance can be used by children of 8 years and older and persons with a limited physical, sensory or mental capacity or lack of experience or knowledge, provided they use the appliance under supervision or have been instructed about its safe use and understand the hazards involved.
• Children are not allowed to play with the appliance.
• The appliance may not be cleaned or maintained by children, unless this is done under supervision.
• Do not use the appliance if the plug, cord or appliance are damaged, or if the appliance no longer functions properly or if it is damaged in any other way. If this is the case, consult the shop or our technical service. Never replace the plug or cord yourself. Repairs to electrical appliances should only be performed by skilled persons.
• Incorrect repairs could cause considerable hazards for the user. Never use the appliance with parts that are not recommended or supplied by the manufacturer.
• Never bend the power cord sharply or allow it to run across hot parts.
• Connect the appliance only to an earthed socket. Always check that the plug is properly inserted in the socket.
• Do not pull the cord and/or appliance to remove the plug from the wall socket. Never touch the appliance with wet or moist hands.
• Never connect the appliance to an external timer or a separate remote control system, in order to prevent hazardous situations.
• Never place the appliance near appliances that give off heat, such as ovens, gas cookers, hotplates, etc. Keep the appliance away from walls or other objects that could catch flame, such as curtains, towels (cotton or paper, etc.).
• Place the appliance on a sturdy, flat surface and make sure there is enough space around it for sufficient ventilation. A minimum space of 10 cm is required between the appliance and the walls. Place nothing on top of the appliance.
• Do not leave the appliance unsupervised if the appliance is operational.
• Caution! A lot of steam is released via the outlet openings during hot air frying. Keep your hands and face away from the steam coming out of the outlet openings. Watch out for the steam, when removing the pan.
• After use, the interior is very hot. Therefore avoid contact with the interior.
• Always make sure the appliance is placed on an even, flat surface and is only used indoors.
• This appliance is only intended for household use and not for use:
  • in staff kitchens, shops, offices and other work environments.
  • by guests of hotels, motels and other residential environments.
  • in Bed&Breakfast type environments
  • farms
• If the appliance is not being used or is being cleaned, switch off the appliance and remove the plug from the socket.
• Allow the appliance to cool down for 30 minutes before storing or cleaning it.
• Ensure that the ingredients being prepared in the appliance come out golden-brown and not dark or brown. Remove burnt parts.
• In case of a breakdown, never make repairs yourself; a blown safety device in the appliance could indicate a defect that cannot be remedied by removing or replacing this safety device. Only original parts should ever be used.
• This appliance is only suitable for household use. If the appliance is not used as intended, no compensation can be claimed in case of defects or accidents and the warranty will be invalidated.
• If you decide not to use the appliance any more due to a defect, we recommend cutting off the cord after removing the plug from the wall socket. Take the appliance to the waste processing department concerned of your municipality.

overheating safety system
This appliance has been provided with an overheating safety system. If the interior temperature is too high, the appliance is switched off automatically by the safety system. In that case, the appliance can no longer be used. Remove the plug from the socket, allow the appliance to cool down and contact the service department of Inventum or your retailer.

automatic deactivation
This appliance has been provided with a timer. Once the timer has counted down to 0, a beep sound can be heard and the appliance switches off automatically. In order to switch off the appliance manually, press “OFF” once to stop the frying process and press “OFF” a second time to switch off the display. Extra: when the pan is removed during use, the appliance will also switch off automatically.

electromagnetic fields (EMF)
This appliance complies with all requirements relating to electromagnetic fields (EMF).

product description

1. Air inlet openings
2. Operating panel
3. Basket| 4. Basket handle
5. Pan
6. Heating element
---|---

7. Automatic menus
8. Thermostat indicator
9. Display
10. Standby indicator – stop key
11. Menu key | 12. key – minutes
13. ο C key – temperature
14. ON and pause key
15. key (time/temperature down)
16. key (time/temperature up)
---|---

3. Basket
4. Basket handle
5. Pan| 17. Release button – basket
18. Grill rack
19. Skewers – 4 x
---|---

prior to first use

Before using the appliance for the first time, you should proceed as follows: carefully unpack the hot air fryer and remove all packaging material and any romotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking the appliance, check it for external damage that may have occurred during transport. Place the hot air fryer on a sturdy, flat and heatresistant surface.
The keys used to operate the hot air fryer are touch controls. Carefully touch the controls with a finger to activate. At each touch of a touch control, you can hear a sound signal.

