FUJIFILM GF45-70mm F4.5-5.6 WR Lightweight Zoom Lens for GFX System Owner’s Manual
- June 6, 2024
- Fujifilm
Table of Contents
- FUJIFILM GF45-70mm F4.5-5.6 WR Lightweight Zoom Lens for GFX System
- For Your Safety
- Before Using This Product
- Parts of the Lens
- Supplied Accessories
- Attaching the Lens
- Removing the Caps
- Attaching the Hood
- Before Use
- Zoom
- Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FUJIFILM GF45-70mm F4.5-5.6 WR Lightweight Zoom Lens for GFX System
For Your Safety
Be sure to read these notes before use
Safety Notes
Thank you for your purchase of this product. For repair, inspection, and internal testing, contact your Fujifi lm dealer.
- Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use.
- After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.
WARNING: This icon indicates that death or serious injury can result if
the information is ignored.
CAUTION: This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indi-cate the nature of the instructions
which are to be observed.
- Triangular icons tell you that this information requires attention (“Important”).
- Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
- Filled circles with an exclamation mark indicate an action that must be performed (“Required”).
WARNING:
- Do not immerse in or expose to water. Failure to observe this precaution can cause a fi re or electric shock.
- Do not disassemble. Failure to observe this precaution can cause fi re, electric shock, or injury due to product malfunction.
- Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the camera battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation.
- Do not place on unstable surfaces. The product may fall, causing injury.
WARNING: Do not view the sun through the lens or camera viewfinders.
Failure to observe this precaution can cause permanent visual impairment.
CAUTION:
- Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fi re or electric shock.
- Do not leave in direct sunlight or in locations subject to very high temperatures, such as in a closed vehicle on a sunny day. Failure to observe this precaution can cause fi re.
- Keep out of the reach of small children. This product could cause injury in the hands of a child.
- Do not handle with wet hands. Failure to observe this precaution can cause electric shock.
- Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame can cause fi re or burns.
- When the product is not in use, re-place the lens caps and store out of direct sunlight. Sunlight focused by the lens can cause fi re or burns.
- Do not carry the camera or lens while they are attached to a tripod. The product can fall or strike other objects, causing injury.they are attached to a tripod. The product can fall or strike other objects, causing injury.
For Customers In the USA
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be de-termined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a cir-cuit diff erent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- You are cautioned that any changes or modifi -cations not expressly approved in this manual could void the user’s authority to operate the equipment.
Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifi lm-specifi ed ferrite-core A/V cable, USB cable, and DC supply cord.
For Customers In Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water (excluding waterproof products).
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as ra-diators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specifi ed by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualifi ed service personal. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the ap-paratus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Disposal of Electrical and Electronic Equipment In Private HouseHolds
In the European Union, Norway, Iceland and Liechtenstein: This symbol on the
product, or in the manual and in the warranty, and/or on its packaging
indicates that this product shall not be treated as household waste. Instead
it should be taken to an applicable collection point for the recycling of
electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent
potential negative conse-quences to the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve nat-ural resources. For more
detailed information about recycling this product, please contact your local
city offi ce, your household waste disposal service or the shop where you
purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If
you wish to discard this product, including the batteries or accumulators,
please contact your local authorities and ask for the correct way of disposal.
Before Using This Product
The lens may not perform as expected and some features may not be available
with an outdated lens or camera firmware. Be sure to update the lens and
camera firmware to the latest versions. Instructions on viewing firmware
version information and updating firmware are available from the following
website:
https://fujifilm-x.com/support/download/firmware/
If you do not have access to a computer, support is available from the local
distributor listed in the “FUJIFILM Worldwide Network” material provided with
your camera.
Product Care
-
When using a lens hood, do not pick up or hold the camera using only the hood.
-
Keep the lens signal contacts clean.
-
Use a blower to remove dust and lint from the glass surfaces of the lens or filter. To remove smudges and fingerprints, apply a small amount of lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers.
-
Never use organic solvents such as paint thinner or benzene to clean the lens. Attach the front and rear caps when the lens is not in use.
Store the lens and filter in cool, dry locations to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls. -
Keep the lens dry. Rusting can cause irreparable damage. Wipe off rain and water droplets. Leaving the lens in extremely hot locations could cause damage or warping.
Parts of the Lens
- A Lens hood
- B Mounting marks
- C Focus ring
- D Zoom ring
- E Mounting marks (focal length)
- F Lens signal contacts
- G Front lens cap
- H Rear lens cap
Note: The lens mount includes a rubber ring to ensure that the lens remains dust- and splash-proof. The ring can be replaced for a fee at any Fujifi lm service center.
Supplied Accessories
- Front lens cap
- Rear lens cap
- Lens hood
- Lens pouch
Attaching the Lens
See the camera manual for information on attaching and removing lenses.
Note: This lens is for use exclusively with FUJIFILM G mounts and cannot be
used with X mounts.
Removing the Caps
Remove the caps as shown.
Attaching the Hood
When attached, lens hoods reduce glare and protect the front lens element.
Before Use
This lens is retractable. Before use, extend the lens by rotating it clockwise as shown. Pictures can be taken when the focal length shown by the index is in the supported range.
Note: To retract the lens, rotate it counterclockwise until the focal length index aligns with the z mark.
Zoom
Rotate the zoom ring left to zoom out, reducing magnifi ca-tion and increasing
the area visible in the frame. Rotate the ring right to zoom in, increasing
magnifi ca-tion so that the sub-ject occupies more of the frame.
Note: Using the zoom ring while the lens is wet makes it easier forwater
to fi nd its way inside the lens. Wipe any water from the lens before using the
zoom ring.
Aperture: See the camera manual.
Specifications
Type | GF35-70mmF4.5-5.6 WR |
---|---|
Lens construction | 11 elements in 9 groups (1 aspherical element, 2 ED |
elements)
Focal length (35 mm format equivalent)| f=35–70 mm (28–55 mm)
Angle of view| 76°–42.7°
Max. aperture| f/4.5–5.6
Min. aperture| f/32
Aperture control
Number of blades Stop size
|
9 (rounded diaphragm opening)
EV (18 stops)
Minimum focus distance (measured from focal plane)| 35 cm
Max. magnification| T : 0.28 ×
External dimensions: Diameter × Length* (approx.)
- distance from front of lens to lens mount flange
| Lens retracted : ⌀84.9 × 73.9 mm
W : ⌀84.9 × 96.4 mm
T : ⌀84.9 × 95.7 mm
Weight* (approx.)
- excluding caps and hoods
| 390 g
Filter size| ⌀62 mm
- Improvements may result in unannounced changes to specifi cations and appearance.
- Owing to how this lens is constructed, the “Distance indicator” displayed by the camera may in some cases diff er from the actual focus distance. Use the “Distance indicator” as a guide only.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>