BRAUN IS3155VI CareStyle 3 PRO Steam Iron with FreeGlid Instruction Manual
- June 17, 2024
- Braun
Table of Contents
- BRAUN IS3155VI CareStyle 3 PRO Steam Iron with FreeGlid
- Product Information
- Product Usage Instructions
- Before use
- Description
- Intended use
- Before First use
- Settings
- Descaling
- Care & Cleaning
- Warranty and Service
- Troubleshooting guide
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BRAUN IS3155VI CareStyle 3 PRO Steam Iron with FreeGlid
Product Information
Specifications
- Type: 12830020
- Brand: Braun
- Model: CareStyle 3 Pro
Description
The CareStyle 3 Pro is an advanced ironing system designed to provide
efficient and effective ironing results.
Intended Use
The appliance is intended for ironing garments that are suitable for
ironing according to the care label. Do not iron or dampen garments while
wearing them.
Filling the Water Tank
Ensure the appliance is unplugged before refilling the water tank. Use tap
water or distilled water for optimal performance. Do not use condensation
water from a tumble dryer.
Product Usage Instructions
-
Before Use
Read the instructions carefully before using the appliance. Ensure your mains supply can handle the power requirements of the appliance. -
First Use
Refer to figure B for detailed instructions on initial setup before first use. -
Settings
Adjust settings as needed for different fabrics and ironing requirements. See figure C for detailed settings information. -
Iron Auto-Off
The iron has an auto-off feature after 10 minutes of inactivity. Refer to figure D for more details. -
Care & Cleaning
Follow proper care and cleaning procedures to maintain the appliance’s performance. See figure F for care and cleaning instructions. -
Entkalken (Descaling)
Refer to figure E for descaling instructions to ensure optimal functioning of the ironing system.
FAQ
Problem: Not enough water in the water tank
- Cause: The water tank is empty.
- Solution: Refill the water tank with water suitable for the appliance.
Problem: System error with all LEDs blinking
- Cause: System error detected.
- Solution: Contact customer service for assistance with the system error.
Before use
Please read the instructions carefully and completely before using the appliance.
Caution: Due to the high power of this appliance please make sure that your mains supply is sufficient. Please contact your local electric power company to make sure that the so called mains impedance is not higher than 0,266 Ohm.
Description
- On/Off button
- Clean system LED
- Clean button
- Mode button
- Eco mode indicator
- iCare mode indicator
- Turbo button
- Turbo mode indicator +
- Iron rest
- Lock system
- Removable water tank
- Power cord/Storage
- Steam button
- Temperature control LED
- Heel rest
- Cleaning vessel
- Double cord/Storage
Intended use
The appliance must be used only for ironing garments which are suitable for ironing according to the care label. Never iron or dampen garments while wearing them.
Filling the water tank
(for details refer to Fig. A)
Make sure the appliance is plugged off. You can refill the water tank at any
time during use. This appliance has been designed to be used with tap water.
However, if you live in an area with hard water, we recommend that you use
either distilled water or demineralized water to prolong the lifetime of the
appliance. Do not use condensation water from a tumble dryer.
Start into Operation
(for details refer to Fig. B)
Before starting ironing follow the garment care label instructions carefully.
Fabrics with this symbol are not ironable. For best ironing results, after
ironing with steam, perform the last strokes without steam.
Before First use
When steam is ready for the first time we recommend ironing for a few minutes over a rag to avoid manufacturing residues that can dirty your garments.
Settings
-
iCare
The iCare mode is automatically chosen when the appliance is switched on. It is suggested for garments like wool, polyester and cotton/linen. -
eco
It is suggested for most delicate garments like synthetics, silk and blended fabrics. This mode allows less power consumption. -
turbo + (max. steam)
It is suggested for garments that need more powerful steam, like thick cotton/linen and jeans.
Note: The pump is activated each time you press the steam button. It produces some subtle rattling noise which might change from setting to setting. This is normal.
Iron Auto-Off (for details refer to fig. D)
If this function is activated the mode LED corresponding to the chosen steam
setting starts flashing.
Descaling
-
The system will remind you to describe it regularly independent of the type of water used. Descaling can be performed at any time needed even when not indicated by the system.
-
If the clean LED (2) and the acoustic signal turn on during an ironing session, it is possible to continue ironing. There is no need to perform the cleaning immediately. The cleaning procedure can be performed when the ironing session has been fi nished or the next time the appliance is switched on.