STANDBY
As soon as you insert the plug in the socket, the hot air fryer is in the standby position. The standby key lights up red.
In the following situations, the hot air fryer will automatically switch to the standby position:

• when you insert the plug in the socket
• if no key is touched for a period of 60 seconds
• when the set time has elapsed
• when you press the standby key for 3 seconds.

SWITCHING ON/OFF
Switch on the hot air fryer with the standby key

• The hot air fryer only functions if the basket has been placed in the pan correctly.
• As soon as the set time has elapsed, the hot air fryer will automatically switch to the standby position: The fan does continue to run in order to allow the hot air fryer to cool down. After approximately 20 seconds, 5 beeps will sound and the fan symbol is switched off.

BEFORE USING FOR THE FIRST TIME
Check that the voltage corresponds with what is stated on the information plate and insert the plug in an earthed socket. The heating element is provided with a protective layer that must be removed prior to first use. This is done by setting the hot air fryer to the maximum position for approximately 10 minutes without any  food in the appliance. Light smoke may form due to the protective layer burning off the heating element. Therefore, ensure proper ventilation in the room. After removing the protective layer you can switch off the hot air fryer.

Remove the plug from the socket and clean the individual components before you actually start using the hot air fryer. Clean the basket, pan, grill rack and skewers with warm water, a mild washing-up liquid and a soft sponge. Tip: these components may also be cleaned in the dishwasher.
Clean the interior and exterior of the appliance with a damp cloth.

This fryer works with hot air. Do not fill the pan with oil or frying fat.

• Place the hot air fryer on a heat-resistant flat surface.
• Properly place the basket in the pan.
• Place the pan in the hot air fryer.
  CAUTION! Properly place the pan in the hot air fryer, otherwise it will not function.
  Do not fill the pan with oil or other liquids.
  Place nothing on top of the appliance.
  Do not place anything over the air inlet openings. This will disrupt the air circulation and will have a negative effect on the frying result.

SETTING TEMPERATURE AND TIME
Use the and keys to set the temperature and time. Press the ο C or Min key to change between temperature and time display.
The display automatically changes every 5 seconds if no key is used any more.

• The ο C key is only visible when the temperature is shown in the display.
• The Min key is only visible when the time is shown in the display.

AUTOMATIC MENUS
Press the menu key to select the following modes:

The temperatures and times in the table are indications. Depending on size and weight, it may be necessary to adjust temperature and time. It is possible to adjust the set temperature and time of the automatic menus. This is not possible when using the Preheating programme .

hot air frying

The hot air fryer can be used to prepare a wide range of dishes.

1. Check that the voltage corresponds with what is stated on the information plate and insert the plug in an earthed socket. The full display briefly lights up and the hot air fryer is in the standby position. The standby key lights up red.

2. Carefully remove the pan from the hot air fryer by its handle.

3. Place the ingredients in the basket. Caution: never exceed the recommended amount and never fill the basket above the maximum, as the food could make contact with the heating element in that case.

4. Properly slide the pan back in the hot air fryer. Never use the pan without the basket. If the pan is not properly placed in the hot air fryer, the appliance will not function. Caution: do not touch the pan during and shortly after use, as it gets very hot. Only hold the pan by its handle.

5. Press the standby key to switch on the hot air fryer. The display shows the preset of 190°C and 3 minutes.

6. Select an automatic menu with the key and set the time ( 1 – 60 minutes ) and temperature ( 80 – 200°C ) yourself.
   Tip: add 3 minutes to the cooking time when the hot air fryer is cold or use the automatic menu Preheating.

7. To switch on the hot air fryer, you then press the ON key
   • The display alternates between the set time and set temperature.
   • The display shows the remaining time. Time and temperature can be adjusted during frying by pressing the or key.
   During hot air frying, the fan symbol changes colour. Green means that the fryer has reached the required temperature.
   • When the fan symbol  is red, the hot air fryer is heating up.
   • Excess oil dripping from the ingredients is collected in the pan.

8. Some ingredients must be shaken halfway the cooking time. Take the pan from the hot air fryer by its handle and place it on a heat-resistant surface, such as a pan coaster. Press the release button of the handle and lift the basket from the pan. Shake the contents of the basket above the pan to prevent leaking and click back the basket in the pan. Then slide back the pan in the hot air fryer to continue frying. Then press the ON key to continue the frying process.

