NICOR DLE4-ROUGHIN-FRAME Rough In Frame for Remote Driver Canless LED Downlights Instruction Manual
- May 15, 2024
- NICOR
Table of Contents
NICOR DLE4-ROUGHIN-FRAME Rough In Frame for Remote Driver Canless LED
Downlights
Specifications
- Product Name: ROUGHIN-FRAME
- Usage: Rough-In Frame for Remote-Driver (Canless) LED Downlights
- Construction: Hanger Bars
- Dimensions:
- DLE4-ROUGHIN-FRAME
- Length (L): 7.78″ (197mm)
- Width (W): 5.29″ (134mm)
- Diameter (D): 4.25″ (107mm)
- DLE6-ROUGHIN-FRAME
- Length (L): 9.25″ (235mm)
- Width (W): 7″ (178mm)
- Diameter (D): 6.25″ (159mm)
- Compatibility:
- DLE4-ROUGHIN-FRAME compatible with: DGD4, DGC4, DGF4, DLE4, REL4, RELS4, RELR4
- DLE6-ROUGHIN-FRAME compatible with: CLR6, DLE6, REL6, RELS6, RELR6, REL6-UNV
Product Usage Instructions
Installation Guidelines:
- Identify the suitable location in the ceiling for the downlight.
- Place the ROUGHIN-FRAME in the chosen location, aligning it properly.
- Use the ROUGHIN-FRAME as a cutting guide/template for precise installation.
- Ensure proper wiring connections according to the downlight specifications.
- Secure the ROUGHIN-FRAME in place before installing the downlight.
Maintenance :
Regularly inspect the ROUGHIN-FRAME for any signs of damage or wear. Clean
gently with a dry cloth if needed.
Removal:
To remove the ROUGHIN-FRAME, carefully detach it from the ceiling and
handle it with care to avoid any damage.
FAQ
-
Q: Can the ROUGHIN-FRAME be used with any type of downlights?
A: The ROUGHIN-FRAME is specifically designed for use with Remote-Driver (Canless) LED Downlights. Make sure to check compatibility before use. -
Q: How do I know if the ROUGHIN-FRAME is aligned correctly in the ceiling?
A: Ensure that the dimensions and placement of the ROUGHIN-FRAME match the requirements provided in the installation manual of your downlight.
ROUGHIN-FRAME
Rough-In Frame for Remote-Driver (Canless) LED Downlights
Product Description
The ROUGHIN-FRAME is designed to aid in installation of the remote-driver (canless) downlights by providing a clear location indicator for wiring and installation placement acting as a cutting guide/template within a finished ceiling. It is suitable for use in residential and commercial applications.
Construction
Galvanized steel frame
Hanger Bars
- Heavy-gauge NICOR captive hanger bars provide greater stability, allowing housing to be positioned at any point within a 24” joist span, then locked in place with set screws
- Unique hanger bar lip design helps align frame to joist
- Four double-headed captive nails provide for ease of installation
- Bars can be repositioned 90° on plaster frame by repositioning hanger bar brackets
- Bars fit onto T-bar spine for quick alignment and can be permanently secured
- Score lines allow bars to be shortened without tools to accommodate a 12” joist span
- Shallow design allows use in 2” x 6” joist construction
Dimensions
Dimensions
| Length (L)| Width (W)| Diameter (D)
DLE4-ROUGHIN-FRAME| 7.78” (197mm)| 5.29” (134mm)| 4.25” (107mm)
DLE6-ROUGHIN-FRAME| 9.25” (235mm)| 7” (178mm)| 6.25” (159mm)
Compatibility
DLE4-ROUGHIN-FRAME| DGD4, DGC4, DGF4, DLE4, REL4, RELS4, RELR4
DLE6-ROUGHIN-FRAME| CLR6, DLE6, REL6, RELS6, RELR6, REL6-UNV
Ordering Information| Example: DLE6-ROUGHIN-FRAME
---|---
Series| Description
DLE4-ROUGHIN-FRAME| Rough-in Frame for use with 4” Remote-Driver
(Canless) LED Downlights
DLE6-ROUGHIN-FRAME| Rough-in Frame for use with 6” Remote-Driver
(Canless) LED Downlights
Specifications and dimensions subject to change without notice.
NICOR, Inc. 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F:
800.892.8393 www.nicorlighting.com July 28,
2023 12:52 PM DLE6-ROUGHIN-FRAME