-
If the appliance is switched off without having performed the cleaning process, the clean LED and acoustic signal will turn on again when it is next switched on. If there is no steam supply from the iron and the following conditions are present: clean LED “on”, temperature control LED “fl ashing” and acoustic signal “active” then the cleaning process will be mandatory to proceed with the ironing session.
Caution: Do not leave the appliance unattended during the descaling process. -
Always perform the descaling process with the cleaning vessel. Do not interrupt the process by lifting the iron from the cleaning vessel, as hot water and steam will come out of the soleplate.
Caution: The cleaning vessel can be hot and contains hot water, take care while moving and emptying it.
Care & Cleaning
Warranty and Service
For detailed information see the separate warranty and service leaflet or visit www.braunhousehold.com.
For UK Only
Guarantee Information
All Braun Household products carry a minimum guarantee period of two years.
The rights and benefi ts under this guarantee are additional to your statutory
rights which are not affected.
Please keep your receipt as this will form the basis of your guarantee.
In the unlikely event of a breakdown you have access to professional help from
our team simply by calling: 02392 392333
For service in the Republic of Ireland please call: 012475471
Braun Household undertakes within the specifi ed period to repair or replace
any part of the appliance, free of charge (except any glass or porcelain-ware
incorporated in the product) found to be defective provided that;
- We are promptly informed of the defect.
- The product is used and maintained by the User Instructions.
- The appliance has not been altered in any way or subjected to misuse or repair by a person other than an authorised service agent for Braun Household.
- No rights are given under this guarantee to a person acquiring the appliance second-hand or for commercial or communal use.
- Any repaired or replaced appliance will be guaranteed on these terms for the unexpired portion of the guarantee.
- The need for repair has not been caused by insuffi cient aftercare or cleaning: or damage caused by the chemical or electrochemical eff ects of water.
- Under no circumstances shall the application of this guarantee give rise to the complete replacement of the appliance or entitle the consumer to damages.
Braun Household, New Lane, Havant,
Hampshire PO9 2NH
www.braunhousehold.co.uk
Thank You for choosing Braun. We are confi dent that you will get excellent
service from this product.
TO IMPROVE YOUR EXPERIENCE
Register now at www.braunhousehold.co.uk
By registering we may send you from time to time details on exclusive off ers,
promotions, recipes and inside tips.
Troubleshooting guide
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|---|---|
The iron does not produce any steam | When starting your ironing session the | |
steam button has not been pressed long enough | Press and hold the steam button |
until steam comes out. It may take up to 30 seconds until steam comes out
There is not enough water in the water tank| Fill the water tank
If the clean system LED turns on, the steam function has been disabled until
you have performed the cleaning process| Perform the cleaning process ( see
dedicated chapter)
The iron is heating up| When the temperature control LED is flashing, the iron
is heating up; during this phase the steam function is disabled. Wait until
the temperature control LED turns permanently on.
The appliance has switched off| The auto-off mode is activated automatically
when there has been no steam emission for more than 20 minutes| Press the
On/Off button to re-activate
During steam emission the system produces a pumping noise associated with
vibrations| If the water tank is full – this is a normal working condition| No
action required
The water tank is empty| Switch off the system, unplug and fill the water tank.
Press the steam button untill the steam comes out.
Water droplets come out of the soleplate| Steam condenses into water in the
hose when you use steam for the first time or have not used it for a long time|
This is normal. Hold the iron away from the garment and press the steam
button. Wait until steam instead of water comes out of the soleplate
During ironing white particles and impurities are
coming out from the soleplate
| Your tap water is very hard| If your tap water is hard we recommend you use
either distilled water or demineralized water
Impurities of chemicals present in the water have deposited in the steam vents
and/or soleplate| Perform the cleaning process regularly even if not required
by the system
Water flushes out of the soleplate| The cleaning process has been activated
accidentally.| Switch off the appliance and unplug. Put the iron on the
cleaning vessel, switch on and perform the cleaning process completely ( see
dedicated chapter)
The first time the appliance is turned on, you notice smoke/smell| Some parts
have been treated with sealer/lubricant which evaporates the first time the
iron heats up| This is normal and will stop after the iron has been used a few
times. If the smoke/smell is still present after
turning off and cooling down, contact an authorized Braun Customer Service
All Leds are flashing| System error| Unplug the system, plug in again. If the problem is still present unplug immediately and contact an authorized Braun Customer Service
Register your product www.braunhousehold.com/register
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>