protech PP2147 OBDII Engine Code Reader Diagnostic Tool User Manual
- June 6, 2024
- protech
Table of Contents
PP2147 OBDII Engine Code Reader Diagnostic Tool
USER MANUAL
OVERVIEW:
A great way to accurately identify car problems and avoid unnecessary or costly maintenance. This handy diagnostic tool plugs into the OBDII port of your car and displays the data from the engine system directly on the backlit 2.4” colour LCD screen. See engine performance real-time, quickly read and clear engine Diagnotsic Trouble Codes (DTC), turn off MIL light, perform an electrics cranking or charging test, check state emission monitor status, drive cycle verification, and much more. Works with most OBD2 compliant cars, SUVs and light duty vehicles sold worldwide since 1996.
Location of the Data Link Connector (DLC)
The DLC is usually located 30 cm (12”) from the centre of the instrumental
panel (dash), above or around the driver’s knees for most vehicles.
PRODUCT SPECIFICATIONS
PRODUCT OVERVIEW:
PRODUCT FEATURES:
- Dual-system diagnostic, optional engine and transmission.
- Quickly indicate engine fault codes, with green / yellow / red LED indicators as fault lights.
- To read or clear engine fault codes, 16929 diagnostic trouble code definitions can be inquired.
- Dynamic display of sensor data stream information, supporting 249 types of sensors.
- View freeze frame data and I/M status information.
- Read vehicle information: vehicle identification number (VIN), calibration identification number (CIN), calibration verification number (CVN).
- Test cranking and charging system of the vehicle.
- Multi-language support.
TOOL SETUP:
1. Language:
The factory default in English, other languages can be selected manually.
2. Unit of Measure:
Supports metric and imperial units. Factory default is metric.
3. Fn Key Set:
Set up Fn key as one-click quick test among “Usual Datastream”, “All
Datastream”, “I/M Readiness”, “Read Codes”.
DIAGNOSTICS:
Dual-system Selection
Start the car’s engine and plug the OBDII connector into the car’s OBDII
interface.
Enter the main interface, click the Enter key to start scanning the vehicle’s
(DLC) system, if only a single (engine) system is detected it will
automatically provide options for the engine system.
DTC Trouble Code Search
Search
OBD-II search powered by dot.report
If dual-systems are detected, it will allow you to select which system to diagnose.
1. $7E8: Engine – Engine System
2. $7E9: A/T – Transmission system
DIAGNOSTIC MENU
1. Read codes: Read the Diagnostic Trouble Code (DTC) in the engine or transmission system and display the standard definition.
2. Erase Codes: Clear all DTCs in the system.
3. Data Stream: Read and display all supported sensor data, up to 249 type of sensor.
4. Freeze Frame: The freeze frame data records the vehicle operating status information (fault code, vehicle speed, water temperature, etc.) at the moment when an emission-related fault occurs.
5. I/M Readiness: I/M Readiness function is used to check the operations
of the Emission System on OBDII compliant vehicles. Some latest vehicle models
may support two types of I/M Readiness tests:
A. Since DTCs Cleared – indicates status of the monitors since the DTCs
are erased.
B. This Drive Cycle – indicates status of monitors since the beginning of
the current drive cycle.
- “OK” : completed diagnostic testing
- “INC” : diagnostic testing is incomplete
- “N/A” : not supported
6. Vehicle Information: Review vehicle identification number (VIN) / calibration identification number (CIN) / calibration verification number (CVN)
DTC LOOKUP:
CRANKING SYSTEM TEST:
CHARGING SYSTEM TEST:
Distributed by:
Electus Distribution Pty. Ltd. 320 Victoria Rd, Rydalmere NSW 2116 Australia
www.electusdistribution.com.au
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>