NICOR NLCSPEW1WH NLC Wireless End-Mount PIR-Daylight Sensor Instruction Manual
- October 27, 2023
- NICOR
Table of Contents
NLC | Network Lighting Controls
INSTALLATION INSTRUCTIONS
NLCSPEW1WH
NLCSPEW1WH NLC Wireless End-Mount PIR-Daylight Sensor
! IMPORTANT SAFEGUARDS !
WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE FOLLOWING:
- Do not use outdoors.
- Do not use this equipment for other than its intended use.
- The installation should be performed by a licensed electrician.
- To prevent death, injury or damage to property, this product must be installed in accordance to National Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA 22.1) in Canada.
- Disconnect power before installing the product or servicing it.
- Wait until fixture has cooled down before installing or servicing the fixture.
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
What’s In The Box| Tools Needed
A pair of wirecutters will be needed for installation.
---|---
|
1 Carefully unpack the unit from its packaging. Inspect product for defects
due to shipping.| 2 Turn off power to appropriate circuit at the breaker
panel.
---|---
|
3 Locate fixture knock-out and remove from attachment.| 4 Insert NLCSPEW1WH
inside the knockout hole.
|
5 Secure the NLCSPEW1WH with the screw nut. Attach lens of choice*.| 6 Turn
power ON and follow the Nicor NLC commissioning guide.
|
|
---|---
https://play.google.com/store/apps/details?id=com.litetrace.nicor.bluetooth.light3|
https://apps.apple.com/cn/app/nicor-nlc/id1636236035?l=en
WIRING DIAGRAM
RESTORING FACTORY SETTING INSTRUCTIONS
Reset a sensor to factory settings by turning the power on and off multiple times.
Follow the steps below:
- Make sure the lights are off.
- Turn on lights for 8 seconds; then turn the power off for 10 seconds.
- Immediately turn the lights on and off, then wait for another 10 seconds. Repeat 3 times.
- Turn the lights on for 8 seconds, then turn the power off for another 10 seconds. Repeat 2 times.
- Turn the lights back on. Blinking lights indicate a succesful factory reset. All previous settings connected to the app has now been deleted.
Note: Waiting for at least 10 seconds will ensure that the fixture is
completely powered off.
The duration will vary depending on the driver and the power supply. If the
driver can cut power to the fixture within 3 seconds, then you may change the
waiting period from 10 to 3 seconds to facilitate a faster reset time.
LIMITED WARRANTY AND DISCLAIMERS OF WARRANTIES
Subject to the exclusions contained below, NICOR Inc. (NICOR) warrants that
the Network Lighting Controls (NLC) made by NICOR to be free from defects in
materials and workmanship, under normal consumer usage for a period of five
(5) years from date of purchase. This limited warranty is a consumer’s
exclusive remedy, and applies only to new products purchased and used by
consumers in the United States or Canada, which are accompaniedby this written
warranty.
This lmited warranty extends only to first consumer purchaser, and is not
transferable. A consumer wishing to invoke the terms of this warranty must
first obtain an RGA number within 30 days of discovery of the defect, and
return the product to NICOR for inspection. Once verified to be covered by
this limited warranty, NICOR will, at its discretion, repair, replace or
refund the purchase price of any product that does not conform to this limited
warranty.
This limited warranty covers only defects in material and workmanship
associated with normal installation and intended use of the product.
THIS LIMITED WARRANTY DOES NOT COVER THE FOLLOWING:
Normal wear and tear
Defects or damages resulting from improper installation, operation, storage,
misuse or abuse, accident, or neglect;
Defects or damages resulting from improper service, testing, adjustment,
installation, maintenance, alteration, connection to out-of specification
electrical service, corrosive or damp environments, or connection to
incompatible equipment or devices (e.g., connecting non-dimmable lighting
products to dimmers);
Damage which occurs in transit;
Power surges or overheating due to external conditions;
Acts of nature including but not limited to lightning strikes
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR
REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY
OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED. IN NO EVENT SHALL NICOR BE LIABLE, WHETHER IN CONTRACT OR IN TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF
ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE
PRODUCT TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F:
800.892.8393
www.nicorlighting.com
NLCSPEW1WH August 22, 2022 3:29 PM