9. As soon as the set time has elapsed, the hot air fryer will automatically switch to the standby position: The fan does continue to run in order to allow the hot air fryer to cool down. After approximately 20 seconds, 5 beeps will sound and the fan symbol is switched off. Pull the pan from the hot air fryer by its handle and place it on a heat-resistant surface, such as a pan coaster. Check that the ingredients are cooked.
   If the ingredients are not yet cooked, place the pan back in the hot air fryer, set the timer for an extra few minutes and then press the ON key

10. To remove small ingredients (such as fries), press the button of the handle and lift the basket from the pan.
    Do not hold the basket upside down while the pan is still attached. The excess fat accumulated on the bottom of the pan will spread all over the ingredients.
    After hot air frying, the pan and the ingredients are hot. Depending on the type of ingredients, it is possible that steam comes out of the pan.
    After hot air frying, the pan and the metal interior are very hot, avoid contact with these components.

11. Empty the basket onto a dish or plate. In case of large ingredients, use tongs.

PAUSE

• Press the ON/Pause key to pause the hot air frying process. The indicator flashes. Press the ON/Pause key again to resume the hot air frying process.
• The hot air frying process is also paused when you remove the pan from the hot air fryer.
  Caution: the display switches off completely. When you place the pan back in the hot air fryer, the display switches on and the hot air frying process is resumed.

tips

• Smaller ingredients usually require a slightly shorter cooking time.
• A larger amount of ingredients only requires a little more time, and a smaller amount requires a little less cooking time.
• Shaking smaller ingredients several times during the cooking time results in a better and more even end result.
• Do not cook extremely fat ingredients such as sausages in the hot air fryer.
• Snacks that can be cooked in the oven, can also be cooked in the hot air fryer.
• The optimum amount for preparing crispy fries is 1000 grams. The maximum amount is 1500 grams.
• If necessary, use an oil spray to lightly oil the ingredients and make them even more crispy.
• Use ready-made dough for a fast and simple preparation of filled snacks. Ready-made dough also cooks faster than home-made dough.
• Place a baking tin or oven dish in the basket if you want to make a cake or quiche, or if you want to cook delicate or filled ingredients.
• The hot air fryer can also be used to reheat ingredients. For this, set the temperature to 150°C for 10 minutes.
• Add 3 minutes to the cooking time if the hot air fryer is still cold.
• As the turbo hot air technology immediately reheats the air in the appliance, briefly removing the pan from the hot air fryer does not have an effect on the end result.

As ingredients can differ in origin, dimension, shape and brand, Inventum is unable to indicate the most optimum setting.

cleaning and maintenance

Clean the hot air fryer after every use.

Before cleaning the hot air fryer, allow it to cool down fully.
Do not touch the metal interior in order to clean it, when frying has just been completed.
When cleaning the pan and basket, do not use metal kitchenware or abrasive agents, as these could damage the anti-stick coating.

1. Remove the plug from the socket and allow the hot air fryer to cool down fully.
   Tip: remove the pan from the hot air fryer to allow the appliance to cool down faster.

2. Clean the exterior of the hot air fryer with a damp cloth.

3. Clean the pan and basket with hot water containing a little washing-up liquid and a sponge. The pan and basket may also be cleaned in the dishwasher. A degreaser can be used to remove remaining dirt.
   Tip: fill the pan with hot water and a little washing-up liquid and allow it to soak for 10 minutes to remove persistent dirt.

4. Clean the interior of the appliance with hot water and a soft sponge.

5. Clean the heating element with a soft washing-up brush to remove any food residues. Be careful with washing-up liquid. This could be left behind on the heating element and give a foreign taste to the ingredients.

Never submerge the appliance, cord or plug in water or other liquids.
Before storing the hot air fryer, allow it to cool down fully and remove the plug from the socket. Check that all components are clean and dry. Store the hot air fryer in a clean and dry location.

breakdowns and solutions

The hot air fryer does
not function.| The plug is not in the socket.| Insert the plug in an earthed socket.
The pan is not properly
placed in the appliance.| Properly slide the pan in the appliance.
The ingredients are not cooked.| The amount of ingredients
in the basket is too much.| Place smaller amounts of ingredients
in the basket. Smaller portions
can be fried more evenly.
The set temperature is too low.| Set the hot air fryer to a higher temperature.
The cooking time is too short.| Set a longer time.
The ingredients are
not fried evenly.| Certain ingredients must be shaken
halfway the cooking time.| Ingredients lying on top of each other (such
as fries), must be shaken halfway the cooking time.
Fried snacks are not crispy when
they come out of the hot air fryer.| The snacks are not suitable for a hot
air fryer, but should be fried in oil.| Use oven snacks or cover the snacks with
a little oil for a more crispy result.
It is not possible to slide the
pan in the appliance properly.| The basket is overfilled.| Do not fill the basket above the maximum,
but observe the recommended amounts.
The basket is not properly
attached in the pan.| Press the basket in the pan until
you hear a click sound.
There is white smoke coming
from the appliance.| You are cooking fatty ingredients.| When fatty ingredients are being cooked in the hot air fryer, it is possible that a lot of fat drips in the pan. The fat causes white smoke and the pan can become hotter than normal. This does not have an effect on the appliance or on the end result.
The pan still contains fat residues
from a previous preparation.| Clean the pan after every use. Fat residues
that become hot can cause white smoke.
Fresh fries are not fried
evenly in the hot air fryer.| An unsuitable potato variety
has been used.| Use fresh potatoes that are a little
floury when cooked.
The fries have not been properly
rinsed prior to frying.| Properly rinse the cut fries to remove starch.
French fries are not crispy when
they come out of the hot air fryer.| The crispiness of the fries
depends on the amount of oil
and water in the fries.| Make sure the fries are properly patted
dry, before the oil is added.
Cut the fries more finely for a crispier result.
Add a little more oil for a crispier result.

general terms and conditions of service and warranty

We do not need to remind you of the importance of service. After all, we develop our products to a standard so that you can enjoy them for many years, without any concerns. If, nevertheless, there is a problem, we believe you are entitled to a solution straight away. Hence our products come with an exchange service, on top of the rights and claims you are entitled to by law. By exchanging a product or part, we save you time, effort and costs.

2-year full manufacturer’s warranty

1. Customers enjoy a 2-year full manufacturer’s warranty on all Inventum products. Within this period, a faulty product or part will always be exchanged for a new model, free of charge. In order to claim under the 2-year full manufacturer’s warranty, you can either return the product to the shop you bought it from or contact the Inventum costumer service department via the form at www.inventum.eu/service-aanvraag.
2. The 2-year warranty period starts from the date the product is bought.
3. In order to claim under the warranty, you must produce a copy of the original receipt.
4. The warranty applies only to normal domestic use of Inventum products within the Netherlands.

Breakdowns or faults outside the warranty period

1. Breakdowns or faults in small or large domestic appliances outside the warranty period, can be reported to the customer services department via the form at www.inventum.eu/service-aanvraag or by calling the customer services department.
2. The customer services department may ask you to send the product for inspection or repair. The costs of dispatch will be at your expense.
3. The inspection to establish whether repair is possible involves a charge. You need to grant your permission for this, in advance.
4. In the event of a large domestic appliance, Inventum, at your request, can send out a service engineer. In that case, you will be charged the call-out costs, as well as parts and labour.
5. In the event of an instruction to repair, the repair costs must be paid in advance. In the event of a repair by a service engineer, the costs of the repair must be settled with the engineer on site, preferably by means of PIN payment.

Warranty exclusions

1. The following is excluded from the aforesaid warranties:
   • normal wear and tear;
   • improper use or misuse;
   • insufficient maintenance;
   • failure to comply with the operating and maintenance instructions;
   • unprofessional installation or repairs by third parties or the customer himself;
   • non-original parts used by the customer;
   • use for commercial or business purposes;
   • removal of the serial number and/or rating label.

2. In addition, the warranty does not apply to normal consumer goods, such as:
   • dough hooks, baking tins, (carbon) filters, etc.;
   • batteries, bulbs, carbon filters, fat filters, etc.;
   • external connection cables;
   • glass accessories and glass parts such as oven doors;
   • and similar items.

3. Transport damage not caused by Inventum is also excluded. Therefore, inspect your new device before starting to use it. If you detect any damage, you must report this to the store where you purchased the product within 5 working days, or to the Inventum customer service department via the form at www.inventum.eu/service-aanvraag. If transport damage is not reported within this period, Inventum does not accept any liability in this respect.

4. The following are excluded from warranty and/or replacement: faults, loss of, and damage to the device as a result of an event that is normally insured under the home contents insurance.

Important to know

1. The replacement or repair of a faulty product, or a part thereof, does not lead to an extension of the original warranty period.
2. If a complaint is unfounded, all costs arising from it will be at the customer’s expense.
3. Following expiry of the warranty period, all costs of repair or replacement, including administration costs, dispatch, and call-out charges, will be charged to the customer.
4. Inventum cannot be held liable for damage caused by external events unless this liability arises from mandatory statutory provisions.
5. These warranty and service provisions are governed by Dutch law. Disputes will be settled exclusively by the competent Dutch court.

Inventum Huishoudelijke
Apparaten B.V.
Postbus 5023
6802 EA Arnhem
www.inventum.eu
instagram.com/inventum1908
facebook.com/inventum1908
youtube.com/inventum1908

Modifications and printing errors reserved

Reference:INVENTUM GF500HLD Hot Air Fryer Instruction Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>